Image
Product
Price
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 9.91 HP At 5343 RPM;CARB E.O. D-269-49 77 Series - Metal Intake Kit For Truck or SUV; Polished
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 9.91 Hp @ 5342 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1042
- Item Weight: 11.300 Lbs. (5.1 Kg)
- RPM: 5342
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 10 Hp
- Intake Pipe Inlet Length: 24.500 In. (622mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 24.500 In. (622mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5328 | 8 Cyl 5.3L | XFE | 325 |
- Performance Air Intake System
- Polished; Includes Air Filter/Tubing/Heat Shield; Estimated Horsepower Gain 9.91 HP At 5343 RPM;CARB E.O. D-269-49
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Performance Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Air Filter Height: 6.500 In. (165mm)
- Clamp Style: Regular
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 9.91 Hp @ 5342 Rpm
- TUV Approved (Europe): No
- Intake Pipe Inlet Shape: Round
- Replacement Filter: Ru-1042
- Item Weight: 11.300 Lbs. (5.1 Kg)
- RPM: 5342
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- Air Filter Outlet Length: 6.000 In. (152mm)
- Clamp Quantity: 5
- Air Filter Large End Diameter: 7.500 In. (191mm)
- Intake Pipe Outlet Shape: Round
- Intake Pipe Color: Polished
- Clamp Color: Natural
- Clamp Material: Stainless Steel
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Air Filter Outlet Width: 6.000 In. (152mm)
- Horse Power Increase: 10 Hp
- Intake Pipe Inlet Length: 24.500 In. (622mm)
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Paperboard
- Intake Pipe Inlet Width: 3.500 In. (89mm)
- Intake Pipe Outlet Length: 24.500 In. (622mm)
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Alternate Replacement Filter: Rf-1042
- Package Type: Box
- Air Box Included: No
- Street Legal: Yes
- Intake Pipe Outlet Width: 3.500 In. (89mm)
-
Features:
- Guarantee To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Replaces Entire Factory Air Intake System
- Lasts Up To 100000 Miles Before Service Is Required
- Easy To Install Usually In 90 Minutes or Less
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2012 - GMC Sierra 1500 | V | 5328 | 8 Cyl 5.3L | XFE | 325 |
- Front Rear Semi-Metallic Brake Pads Kit For Chevrolet GMC Sierra 1500 Silverado
- Positive Plus Front Rear Semi-Metallic Brake Pads Kit For Chevrolet GMC Sierra 1500 Silverado Avalanche Tahoe Cadillac Yukon Suburban XL Escalade EXT ESV KPF-100137
- Positive Plus
- Product Attributes:
- WebNameEbay4: For Chevrolet Gmc Sierra 1500 Silverado Front Rear Semi-metallic Brake Pads Kit
- ComponentsSummaryRegularWithBrands: 2x Positive Plus Brake Pad Set
- ComponentsSummaryShort: 2x Brake Pad
- ComponentsSummaryLongWithBrands: 1x Front Semi-metallic Positive Plus Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Positive Plus Brake Pad Set (hardware Included)
- WebNamePlain: Positive Plus Front Rear Semi-metallic Brake Pads Kit Kpf-100137
- ComponentsSummaryShortWithBrands: 2x Positive Plus Brake Pad
- NumberOfPieces: 2
- ComponentsSummaryLong: 1x Front Semi-metallic Brake Pad Set (hardware Included) + 1x Rear Semi-metallic Brake Pad Set (hardware Included)
- WebNameLong: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Chevrolet Gmc Sierra 1500 Silverado Avalanche Tahoe Cadillac Yukon Suburban Xl Escalade Ext Esv Kpf-100137
- WebNameShort: Front Rear Semi-metallic Brake Pads Kit For Chevrolet Gmc Sierra 1500 Silverado Avalanche Kpf-100137
- ComponentsSummaryRegular: 2x Brake Pad Set
- WebNameRegular: Positive Plus Front Rear Semi-metallic Brake Pads Kit For Chevrolet Gmc Sierra 1500 Silverado Avalanche Tahoe Cadillac Yukon Suburban Xl Escalade Ext Esv Kpf-100137
- WebNameEbay2: [front+rear] Semi-metallic Brake Pad Kit For Chevrolet Gmc Sierra 1500 Silverado
- WebNameEbay3: Semi-metallic Brake Pads Front Rear Kit For Chevrolet Gmc Sierra 1500 Silverado
- WebNameEbay: Front Rear Semi-metallic Brake Pads Kit For Chevrolet Gmc Sierra 1500 Silverado
-
Features:
- Exclusive PowerGrip™ Semi-Metallic formula provides unmatched braking power (powerful friction, extreme temperature tolerance, aggressive initial bite) while maintaining low dust and noise
- Fiber-Reinforced Multi-Layer Shim with a rubber core minimize noise, vibration, and harshness for complete quietness
- Engineered with High Carbon SteelRX™ alloy (Pressure Resistant, Thermal Conductive) and dipped in an Anti-Rust Black Paint to improve durability
- Precise laser-cut channel cut provides superior thermal stability and prevent overheating
- Scorched for almost no break-in process required, raised initial cold effectiveness, and enhanced Pad-to-Rotor contact
- Chamfered for mooth and gradual initial engagement on the rotor surface to prevent edge shifting
- One-Piece Integral Molding Technology improves the durability of the pads and extends the service life
- Premium Stainless-Steel hardware included (when required by the application)
- Kit Includes: 1x Front Semi-Metallic Brake Pad Set (Hardware Included) + 1x Rear Semi-Metallic Brake Pad Set (Hardware Included)
- Part Reference Numbers : 8803 8472 SG8472X PF8472X AD8472 FT8472 QE8472X SS8472X D1363 1363 8312 SG8312X PF8312X AD8312 FT8312 QE8312X SS8312X D1194 1194
- PPF offers the utilmate semi-metallic brake pads on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by PPF certified engineers.
