Shop By Product Matching "K&N"
Image
Product
Price
- Standard SFI; Internal Balance; 168 Tooth; 10.75 in. and 11.5 in. Bolt Circle
- Automatic Transmission Flexplate; Standard SFI; Internal Balance; 168 Tooth; 10.75 in. and 11.5 in. Bolt Circle;
- Automatic Transmission Flexplate
- Product Attributes:
- NHRA Accepted: Yes
- WARNING CA Proposition 65: No
- IHRA Legal: Yes
- SFI Certification Sticker: Included
- Timing Marks: 168
- SFI Approved: Yes
- Crankshaft Bolt Hole Quantity: 6
- Dual Pattern: No
- Item Weight: 7.000 Lbs.
- Balance: Internal
-
Features:
- NHRA/IHRA Legal For All Classes
- Includes SFI Certification Sticker
- Ideal For Street Applications
- To Extreme Duty Racing
- To High RPM Use
- As performance levels increase, an O.E. style flexplate just wont cut it and a stronger option is a necessity to prevent transmission and/or converter failure. B&M has you covered with our high performance SFI approved flexplate designed for 1955-1985 GM small block (internally balanced) V8 engines along with 4.3L V6 engines. Also fits 1965-up GM big block (internally balanced) V8 engines with two piece rear main seal. Features include high tensile strength steel construction to resist elongation and cracking, dual bolt pattern 10.75 or 11.5 inch converter mounting locations, 168 tooth ring gear with double-sided welds for added strength and comes with SFI 29.1 safety certification insuring the ultimate in safety and performance. The assembly is then Zinc plated and treated with a Chromate Conversion Coating for added corrosion resistance and durability. B&M SFI approved flexplates are ideal for extreme duty race applications as well as street cars, tow vehicles or other vehicles needing the added protection and toughness that B&M has been delivering since 1953.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Transmission Manuf. Code | CID |
|---|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | 6 Cyl 3.8L | Powerglide | 230 |
- W/55 5/8" Belt O.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1418
- 55.82
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1397
- 55
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00023791, 0117400, 0221599590, 02235177, 0224779, 0274837, 03-02-097-5, 03-02-551-9, 0403548, 0406944, 10-01957, 10-02013, 10017221, 10548, 10550, 10555, 10A1395, 10AX1400...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | Fan and Air Conditioning | GAS | 6 Cyl 3.8L | 230 |
- W/54 1/4" Belt O.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1380
- 54.33
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1359
- 53.51
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0070183, 0400222, 10-01650, 10A1360, 10A1363, 11381, 11502118, 11502248, 1162338, 1164197, 1165501, 1188358, 11A1360, 11G1360, 120M, 13-535, 13-537, 13535...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | Fan and Air Conditioning | GAS | 6 Cyl 3.8L | 230 |
- W/Single Belt
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1011
- 39.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 39
- 991
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009840100, 0023245089, 0023255089, 0069970692, 0069972692, 0069973092, 0079972092, 0099970292, 0099975292, 0119300, 0119794, 02018183810, 024918381B, 035145271G, 0403394, 0403397, 05641010300, 069708748...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | Fan and Alternator | GAS | 6 Cyl 3.8L | 230 |
- W/Dual Belts
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1011
- 39.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 39
- 991
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | Fan and Alternator | GAS | 6 Cyl 3.8L | 230 |
- Oil Filter
- H-3.5 in.; OD-3.75 in.; 13/16 In. - 16 UNS; w/o psi Relief Valve Pro-Series Oil Filter w/o Wrench Off Nut
- K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
- High Flow Oil Filter
- Product Attributes:
- WARNING CA Proposition 65: No
- Bypass Valve: No
- Item Weight: 1.000 Lbs. (0.4 Kg)
- Product Box Height: 3.700 In. (94mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Nitrile Rubber
- Product Box Width: 3.900 In. (99 Mm)
- Package Material: Paperboard
- Product Box Length: 3.900 In. (99mm)
- PSI Relief Valve: No
- Removal Nut: No
- Item Height: 3.500 In. (89mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- Designed To Improve Performance
- Designed For Synthetic/Conventional/Blended Oils
- Premium Filtration Media For Increased Capacity
- Helps Improve Engine Performance by Reducing Oil Restriction
- K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.
