Shop By Product Matching "KP"
Choose your Submodel for your 2008 Toyota Tacoma
Image
Product
Price
- Atlas Roll Bar Kit
- Black Steel W/ Set of 9" Black Round LED Light
-
Features:
- Atlas Roll Bar Kit ATRB6BK-PL69B by Black Horse Off Road - Patent Approved - compatible with 2005-2024 Toyota Tacoma
- Comes with Set of 9" Inch Black round LED Lights
- This Atlas Roll Bar is made from Black powder-coated 3 Inch steel round tubes along with the original Cargo Basket that adds structural strength to your truck and protect you and your passengers in the event of a roll over.
- Raised Base to Accommodate Tonneau Cover
- Carries up to 150 lbs of cargo / Includes Third Brake Light Built in with Wiring
- Fabricated with OEM-grade precision and materials that meet or exceed the highest quality standards.
- The patented designs and attention to detail, ensures a long lasting and trouble-free service life.
- Auxiliary headlights can be mounted above the cab roofline and add heavy duty tie-down points along with the rugged styling to complement the off-road functionality and recreational activities
- Comes in 2 boxes and require assembly upon installation / Installation Instructions and Mounting Hardware are Included
- Drilling on side tail lips of truck bed is required for installation
- Black Horse Off Road Atlas Roll Bar Kit Black Steel W/ Set of 9" Black Round LED Light compatible with TONNEAU COVER
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2008 - Toyota Tacoma | TRD Sport Prerunner |
- Performance Air Intake System
- Polished; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 10.17 HP At 5174 RPM;Not Legal For Sale Or Use In California
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.000 In. (152mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 10.17 Hp @ 5174 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Rf-1048
- Item Weight: 11.200 Lbs. (5.1 Kg)
- RPM: 5174
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 10 Hp
- Intake Pipe Inlet Length: 23.000 In. (584mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.000 In. (76mm)
- Intake Pipe Outlet Length: 23.000 In. (584mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
- Intake Pipe Outlet Width: 3.000 In. (76mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Toyota Tacoma | V | 3956 | 6 Cyl 4.0L | X-Runner | 241 |
- Performance Air Intake System
- Polished; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 5.71 HP At 4600 RPM;Not Legal For Sale Or Use In California
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 5.71 Hp @ 4600 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1042
- Item Weight: 11.900 Lbs. (5.4 Kg)
- RPM: 4600
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 6 Hp
- Intake Pipe Inlet Length: 26.250 In. (667mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 2.750 In. (70mm)
- Intake Pipe Outlet Length: 26.250 In. (667mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Street Legal: No
- Intake Pipe Outlet Width: 2.750 In. (70mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2008 - Toyota Tacoma | L | 2694 | 4 Cyl 2.7L | Pre Runner | - |
- Universal Joint
- with 2 Piece Rear Drive Shaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter 2 Piece Driveshaft Greaseable
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2008 - Toyota Tacoma | V | 3956 | Automatic | Front Driveshaft at Transfer Case | 6 Cyl 4.0L | 4WD | 241 |
- Universal Joint
- with 2 Piece Rear Drive Shaft with 3.219in Outside Snap Ring Dimension 1.062in Bearing Cap Diameter 2 Piece Driveshaft Greaseable
- HGVF
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Lube Fitting In Bearing
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-0153G, 1-0154, 1-0200, 1-0278, 15-153X, 2-0785, 269, 280, 329, 369, 379, 380, 45U0107, 45U0111, 45U0121, 45U0145, 45U0150...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2008 - Toyota Tacoma | V | 3956 | Automatic | Front Driveshaft at Front Axle | 6 Cyl 4.0L | 4WD | 241 |
- 2 Piece Driveshaft Greaseable 1.062in Bearing Cap Diameter with 2 Piece Rear Drive Shaft with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2008 - Toyota Tacoma | V | 3956 | Automatic | Front Driveshaft at Front Axle | 6 Cyl 4.0L | 4WD | 241 |
- 2 Piece Driveshaft Greaseable 1.062in Bearing Cap Diameter with 2 Piece Rear Drive Shaft with 3.219in Outside Snap Ring Dimension
- HGVF
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Finish: Ground
- Bearing Cap Type A: Osr
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Greaseable: Y
- Bearing Cap Diameter (2): 1.062
- Bearing Cap Diameter (1): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310/spl22
- Bearing Cap Diameter B (mm): 1.062
- Snap Ring Included: Y
- Grease Fitting Location: One Lube Fitting In Bearing
- Snap Ring Type: External
- Length A (mm): 81.8
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Bearing Cap Diameter A (mm): 1.062
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|---|
| 2008 - Toyota Tacoma | V | 3956 | Automatic | Front Driveshaft at Transfer Case | 6 Cyl 4.0L | 4WD | 241 |
Showing 1 - 7 of 7 products
Loading...