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
1194, 1363, 8312, 8472, 8803, AD8312, AD8472, D1194, D1363, FT8312, FT8472, PF8312X, PF8472X, QE8312X, QE8472X, SS8312X, SS8472X, xPPF-D1194...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2012 - GMC Sierra 1500 | Front and Rear |
- Warrior Roll Bar Kit
- Black Steel Box1-roof basket: dimensions: 52.95 X 50.39 X 8.85inch Gross Weight : 65.69 pounds W/ Set of 9" Black Round LED Light
-
Features:
- Warrior Roll Bar Kit WRB-001BK-PL69B by Black Horse Off Road - Patent Approved
- 3 - year manufacturer's limited warranty / Will not fit if hard or soft tonneau covers installed
- This Warrior Roll Bar is made from Black powder coat finish high-grade materials to adds structural strength to your truck and protect you and your passengers in the event of a roll over
- Free Shipping / Designed to carry loads up to 400 lbs.
- Extends along bed rail for extra tie-down points
- 3 inch diameter Mild Steel Cold-Rolled Tubing
- Rust resistant powder-coated top-coat with an E-coat undercoat / Bolt-on, no drill installation
- Comes with Set of 9" Inch Black round LED Lights
- Light brackets designed to hold lights up to 50" in length (LED Bar) / Includes rear brake light
- Quick release mechanism to remove and install basket / Includes step-by-step installation instructions and mounting hardware
- Black Horse Off Road Warrior Roll Bar Kit Black Steel Box1-roof basket: dimensions: 52.95 X 50.39 X 8.85inch Gross Weight : 65.69 pounds W/ Set of 9" Black Round LED Light Needs Slight modification for Trucks equipped with Factory Rail System
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - GMC Sierra 1500 | XFE |
- Warrior Roll Bar Kit
- Black Steel Box1-roof basket: dimensions: 52.95 X 50.39 X 8.85inch Gross Weight : 65.69 pounds Includes 2 pairs of 7.0"Diameter LED Lights with Black Trim Rings with Wiring Harness and Switch
-
Features:
- Warrior Roll Bar Kit WRB-001BK-PLB by Black Horse Off Road - Patent Approved
- This Warrior Roll Bar is made from Black powder coat finish high-grade materials to adds structural strength to your truck and protect you and your passengers in the event of a roll over
- Free Shipping / Designed to carry loads up to 400 lbs.
- Extends along bed rail for extra tie-down points
- Rust resistant powder-coated top-coat with an E-coat undercoat / Bolt-on, no drill installation
- Light brackets designed to hold lights up to 50" in length (LED Bar) / Includes rear brake light
- Quick release mechanism to remove and install basket / Includes step-by-step installation instructions and mounting hardware
- 3 - year manufacturer's limited warranty / Will not fit if hard or soft tonneau covers installed
- Includes 4x 7 Round Auxiliary LED Lights and wiring harnesses and black trim ring
- Black Horse Off Road Warrior Roll Bar Kit Black Steel Box1-roof basket: dimensions: 52.95 X 50.39 X 8.85inch Gross Weight : 65.69 pounds Includes 2 pairs of 7.0"Diameter LED Lights with Black Trim Rings with Wiring Harness and Switch Needs Slight modification for Trucks equipped with Factory Rail System
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - GMC Sierra 1500 | XFE |
- Classic Roll Bar Kit
- Black Steel Includes 2 pairs of 7.0"Diameter LED Lights with Black Trim Rings with Wiring Harness and Switch
-
Features:
- Classic Roll Bar Kit RB001BK-PLB by Black Horse Off Road - Patent Approved
- This Classic Roll Bar is made from Black powder-coated 4 Inch steel round tubes
- Includes Third Brake Light Built in with Wiring
- Fabricated with OEM-grade precision and materials that meet or exceed the highest quality standards.
