Shop By Product Matching "K&N"

Showing 1 - 7 of 7 products
Image
SKU
Product
Rating
Price

Gates
  • High Capacity V-Belt (Standard)
  • Product Attributes:
    • Top Width: .41
    • Belt Material: Epdm
    • Notched: Yes
    • Outside Circumference:
      • 1189
      • 46.82
    • Construction: Notched
    • Cross Section Designation: Hc41
    • Effective Length:
      • 1168
      • 46
    • Strand Quantity: 1
    • Type: High Capacity V-belt (standard)
    • Cord Material: Polyester
  • Features:
    • Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
    • Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
    • Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
    • Resists oil, heat, ozone, weather and aging for improved belt life
    • Meets or exceeds SAE J636C specifications
  • Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
  • Suggested Purchase Quantity: 3
    • Most jobs typically require 3 of this item.

This Part Fits the Following OEM/Substitute Numbers:
0009972292, 0009972892, 0049971192, 0059977392, 0117300, 0221200, 0238994, 0241002, 026713, 027011252, 03-02-259-5, 03937789, 070903137, 10-01973, 10009102, 10009106, 1007, 1056470M1...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Fuel Type Engine CID
1966 - Ford P-100 L 2786 Fan and Air Pump GAS 6 Cyl 2.8L 170

Wix
  • WIX Spin-On Lube Filter
  • Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 3.661
    • Duty Type: Ld
    • Micron: 21.00
    • Flow Rate: 7-9 Gpm
    • Class: A
    • Outlet: 0.00
    • Burst Pressure: 290
    • BetaRatio: 2/20=6/20
    • Bypass Relief Valve Setting: 8-11
    • Media Material: Enhanced Cellulose
    • Anti-Drain Back Valve: Yes
    • Inlet: 0.00
  • Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.

This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
1966 - Ford P-100 L 2786 United States 6 Cyl 2.8L 170

K&N
  • Oil Filter
  • H-5.7 in.; OD-3.65 in.; 3/4 In. - 16UNF-2B Thread; psi Relief Valve 8-11 Pro-Series Oil Filter w/o Wrench Off Nut
  • K/N Performance Silver Oil Filters have been specially designed for professional installers. Their high flow design can help to improve engine performance by reducing oil filter restriction while they provide outstanding filtration.
  • High Flow Oil Filter
  • Product Attributes:
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Item Weight: 1.300 Lbs. (0.6 Kg)
    • Product Box Height: 5.700 In. (145mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Nitrile Rubber
    • Product Box Width: 3.810 In. (97 Mm)
    • Package Material: Paperboard
    • Product Box Length: 3.810 In. (97mm)
    • PSI Relief Valve: 8-11
    • Removal Nut: No
    • Item Height: 5.719 In. (145mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • Designed To Improve Performance
    • Designed For Synthetic/Conventional/Blended Oils
    • Premium Filtration Media For Increased Capacity
    • Helps Improve Engine Performance by Reducing Oil Restriction
  • K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.

This Part Fits the Following OEM/Substitute Numbers:
122P193, 41515, 51515, 51525, 51545, 51622, 51775, AFL1, FL1A, FL1HP, FL281, HD222, HP1, HP3001, L30001, L30119, L30257, L30341...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1966 - Ford P-100 L 2786 6 Cyl 2.8L 170

K&N
  • Oil Filter
  • H-5.719 in.; OD-3.656 in.; 3/4 In.-16UNF-2B Thread; psi Relief Valve 8-11 Premium Oil Filter w/Wrench Off Nut~Excludes 1 Quart Cartridge Type
  • K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
  • Performance Gold Oil Filter
  • Product Attributes:
    • Removal Nut Size: 1.000 In.
    • WARNING CA Proposition 65: No
    • Bypass Valve: Yes
    • Item Weight: 1.300 Lbs. (0.6 Kg)
    • Product Box Height: 6.130 In. (156mm)
    • Filter Material: High Flow Premium Media
    • Gasket Material: Viton Rubber
    • Product Box Width: 3.880 In. (98mm)
    • Package Material: Paperboard
    • Product Box Length: 3.880 In. (98mm)
    • PSI Relief Valve: 8-11
    • Removal Nut: Yes
    • Item Height: 5.719 In. (145mm)
    • Package Type: Box
    • Anti-Drain Back Valve: Yes
  • Features:
    • OE Replacement Oil Filter
    • 1 in. Exposed Nut Designed For Easy Oil Filter Removal
    • Heavy Duty Construction For Extreme Conditions
    • Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
  • K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.

