Shop By Product Matching "ICON Vehicle Dynamics"
Choose your Submodel for your 2022 Jeep Gladiator
Image
Product
Price
- with 2.5 (in) - 3.0 (in) Suspension Lift
- These billet aluminum front sway bar links correct the sway bar angle in vehicles with 2.5" of lift. High-quality FK rod end bearings eliminate bushing deflection for confidence inspiring handling and maximum articulation without binding.
- 18-UP JL/20-UP JT FRONT SWAY BAR LINK KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Grade Type: Performance
- Bushing Color: Gold
- Washers Included: Yes
- End 1 Type: Rod End Bearing
- Greaseable: No
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Grease Fittings Included: No
- Locking Nuts Included: Yes
- Pre-Greased: No
- Bolts Included: Yes
- Dust Boot Included: No
-
Features:
- Billet aluminum sway bar links with laser etched ICON logos
- Adjustable while installed on vehicle to fine tune sway bar angle
- High quality FK rod ends eliminate bushing deflection for improved handling
- These billet aluminum front sway bar links for your 2018-Up Jeep Wrangler JL and 2020-Up Jeep Gladiator JT correct the sway bar angle for use with 2.5" of lift while on vehicle adjustment allows for further fine tuning of the sway bar angle. High quality FK rod end bearings also eliminate bushing deflection common with stock bushings for confidence inspiring handling characteristics and allow for maximum articulation without binding.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Jeep Gladiator | Front |
- 18-UP JL/20-UP JT FRONT SWAY BAR LINK KIT
- with 2 (in) - 3 (in) Suspension Lift
- These billet aluminum front sway bar links correct the sway bar angle in vehicles with 2.5" of lift. High-quality FK rod end bearings eliminate bushing deflection for confidence inspiring handling and maximum articulation without binding.
- 18-23 JL/20-23 JT FRONT SWAY BAR LINK KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Grade Type: Performance
- Bushing Color: Gold
- Washers Included: Yes
- End 1 Type: Rod End Bearing
- Greaseable: No
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- End 2 Type: Rod End Bearing
- Adjustable: Yes
- Grease Fittings Included: No
- Locking Nuts Included: Yes
- Pre-Greased: No
- Bolts Included: Yes
- Dust Boot Included: No
-
Features:
- Billet aluminum sway bar links with laser etched ICON logos
- Adjustable while installed on vehicle to fine tune sway bar angle
- High quality FK rod ends eliminate bushing deflection for improved handling
- These billet aluminum front sway bar links for your 2018-Up Jeep Wrangler JL and 2020-Up Jeep Gladiator JT correct the sway bar angle for use with 2.5" of lift while on vehicle adjustment allows for further fine tuning of the sway bar angle. High quality FK rod end bearings also eliminate bushing deflection common with stock bushings for confidence inspiring handling characteristics and allow for maximum articulation without binding.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Jeep Gladiator | Front |
- Used with 1.38 (in) to 3 (in) Lift
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 20-UP JT 2.5" REAR 2.0 VS IR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: Yes
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Sport
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Dust Boot Included: Yes
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: No
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Front Spring Seat Included: No
- Suspension Type: Spring
- Material: Aluminum
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Internal Construction Type: Single Tube
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 2.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Jeep Gladiator | Rear | High Altitude |
- Used with 1.38 (in) to 3.00 (in) Lift
- ICON VS 2.0 Aluminum Series shocks are a high-quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Shocks are vehicle specific, 100% rebuildable, and 100% revalveable.