- The patented designs and attention to detail, ensures a long lasting and trouble-free service life.
- Auxiliary headlights can be mounted above the cab roofline and add heavy duty tie-down points along with the rugged styling to complement the off-road functionality and recreational activities
- Comes with Installation Instructions and Mounting Hardware
- Drilling on side tail lips of truck bed is required for installation
- Requires an additional Bracket for Tonneau Cover Compatibility
- Black Horse Off Road Classic Roll Bar Kit Black Steel Includes 2 pairs of 7.0"Diameter LED Lights with Black Trim Rings with Wiring Harness and Switch Not Compatible with Tonneau Cover
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - GMC Sierra 1500 | XFE |
- Universal Joint Greaseable 1350 Series
- Greaseable with 2 Piece Rear Drive Shaft 1.188in Bearing Cap Diameter 2 Piece Driveshaft with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.188
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.188
- 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm):
- 1.188
- 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2012 - GMC Sierra 1500 | Rear Driveshaft at Support Bearing | RWD |
- Universal Joint Greaseable 1350 Series
- with 3.625in Outside Snap Ring Dimension 1.188in Bearing Cap Diameter 2 Piece Driveshaft Greaseable with 2 Piece Rear Drive Shaft
- FSGR
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1350 (spl30)
- Snap Ring (2): 3.625
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.188
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.188
- 30.175
- Bearing Cap Type: Round
- Snap Ring (1): 3.625
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm):
- 1.188
- 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
00002422475, 01-0729-504, 02330781, 0270006410, 02706410, 04371-04080, 04371-0C080, 04371-0C081, 04371-0C082, 04371-0C090, 04371-0C093, 04371-0C094, 0437104080, 043710C080, 043710C081, 043710C082, 043710C090, 043710C093...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2012 - GMC Sierra 1500 | Rear Driveshaft at Transmission | RWD |
- Universal Joint Greaseable 1350 Series
- Greaseable with 1 Piece Rear Drive Shaft 1 Piece Driveshaft 1.188in Bearing Cap Diameter with 3.625in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1350 (spl30)
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.188
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.625
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.188
- 30.175
- Bearing Cap Type: Round
- Length B (mm): 92.1
- SR(2)Brng Cap to Brng Cap(OSR): 3.625
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.188
- OEM Mfg: Spicer
- OEM Series: 1350
- Bearing Cap Diameter B (mm):
- 1.188
- 30.175
- Seal Color/Finish: Blue
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 92.1
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2012 - GMC Sierra 1500 | Rear Driveshaft at Transmission | RWD |
- Over-Bed Gooseneck Installation Brackets; Select Silverado; Sierra 1500
- Includes Grade 8 Hardware; Installation Instructions; Drilling Req.; 20000lbs. Gross Trailer Weight Drilling Required
- CURT 61231 Over-Bed Gooseneck Installation Brackets; Fits Select Chevrolet Silverado; GMC Sierra 1500; Classic
- Gooseneck Hitch Folding Ball Install Kit
- Product Attributes:
- Capacity: 20000 Lbs.
-
Features:
- Mounts Any Curt Over-Bed Gooseneck Hitch On Specific Vehicles
- Vehicle-Specific Design Optimizes Strength And Installation Time
- Accepts Up To 20000 Lbs. Tw
- Constructed From High-Strength Laser-Cut Steel For A Precise Fit
- Protected By A Rust-Resistant Liquid Bonderite Coating
- Includes Grade 8 Mounting Hardware
- Made In USA
- Choosing the right gooseneck hitch is only half the battle in preparing your pickup truck for towing a gooseneck trailer. CURT gooseneck hitches are a premium option in the heavy-duty towing industry, but they are only one of the members in the heavyweight tag team that is CURT gooseneck towing. While a gooseneck hitch gets all the glory above the floor of your truck bed, gooseneck installation brackets provide sure footing and a solid foundation for that oversized gooseneck trailer. Gooseneck installation brackets work by bolting onto the frame of your truck, typically using pre-existing holes. With a set of brackets firmly bolted on, a gooseneck hitch is able to be attached and is given the strength it needs to manage the massive amount of weight of a gooseneck trailer. With so many gooseneck hitch options available from CURT, we wanted to make sure we offered the gooseneck installation products needed to give you a complete towing package. Our installation brackets fit multiple vehicles and hitch heads. This particular set of over-bed gooseneck installation brackets is designed to fit multiple CURT gooseneck hitches and provide a custom fit on certain years of the Chevrolet Silverado 1500 with new body style or GMC Sierra 1500 with new body style (see application info to verify fitment). It has a maximum weight capacity of 20,000 lbs., includes grade-8 mounting hardware for a complete installation and features laser-cut construction for a precise fit.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2012 - GMC Sierra 1500 | XFE |
Showing 1 - 10 of 27 products
Loading...