This Part Fits the Following OEM/Substitute Numbers:
005557147R91, 028115561B, 068115561B, 068115561E, 105548, 1220193, 122P193, 1328691, 1520865002, 1520865011, 15208W1120, 15208W1123, 15208W3401, 1540232091, 1560041010, 156007600371, 156017800171, 156017810171...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1966 - Ford P-100 L 2786 6 Cyl 2.8L 170

K&N
  • Replacement Air Filter
  • Round; H-2.25 in.; ID-8 in.; OD-10 in.; Replacement
  • K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
  • Air Filter
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • WARNING CA Proposition 65: Yes
    • Item Weight: 1.400 Lbs. (0.6 Kg)
    • Machine Washable: Yes
    • Product Box Height: 10.310 In. (262mm)
    • Filter Material: Cotton Gauze
    • Inside Diameter: 8.000 In. (203mm)
    • Product Box Width: 3.940 In. (100 Mm)
    • Product Box Length: 10.190 In. (259mm)
    • Item Height: 2.250 In. (57mm)
    • Prop 65 (C, R or CR): Cr
    • Number of Flanges: None
    • Top Style: Open
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Inner Wire: No
    • Top Material: None
    • Flange Angle: 0 Degree
    • Shape: Round
    • Package Material: Paperboard
    • Filter Re-Oiling Amount: 0.9 Oz (27 Ml)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Air Filter Element Material: Cotton Gauze
    • Cap Outside Diameter: N/a
    • Filter Style: Dry
    • Package Type: Box
  • Features:
    • Designed To Boost Horsepower And Acceleration
    • Washable And Reusable
    • High Air Flow With Exceptional Filtration
    • Lasts Up To 50000 Miles Before Cleaning
    • Works With Original Equip. Mfg. Vehicle Electronics
    • Will Not Void Vehicle Warranty
    • Million Mile Limited Warranty
  • K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

Additional Fitment Information:
Vehicle
1966 - Ford P-100

K&N
  • Replacement Air Filter
  • Round; H-2.25 in.; ID-8 in.; OD-10 in.; Replacement
  • K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
  • Air Filter
  • Product Attributes:
    • Oil Included: Filter Is Pre-oiled
    • WARNING CA Proposition 65: Yes
    • Item Weight: 1.400 Lbs. (0.6 Kg)
    • Machine Washable: Yes
    • Product Box Height: 10.310 In. (262mm)
    • Filter Material: Cotton Gauze
    • Inside Diameter: 8.000 In. (203mm)
    • Product Box Width: 3.940 In. (100 Mm)
    • Product Box Length: 10.190 In. (259mm)
    • Item Height: 2.250 In. (57mm)
    • Prop 65 (C, R or CR): Cr
    • Number of Flanges: None
    • Top Style: Open
    • Pre-Screened: No
    • Automotive Item Grade: High Performance
    • Inner Wire: No
    • Top Material: None
    • Flange Angle: 0 Degree
    • Shape: Round
    • Package Material: Paperboard
    • Filter Re-Oiling Amount: 0.9 Oz (27 Ml)
    • Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
    • Air Filter Element Material: Cotton Gauze
    • Cap Outside Diameter: N/a
    • Filter Style: Dry
    • Package Type: Box
  • Features:
    • Designed To Boost Horsepower And Acceleration
    • Washable And Reusable
    • High Air Flow With Exceptional Filtration
    • Lasts Up To 50000 Miles Before Cleaning
    • Works With Original Equip. Mfg. Vehicle Electronics
    • Will Not Void Vehicle Warranty
    • Million Mile Limited Warranty
  • K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!

This Part Fits the Following OEM/Substitute Numbers:
2054, 42054, 87054, 8991386, A117C, A30045, A55, AF184, AF41, C2749, CA184, FA1R, HPR0184, PA642, SA184, TA30045

Additional Fitment Information:
Vehicle
1966 - Ford P-100

Fram
  • FRAM, PH8A, Oil Filter
  • Spin-on Oil Filter
  • Extra Guard
  • Product Attributes:
    • Reusable: No
    • Grade Type: Regular
    • Replacable Filter: Yes
    • Gasket Inside Diameter: 2.422
    • Non Slip Grip: Yes
    • Gasket Thickness: 0.203
    • Torque Nut: No
    • Attachment Type: Spin-on
    • Burst Pressure: 230.000
    • Gasket Type: Base
    • Housing Color: Orange
    • Inside Thread Diameter: 3/4-16
    • Bypass Relief Valve Setting: 12.000
    • Grade: Advanced
    • Gasket Outside Diameter: 2.797
    • Meets Or Exceeds Original Equipment Manufacturer Specifications: Yes
    • Bypass Relief Valve: Yes
    • Filter Media Material: Cellulose/synthetic Blend
    • Anti-Drain Back Valve: Yes
  • Features:
    • Silicone anti-drain back valve helps ensure safe engine start up
    • SureGrip® technology for easy install and removal
    • Filter media is a blend of fiber and resin that captures 95% of the dirt particles
    • Proven protection for up to 10,000 miles (16,000 kilometers)
    • Engineered for use with synthetic or conventional motor oils
  • FRAM Extra Guard® oil filters deliver advanced engine protection for everyday drivers who perform routine oil changes at OE (original equipment) recommended intervals. Equipped with SureGrip® technology, FRAM Extra Guard® oil filters provide a non-slip surface allowing for easy install and removal. The silicone anti-drain back valve ensures safe engine startups, extending the life of the oil filter for up to 10,000 miles (16,000 kilometers).

This Part Fits the Following OEM/Substitute Numbers:
000-983-0607, 00120-00001, 00120-00012, 02-7088230, 041-0745, 041-8159, 041-8756, 1-5360, 1-829195, 1-8A, 10-00041, 10-00074, 10-00132, 10-00280, 10-00314, 10-00520, 10-00967, 10-50132...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Engine CID
1966 - Ford P-100 L 2786 6 Cyl 2.8L 170
Showing 1 - 7 of 7 products

Loading...