This Part Fits the Following OEM/Substitute Numbers:
51069, DG30, FL10, FL269, FL774, HP2002, HP8, L20049, M1202, PF25, PH30
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | 6 Cyl 3.8L | 230 |
- Replacement Air Filter
- Round; H-2 in.; ID-8 in.; OD-10 in.; Replacement
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 1.400 Lbs. (0.6 Kg)
- Machine Washable: Yes
- Product Box Height: 10.310 In. (262mm)
- Filter Material: Cotton Gauze
- Inside Diameter: 8.000 In. (203mm)
- Product Box Width: 3.940 In. (100 Mm)
- Product Box Length: 10.190 In. (259mm)
- Item Height: 2.000 In. (51mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: None
- Top Style: Open
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Inner Wire: No
- Top Material: None
- Flange Angle: 0 Degree
- Shape: Round
- Package Material: Paperboard
- Filter Re-Oiling Amount: 0.77 Oz (23 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | 6 Cyl 3.8L | 230 |
- Replacement Air Filter
- Round; H-2 in.; ID-8 in.; OD-10 in.; Replacement w/Standard Filter
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 1.400 Lbs. (0.6 Kg)
- Machine Washable: Yes
- Product Box Height: 10.310 In. (262mm)
- Filter Material: Cotton Gauze
- Inside Diameter: 8.000 In. (203mm)
- Product Box Width: 3.940 In. (100 Mm)
- Product Box Length: 10.190 In. (259mm)
- Item Height: 2.000 In. (51mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: None
- Top Style: Open
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Inner Wire: No
- Top Material: None
- Flange Angle: 0 Degree
- Shape: Round
- Package Material: Paperboard
- Filter Re-Oiling Amount: 0.77 Oz (23 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
This Part Fits the Following OEM/Substitute Numbers:
42083, 5648139, 87083, A169CW, A30059, AF132, AF144, C2846, CA189, FA7R, LX203, P606069, PA59, PA658, SA189, TA30059
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | 6 Cyl 3.8L | 230 |
- Replacement Air Filter
- Round; H-3.5 in.; ID-8 in.; OD-10 in.; Replacement Heavy Duty Filter
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Item Weight: 1.500 Lbs. (0.7 Kg)
- Machine Washable: Yes
- Product Box Height: 10.310 In. (262mm)
- Filter Material: Cotton Gauze
- Inside Diameter: 8.000 In. (203mm)
- Product Box Width: 3.940 In. (100 Mm)
- Product Box Length: 10.190 In. (259mm)
- Item Height: 3.500 In. (89mm)
- Prop 65 (C, R or CR): Cr
- Number of Flanges: None
- Top Style: Open
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Inner Wire: No
- Top Material: None
- Flange Angle: 0 Degree
- Shape: Round
- Package Material: Paperboard
- Filter Re-Oiling Amount: 1.49 Oz (44 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Air Filter Element Material: Cotton Gauze
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
This Part Fits the Following OEM/Substitute Numbers:
2088, 42088, 42098, 6419892, 6420934, 7701070525, 8200861226, 87088, 87088MP, A178CW, A30067, AF178, AF67, AF77, C26721, CA192, DA178, DW87088...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | 6 Cyl 3.8L | 230 |
- FRAM, PH5, Oil Filter
- With anti-drain back valve Spin-on Oil Filter
- Extra Guard
- Product Attributes:
- Reusable: No
- Grade Type: Regular
- Replacable Filter: Yes
- Gasket Inside Diameter: 3.140
- Non Slip Grip: Yes
- Gasket Thickness: 0.250
- Torque Nut: No
- Attachment Type: Spin-on
- Burst Pressure: 230.000
- Gasket Type: Base
- Housing Color: Orange
- Inside Thread Diameter: 13/16-16
- Grade: Advanced
- Gasket Outside Diameter: 3.563
- Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
- Bypass Relief Valve: No
- Filter Media Material: Cellulose/synthetic Blend
- Anti-Drain Back Valve: Yes
-
Features:
- Proven protection for up to 10,000 miles (16,000 kilometers)
- Engineered for use with synthetic or conventional motor oils
- SureGrip® technology for easy install and removal
- Filter media is a blend of fiber and resin that captures 95% of the dirt particles
- Silicone anti-drain back valve helps ensure safe engine start up
- FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).
This Part Fits the Following OEM/Substitute Numbers:
05579680, 05715388, 1-13, 102, 1025280-M91, 104, 1060, 1061, 1146873-3, 13, 132, 1350-5061, 14957, 162, 17-1729-4, 173233, 18-7876, 19210338...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1964 - GMC I1000 | L | 3769 | 6 Cyl 3.8L | 230 |
Showing 1 - 10 of 12 products
Loading...