- 20-UP JT 2.5" REAR 2.0 VS IR
- Product Attributes:
- Cylinder Color: Gray
- Quantity: 1
- Bushing Color: Black
- Active or Passive Suspension: Passive
- Body Material: Aluminum
- Adjustable Ride Height: No
- Finish: Anodized
- Adjustable Compression: No
- Damping Type: Oil
- AAP_UDA_4: 55
- Dust Shield Material: Rubber
- Adjustable Rebound: No
- Body Color: Gray
- Bore Diameter: 1.75
- Service Parts:
- 252002 - Universal Spanner Wrench (2.0/2.5/3.0)
- 252004 - Economy Needle Charging Tool
- 254101g - 1/2 Gallon Icon Performance Shock Oil
- Dust Shield: Yes
- Cylinder Finish: Anodized
- Upper Mount Type: Eyelet
- Configuration: Sport
- Shaft Material: Chrome
- Rod Diameter: .625
- Lower Mount Type: Eyelet
- Coil Spring Insulator(s) Included: No
- Valving Type:
- Digressive
- Linear
- Dust Shield Included: Yes
- Shock Absorber Body End Measuring Point: Center Of Eylet
- Dust Boot Included: Yes
- External Reservoir: No
- Remote Reservoir: No
- Shock Absorber Bore Size: 1.75
- AAP_UDA_22: 1
- Bushing Included: Yes
- Mounting Hardware Included: No
- Grade Type: Performance
- Hydraulic Lockout: No
- Self-Leveling: No
- Internal Rebound Bumper: Yes
- Internal Rebound Spring: No
- Adjustable Damping: No
- Front Spring Seat Included: No
- Suspension Type: Spring
- Material: Aluminum
- Shaft Diameter: 0.625
- AAP_UDA_12: Ea
- Coil Over Springs Included: No
- Body Diameter: 2
- Gas Charged: Yes
- Cylinder Material: Aluminum
- Internal Construction Type: Single Tube
- California Prop 65 Warning: Yes
- Boot Included: Yes
- Shock Absorber Rod End Measuring Point: Center Of Eylet
- Cylinder Outside Diameter: 2
- Maximum Ride Height Raising Distance: 2.5
- Includes Bump Stop: No
-
Features:
- Premium grade 5WT shock oil for consistent suspension damping along a wide temperature range
- Nitrogen charged monotube design with internal reservoir
- One piece linear/digressive piston design with vehicle specific valving for unsurpassed performance and ride quality on and off-road
- 5/8” chrome plated hardened steel shaft resists corrosion and pits
- 6061 aluminum rod end, top cap, and internals ensure strength and durability
- Polyurethane bushings, zinc plated sleeves, and forged steel mounting stems for OE factory type fitment
- 6063 anodized aluminum body for superb heat dissipation, excellent corrosion resistance, and high-tech appearance
- Nitrile rubber top out bumper for noise free operation
- 100% rebuildable
- 100% revalveable
- ICON Vehicle Specific (V.S.) 2.0 Aluminum Series shock absorbers are the ultimate in cost effective upgrades, specifically tailored by ICON engineers for your application. The V.S. 2.0 Aluminum Series shocks are a high quality upgrade for the everyday street driver and weekend warrior looking for improved on and off-road performance. Like all ICON shock absorbers, V.S. 2.0 Aluminum Series shocks are 100% rebuildable and 100% revalveable. For those using their vehicle in extreme off road situations, consider the ICON V.S. 2.5 Series shock to handle extra abuse and punishment your suspension will need to endure.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Jeep Gladiator | Rear | Sport S |
- 18-23 JL/20-23 JT FRONT FIXED LOWER LINK KIT
- with 2.5 (in) - 3.0 (in) Suspension Lift
- ICON’s tubular front lower link arms are a significant upgrade over factory units due to increases in strength, performance, and improved alignment capability. They feature maintenance free bushings for increased suspension articulation.
- 18-UP JL/20-UP JT FRONT FIXED LOWER LINK KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: 2
- Bushing Color: Black
- California Prop 65 Warning: Yes
- Control Arm Material: Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: No
- Pre-Greased: No
- Construction: Tubular
- Suspension Grade Type: Performance
- Control Arm Color: Black
- Suspension Type: Spring
- Material: Dom Steel
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Integrated brake line bracket mount
- Dual stage powder coat for excelled corrosion resistance
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel front lower link arms for the Jeep Wrangler JL and Gladiator are a significant upgrade over the factory units due to increases in strength and performance as well as improved alignment specs. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This front lower link arm kit features multi durometer bushings that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The increased range of motion provided by these bushings allows the suspension function as intended, without the bushing bind that limits the vehicle in stock form.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Jeep Gladiator | Front Lower |
- Use Up To 37 (in) x 12.50 (in) Tires with 2.5 (in) - 3.0 (in) Suspension Lift -6 (mm) Offset Aftermarket Wheels Recommended
- ICON’s tubular front lower link arms are a significant upgrade over factory units due to increases in strength, performance, and improved alignment capability. They feature maintenance free bushings for increased suspension articulation.
