Image
Product
Price
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .25
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .25
- 6
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - Hyundai Accent | L | 1600 | Thermostat To Throttle Body | GAS | 4 Cyl 1.6L | - |
- Molded Heater Hose
- Product Attributes:
- Branch Quantity: 0
- Molded: Yes
- Centerline Length:
- 244
- 9.6
- End 1 Inside Diameter:
- .25
- 6
- Material: Epdm
- End 2 Inside Diameter:
- .25
- 6
- Quick Connect Fitting Quantity: 0
-
Features:
- Has all the quality features of Gates molded coolant hose and similar to OEM specifications
- Engineered to resist electrochemical degradation – the leading cause of hose failure
- EPDM tube, synthetic fiber knit reinforcement, EPDM cover
- Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
- Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. It can be used for coolant, water and air applications, also approved for marine applications.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K24715281D, 10010, 1319171C50, 1319172C50, 14000S, 1405453F11, 15802763, 1626111060, 1626764010, 1734376010, 18010, 19130290, 19130424, 19524P5A000, 19528P3FA50, 22633443, 22717008, 22733960...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2006 - Hyundai Accent | L | 1600 | Throttle Body To Thermostat | GAS | 4 Cyl 1.6L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2006 - Hyundai Accent | Canada | GLS |
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2006 - Hyundai Accent | Canada | GLS |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2006 - Hyundai Accent | GSi |
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2006 - Hyundai Accent | GSi |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2006 - Hyundai Accent | GSi |
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2006 - Hyundai Accent | GLS |
- HVAC Blower Motor For Hyundai Accent Santa Fe Kia Telluride Elantra Sorento
- without Connector
- Mpulse HVAC Blower Motor SEN-2BMR0047 For Hyundai Accent Santa Fe Kia Telluride Elantra Sorento Tiburon Sonata Amanti Optima XG350 XG300
- Mpulse
- Product Attributes:
- WebNameEbay4: For Hyundai Accent Santa Fe Kia Telluride Elantra Hvac Blower Motor Sen-2bmr0047
- ComponentsSummaryRegularWithBrands: Mpulse Hvac Blower Motor Control Module
- ComponentsSummaryShort: Hvac Blower Motor Control Module
- ComponentsSummaryLongWithBrands: 1x Mpulse Hvac Blower Motor Control Module
- WebNamePlain: Mpulse Hvac Blower Motor Sen-2bmr0047
- ComponentsSummaryShortWithBrands: Mpulse Hvac Blower Motor Control Module
- NumberOfPieces: 1
- ComponentsSummaryLong: 1x Hvac Blower Motor Control Module
- WebNameLong: Mpulse Hvac Blower Motor Sen-2bmr0047 For Hyundai Accent Santa Fe Kia Telluride Elantra Sorento Tiburon Sonata Amanti Optima Xg350 Xg300
- WebNameShort: Hvac Blower Motor Sen-2bmr0047 For Hyundai Accent Santa Fe Kia Telluride Elantra Sorento Tiburon
- ComponentsSummaryRegular: Hvac Blower Motor Control Module
- WebNameRegular: Mpulse Hvac Blower Motor Sen-2bmr0047 For Hyundai Accent Santa Fe Kia Telluride Elantra Sorento Tiburon Sonata Amanti Optima Xg350 Xg300
- WebNameEbay2: Hvac Blower Motor Sen-2bmr0047 For Hyundai Accent Santa Fe Kia Telluride
- WebNameEbay3: Hvac Blower Motor Sen-2bmr0047 For Hyundai Accent Santa Fe Kia Telluride Elantra
- WebNameEbay: Hvac Blower Motor For Hyundai Accent Santa Fe Kia Telluride Elantra Sorento
-
Features:
- mPulse unique technology ensures the electronic control systems track physical or substance changes and turn them into electrical indicators with unmatched precision
- Engineered with high-quality material to ensure long-term performance and the capability to resist high temperatures
- Made with corrosion-free coating for highest durability on the market
- Direct plug-in OE replacement for proper fit and function for an unmatched experience
- mPulse offers an extensive range of sensors that restores your vehicle to factory levels of performance
- Part Reference Numbers : 4P1467 RU2107 2BMR0047 BR417 97035-1C010 970351C010 97035-1E000 97035-1E100 97111-38000 97179-2D000 97235-26000 RU514
- Mpulse offers the ultimate sensors on the market. The unmatched performance and precision coupled with longer lasting components make our sensors the go-to choice of tousands of reputed mechanical shops in North America. Certified, designed and tested by our certified engineers.
This Part Fits the Following OEM/Substitute Numbers:
2BMR0047, 4P1467, 97035-1C010, 97035-1E000, 97035-1E100, 970351C010, 97111-38000, 97179-2D000, 97235-26000, BR417, N/A, RU2107, RU514
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Hyundai Accent | L | 1599 | 4 Cyl 1.6L | - |
Showing 1 - 9 of 9 products
Loading...