Shop By Product Matching "HVAC"
Image
Product
Price
- Engine Heater Hose Assembly
- Heater Outlet to Water Pump
- Product Attributes:
- Diámetro exterior del extremo de la manguera (2) (in): 0.7 In
- End 3 Inside Diameter: 0.6
- Diámetro exterior del extremo de la manguera (3) (in): 0.83 In.
- End 3 Attachment Type: Flared
- Diámetro exterior del extremo de la manguera (1) (in): 0,87in
- Tipo de fijación del extremo 3: Sobresaliente
- Protective Sleeve Attached:
- No
- Non
- End 1 Attachment Type:
- Flared
- Sobresaliente
- End 2 Inside Diameter: 0.49
- Clamps Included:
- No
- Non
- Coolant Hose Type:
- Branched
- Ramificado
- End 2 Attachment Type:
- Flared
- Sobresaliente
- Hose End (1) Outside Diameter (In): 0.87 In
- Color:
- Black/coated
- Negro/revestido
- Thermostatically Controlled:
- No
- Non
- Coolant Hose Heat Shield Included:
- No
- Non
- Hose End (3) Outside Diameter (In):
- 0.83 In
- 0.83 In.
- Contenidos del paquete: Conjunto De Manguera Del Calentador
- End 1 Inside Diameter: 0.76
- Hose End (2) Outside Diameter (In): 0.7 In
- Maximum Working Pressure: 100
- Material:
- Acero
- Steel
-
Features:
- Ideal replacement - this HVAC heater hose assembly directly replaces the original heater hose on specified vehicle years, makes and models
- Durable construction - this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
- Cost-effective and reliable - offers original manufacturer quality at lower cost than getting replacement at dealer
- Industry-leading design - professionally engineered by the aftermarket leader in heater hose assemblies
- This replacement HVAC heater hose assembly is engineered to match the fit and durability of the stock heater hose assembly on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.
This Part Fits the Following OEM/Substitute Numbers:
HHA121, KGTE-6663, SK626210, XF2Z18663AA
Additional Fitment Information:
| Vehicle |
|---|
| 2002 - Ford Windstar |
- W/Aux. Heater; Cut to fit
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 191
- 7.5
- End 1 Inside Diameter:
- .72
- 18
- Material: Epdm
- End 2 Inside Diameter:
- .72
- 18
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
This Part Fits the Following OEM/Substitute Numbers:
11736, 140569E000, 14323S, 19130283, 19736, 22610689, 4596618AB, 64321, B91028
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Ford Windstar | V | - | Heater To Tee-1 | GAS | 6 Cyl 3.8L | 232 |
- Cut to Length, 24"
- Straight Heater Hose (Standard)
- Product Attributes:
- Molded: No
- Working Pressure: 60
- Weight Per Length: 11.70 Lbs./carton
- Centerline Length:
- 15.24
- 15240
- 600
- End 1 Inside Diameter:
- .625
- 16
- Material: Epdm
- End 2 Inside Diameter:
- .625
- 16
-
Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Get more out of your heater hose with Safety Stripe Heater Hose, constructed for extra-long service life. Intended for use on cars and light trucks, this EPDM hose is unaffected by most coolants, non-oil based coolant additives and high cooling system pressures. (Not recommended for heavy-duty trucks, buses, or off-road construction equipment; use Green Stripe heater hose for these applications.)
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K55261B16C, 0K55261B22F, 10023264, 10230417, 10427731, 12322342, 12368235, 12575636, 12600099, 12604941, 12639709, 12639710, 14055JK20A, 15024548, 15051852, 15051853, 15064188, 15064189...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2002 - Ford Windstar | V | - | Auxiliary Heater To Pipe | GAS | 6 Cyl 3.8L | 232 |
Showing 1 - 3 of 3 products
Loading...