Shop By Product Matching "HVAC"
Choose your Engine for your 1997 Ford Windstar
Image
Product
Price
- HVAC Blower Motor Resistor
- w/Air Conditioning
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Mounting Hardware Included:
-
Features:
- Direct replacement - this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance - fixes a fan that's only operating on one speed or not working at all
- Thoroughly tested - examined and validated to perform safely and effectively
- Trustworthy quality - backed by team of engineers and inspectors in the United States
- Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20261, 33-31981, 3A1124, 4C2Z19A706BA, BMR036, BMR10, E7TZ19A706A, JA1176, JA1502, RU1013, RU318, ZZL161D85, ZZL261D85, ZZM161D85
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Ford Windstar | Front |
- HVAC Blower Motor Resistor
- w/Air Conditioning
- Product Attributes:
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Mounting Hardware Included:
-
Features:
- Direct replacement - this blower motor resistor matches the fit, function and performance of the original motor on specific vehicles
- Restores performance - fixes a fan that's only operating on one speed or not working at all
- Thoroughly tested - examined and validated to perform safely and effectively
- Trustworthy quality - backed by team of engineers and inspectors in the United States
- Blower motor resistor burnt out? Restore proper heating and cooling functionality with this direct replacement resistor designed to match the operation and performance of the original equipment on certain vehicles.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Ford Windstar | Rear |
- Blower Motor Speed Resistor and Harness Pigtail
- Includes Connector
- Product Attributes:
- Gasket Or Seal Included:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Gasket Or Seal Included:
-
Features:
- Direct replacement - this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
- Complete kit - each kit comes with a resistor and harness pigtail, which is essential for most repairs
- Restores functionality - made to perform like original equipment to restore full HVAC operation
- Trustworthy quality - backed by team of engineers and quality specialists in the USA
- This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20261, 3A1124, 4C2Z19A706BA, BMR036, E7TZ19A706A, JA1176, RU1013, RU318
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Ford Windstar | Rear |
- Blower Motor Speed Resistor and Harness Pigtail
- Includes Connector
- Product Attributes:
- Gasket Or Seal Included:
- No
- Non
- Mounting Hardware Included:
- No
- Non
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: Resistencia Del Motor Del Ventilador E Instrucciones
- Gasket Or Seal Included:
-
Features:
- Direct replacement - this blower motor resistor and harness kit directly replaces the original equipment on select vehicle years, makes and models
- Complete kit - each kit comes with a resistor and harness pigtail, which is essential for most repairs
- Restores functionality - made to perform like original equipment to restore full HVAC operation
- Trustworthy quality - backed by team of engineers and quality specialists in the USA
- This HVAC blower motor resistor kit includes a resistor and harness pigtail to replace an overheated or corroded original equipment resistor on certain vehicles.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Ford Windstar | Front |
Additional Fitment Information:
| Vehicle |
|---|
| 1997 - Ford Windstar |
- HVAC Air Door Actuator
- HVAC Air Door Actuator
- Product Attributes:
- Door Linkage: Male
- Wire Quantity: N/a
- Mounting Ear Qty.: 4
-
Features:
- Includes: lever arm, gear, cam gear hardware and linkage as applicable
- Quality internal motor, drive gears, electronics and connections
- Meets or exceeds OE specifications for fit and function
- Tested for function, durability and longevity
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
1711893, 2C2Z19E616AA, 604200, 6551549, 6C2Z19E616A, 73019, 974019, A27319, BDAC1031, DA1124, F58Z19E616A, F68Z19E616AA, J04004, MT18552, XC2Z19E616AA, YH1762
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Ford Windstar | Main |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 152
- 6
- End 1 Inside Diameter:
- .59
- 15
- Material: Epdm
- End 2 Inside Diameter:
- .59
- 15
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
10182356, 11026, 12590279, 12600100, 14156S, 19026, 626-107, 63121, 71692, 72337, 872450C260, A71692, B72337, F58Z 18472 R
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1997 - Ford Windstar | V | 2986 | Thermostat To Pipe-1 | GAS | 6 Cyl 3.0L | 182 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 124
- 4.9
- End 1 Inside Diameter:
- .75
- 19
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- .75
- 19
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10020454, 10065590, 10087632, 133643R1, 14-2660-4, 14034345, 14100667, 14211S, 1555179, 1945061, 2001, 2004, 2012, 20618, 22602073, 230572, 23121, 25502711...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1997 - Ford Windstar | V | 2986 | Tee-1 To Water Pump | GAS | 6 Cyl 3.0L | 182 |
- Cut to Length, 5"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1997 - Ford Windstar | V | 2986 | Pipe-1 To Tee-1 | GAS | 6 Cyl 3.0L | 182 |
- Cut to fit
- 90 Degree Molded Heater Hose
- Product Attributes:
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- .625
- 16
- Angle: 90
- Arm Length:
- 102
- 152
- 4
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
- Quick Connect Fitting Quantity: 0
-
Features:
- Resists electrochemical degradation and water permeation
- Use with heater hose connectors and bulk heater hose to create custom assemblies
- Compatible for coolant, air and water applications
- EPDM tube and cover, synthetic fiber reinforcement
- SAE 20R3 EC Class D1, SAE 20R4 EC Class D1
- Temperature Range: -40 Deg. F to +275 Deg. F (-40 Deg. C to +135 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- It can be difficult to find hoses that easily adapt to sharp bends in your assemblies. Gates created a 90 Degree Molded Heater Hose to make replacing hoses with existing sharp bends easy. Conveniently, our 38 sizes handle thousands of applications and are built to last.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0032224, 027004156, 05743507, 06006269, 07HS00043A, 07HS00044A, 0K01315421, 10002473, 10006390, 10018899, 10021318, 10038502, 10060964, 10065741, 10080395, 10135305, 10135333, 10145098...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1997 - Ford Windstar | V | - | Heater To Tee-1 | GAS | 6 Cyl 3.8L | 232 |
Showing 1 - 10 of 11 products
Loading...