- 18-23 JL/20-23 JT FRONT FIXED LOWER LINK KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Grade Type: Performance
- Mounting Hardware Included: Yes
- Quantity: 2
- Bushing Color: Black
- California Prop 65 Warning: Yes
- Control Arm Material: Steel
- Finish: Powdercoated
- AAP_UDA_4: 55
- Control Arm Construction: Tubular
- Grease Fitting Included: No
- Adjustable: No
- Pre-Greased: No
- Construction: Tubular
- Suspension Grade Type: Performance
- Control Arm Color: Black
- Suspension Type: Spring
- Material: Dom Steel
-
Features:
- CNC machined & notched 1026 DOM steel construction
- Multi durometer bushing for noise free operation and maximum angularity
- No grease required for life of bushings
- Integrated brake line bracket mount
- Dual stage powder coat for excelled corrosion resistance
- ICON1K tested in extreme off-road conditions
- Fabricated components covered under ICON's lifetime warranty
- ICON’s tubular steel front lower link arms for the Jeep Wrangler JL and Gladiator are a significant upgrade over the factory units due to increases in strength and performance as well as improved alignment specs. These components are made from CNC machined and notched 1026 DOM steel and welded in-house, providing a major improvement over the construction of the stock units. This front lower link arm kit features multi durometer bushings that allows for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance. The increased range of motion provided by these bushings allows the suspension function as intended, without the bushing bind that limits the vehicle in stock form.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Jeep Gladiator | Front Lower |
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Front Raise Height 2.5 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.50” Backspace / -6mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Jeep Gladiator | Front | Mojave |
- Raises Front 2 (in) -6 (mm) Offset Aftermarket Wheels Recommended Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2022 - Jeep Gladiator | Front | GAS | Altitude |
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Front Raise Height 1.75 (in) Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Recommended Aftermarket Wheel Size: 17x8.5" with 4.50” Backspace / -6mm Offset Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys | 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys | 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2022 - Jeep Gladiator | Front | DIESEL | Sport |
- Raises Front 1.75 (in) -6 (mm) Offset Aftermarket Wheels Recommended Use Up To 35 (in) x 12.50 (in) Tires For 37 (in) Tires Use Bump Stop Spacer Kit ; Lift heights based around a typical Jeep build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher if installed on a stock weighted vehicle.
- Beyond the added ground clearance, the dual rate design of ICON springs provides a softer initial rate for superb on-road comfort and a firmer secondary rate that delivers excellent bottoming resistance and superior off-road performance.
- 18-23 JL 2.5"/20-23 JT 2" FRONT DUAL RATE SPRING KIT
- Product Attributes:
- AAP_UDA_12: Ea
- AAP_UDA_22: 1
- Recommended Aftermarket Tires: 35" X 12.50" (37" X 12.50" With Optional Extended Bump Stop Spacer Kit Pn: 22029)
- Recommended Aftermarket Wheels:
- (non-rubicon) Icon Alloys - 17x8.5 W/ 4.5" Backspace / -6mm Offset
- (non-rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (non-rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 17x8.5 W/ 4.75" Backspace / 0mm Offset
- (rubicon) Icon Alloys - 18x9 W/ 4.5" Backspace / -12mm Offset
- (rubicon) Icon Alloys - 20x9 W/ 4.5" Backspace / -12mm Offset
- Grade Type: Performance
- Front Spring Rate Type: Variable
- Finish: Powdercoated
- California Prop 65 Warning: Yes
- AAP_UDA_4: 55
- Rear Spring Seat Included: No
- Maximum Lift Height: 2.5
- Bump Stops Included: Yes
- Front Spring Seat Included: No
- Spring Material: Steel
- OEM Wheels & Tires Fitment: Yes
-
Features:
- 2.5" front lift height on Wrangler/2" front lift on Gladiator
- Fits 35" tires (37" with optional bump stop spacer kit PN: 22029)
- 3" front increase in wheel travel (when paired with ICON shocks)
- Improves on and off-road ride quality over stock
- Dual rate coil springs with lifetime guarantee against sagging/breakage
- 100% bolt-on system makes for an easy install
- “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability
- The ICON Vehicle Dynamics 2018-2023 Jeep Wrangler JL/2020-2023 Jeep Gladiator front coil springs are designed for drivers demanding the ultimate in performance and ride quality, while allowing for increased wheel travel (when used with ICON shocks) and the fitment of larger tires. The ICON coil springs provide 2.5" of lift height on Wrangler JL (based on a factory equipped 4-door Rubicon) or 2" of front lift on Gladiator JT and feature a dual rate design. The dual rate design allows for a softer initial rate for superb on road comfort and a firmer secondary rate that increases during compression for excellent bottoming resistance and off-road performance. Like all ICON coil springs, they feature a lifetime guarantee against sagging/breakage to produce confidence in knowing that you have the best suspension products available for the 2018-2023 Jeep JL Wrangler or 2020-2023 Jeep Gladiator.
Additional Fitment Information:
| Vehicle | Position | Fuel Type | Sub Model |
|---|---|---|---|
| 2022 - Jeep Gladiator | Front | DIESEL | Altitude |
Showing 1 - 10 of 12 products
Loading...