Image
Product
Price
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 213
- 8.4
- End 1 Inside Diameter:
- 1.5
- 38
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.5
- 38
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
20376S, 22448, 2S7Z 8A567 AA, 2S7Z 8A567 AD, 4F22 8261 AA, 62732, 71728, 71984, 72385, 9081, B71728, B71984, B72385, F5RZ 8A567 A, GY0115536, KH337, KM-4392, XF22 8291 AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Ford Escape | V | 2968 | Water Pump To Thermostat | GAS | 6 Cyl 3.0L | 181 |
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length: 254
- End 1 Inside Diameter:
- 1.21
- 31
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.21
- 31
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
20368S, 22571, 64287, 72130, 9204, B72130, XS2E 8A577 AB, XS2Z 8A577 AB
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2003 - Ford Escape | V | 2968 | Water Pump To Intake Manifold | GAS | 6 Cyl 3.0L | 181 |
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Ford Escape |
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2003 - Ford Escape | 4WD |
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Ford Escape |
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Ford Escape | V | 2968 | 6 Cyl 3.0L | 181 |
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Ford Escape |
- HVAC Blower Motor For Ford F-150 Mustang Escape F-350 Super Duty F-250 Mazda HD
- without Connector
- Mpulse HVAC Blower Motor SEN-2BMR0293 For Ford F-150 Mustang Escape F-350 Super Duty F-250 Mazda Tribute Expedition HD Excursion Lincoln Navigator Heritage Mercury Mariner Villager F-Super
- Mpulse
- Product Attributes:
- WebNameEbay4: For Ford F-150 Mustang Escape F-350 Super Duty Hd Hvac Blower Motor Sen-2bmr0293
- ComponentsSummaryRegularWithBrands: Mpulse Hvac Blower Motor Resistor
- ComponentsSummaryShort: Hvac Blower Motor Resistor
- ComponentsSummaryLongWithBrands: 1x Mpulse Hvac Blower Motor Resistor
- WebNamePlain: Mpulse Hvac Blower Motor Sen-2bmr0293
- ComponentsSummaryShortWithBrands: Mpulse Hvac Blower Motor Resistor
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Hvac Blower Motor Resistor
- WebNameLong: Mpulse Hvac Blower Motor Sen-2bmr0293 For Ford F-150 Mustang Escape F-350 Super Duty F-250 Mazda Tribute Expedition Hd Excursion Lincoln Navigator Heritage Mercury Mariner Villager F-super
- WebNameShort: Hvac Blower Motor Sen-2bmr0293 For Ford F-150 Mustang Escape F-350 Super Duty F-250 Mazda Tribute Hd
- ComponentsSummaryRegular: Hvac Blower Motor Resistor
- WebNameRegular: Mpulse Hvac Blower Motor Sen-2bmr0293 For Ford F-150 Mustang Escape F-350 Super Duty F-250 Mazda Tribute Expedition Hd Excursion Lincoln Navigator Heritage Mercury Mariner Villager F-super
- WebNameEbay2: Hvac Blower Motor Sen-2bmr0293 For Ford F-150 Mustang Escape F-350 Super Duty
- WebNameEbay3: Hvac Blower Motor Sen-2bmr0293 For Ford F-150 Mustang Escape F-350 Super Duty Hd
- WebNameEbay: Hvac Blower Motor For Ford F-150 Mustang Escape F-350 Super Duty F-250 Mazda Hd
-
Features:
- mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
- Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
- Made with corrosion-free coating for highest durability on the market
- Direct plug-in OE replacement for proper fit and function for an unmatched experience
- mPulse offers an extensive range of sensors that restores your vehicle to factory levels of performance
- Part Reference Numbers : 4P1367 RU1076 973-414 2BMR0293 BR286 4L3Z-19A706-AA EC01-61-B15 EC01-61-B15A F4ZZ-19A706-A RU382
- Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2BMR0293, 4L3Z-19A706-AA, 4P1367, 973-414, BR286, EC01-61-B15, EC01-61-B15A, F4ZZ-19A706-A, N/A, RU1076, RU382
Additional Fitment Information:
| Vehicle |
|---|
| 2003 - Ford Escape |
Showing 1 - 8 of 8 products
Loading...