Shop By Product Matching "MG"
Choose your Engine for your 1978 Ford E-150 Econoline
Image
Product
Price
- Engine Piston Ring Set
- Premium Ring Groove Widths: 5/64in , 5/64in , 3/16in Moly Steel Top Ring Ductile 2nd Ring Standard
- Sealed Power E-251K Premium Piston Ring Set
- Product Attributes:
- Bore Size (mm): 101.60
- Radial Wall Thickness - Top (in): 0.145
- 2nd Ring Width (in): 5/64
- File Fit (Y/N): N
- Standard Size: Standard Size
- File Fit: No
- Top Ring Width (in): 5/64
- 2nd Ring Material: Grey Iron W/phosphate Coating
- Top Ring Face Design: Barrel Face
- Ring Set Groove Widths (in): 5/64 X 5/64 X 3/16
- Oil Ring Design: 3 Piece Flex Vent
- Top Ring Material:
- Steel W/moly
- Steel With Moly
- Oil Ring Width (in): 3/16
- Outside Diameter: 4.0000
- Bore Size (in): 4.0000
- 2nd Ring Face Design: Reverse Torsional
- Bore Diameter:
- 101.60
- 4.0000
- Top Ring Radial Wall Thickness: 0.145
- Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today's modern engines.
This Part Fits the Following OEM/Substitute Numbers:
1389176, 210-6114, 251K, 2M139, 3205941, 3549588, 3579044, 3780016, 3799438, 3839510, 3892364, 3893202, 40564, 40564CP, 474170, 6474170, 8271, E-251K...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1978 - Ford E-150 Econoline | V | 5753 | 8 Cyl 5.8L | 351 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Outlet: 0.00
- Burst Pressure: 290
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Inlet: 0.00
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 104 001, 0 451 104 003, 0 451 203 001-850, 0 451 203 005, 0 451 203 153, 0 986 452 001, 0 986 452 002, 0 986 AF0 124, 0 986 AF1 077, 00 012 280 22, 00 050 426 21, 00 052 212 72, 00 052 213 13, 00 061 604 48, 00 750 614 09, 00 750 614 11, 00 750 650 49, 00013505015...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1978 - Ford E-150 Econoline | L | 4917 | Canada | 6 Cyl 4.9L | 300 |
- Greaseable Super Strength Universal Joint
- with 3 Joint Driveshaft 1.063 (in) Bearing Caps Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 270 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.62
- 91.9
- Length A - Inch: 3.62
- OE Series: Spicer 1330
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.62
- Length B - mm: 91.9
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
215-0354, 45U0115
Additional Fitment Information:
| Vehicle | Trans Type | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1978 - Ford E-150 Econoline | Transmission | V | 5753 | Automatic | At Transmission | 8 Cyl 5.8L | 351 |
- Greaseable Super Strength Universal Joint
- with 3 Joint Driveshaft 1.063 (in) Bearing Caps Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 270 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.62
- 91.9
- Length A - Inch: 3.62
- OE Series: Spicer 1330
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.62
- Length B - mm: 91.9
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Trans Type | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1978 - Ford E-150 Econoline | Transmission | V | 5753 | Automatic | At Center Bearing | 8 Cyl 5.8L | 351 |
- Greaseable Premium Universal Joint
- with 3 Joint Driveshaft with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 369 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.218
- 81.7
- Length A - Inch: 3.62
- OE Series: Spicer 1310
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.218
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-0153, 1-1153, 10153, 114-3HD, 114-3HP, 114-513, 114-513R, 114-513X, 114-521HD, 153, 15617322, 20049, 20208, 20335, 210-0153, 212-0153, 215-0153, 26015249...VIEW MORE
Additional Fitment Information:
| Vehicle | Trans Type | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1978 - Ford E-150 Econoline | Transmission | V | 5753 | Automatic | At Rear Axle | 8 Cyl 5.8L | 351 |
- Greaseable Premium Universal Joint
- with 2 Joint Driveshaft with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 369 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.218
- 81.7
- Length A - Inch: 3.62
- OE Series: Spicer 1310
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.218
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Wheel FeedBase |
|---|---|---|
| 1978 - Ford E-150 Econoline | At Transmission | 138.0 |
- Greaseable Premium Universal Joint
- with 3 Joint Driveshaft Greasable Premium with Steel Driveshaft & Steel Driveshaft Yoke
- MOOG Greaseable Premium 354 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.62
- 91.9
- Length A - Inch: 3.62
- OE Series: Spicer 1330
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.62
- Length B - mm: 91.9
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Trans Type | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1978 - Ford E-150 Econoline | Transmission | V | 5753 | Automatic | At Center Bearing | 8 Cyl 5.8L | 351 |
- Greaseable Premium Universal Joint
- with 3 Joint Driveshaft Greasable Premium with Steel Driveshaft & Steel Driveshaft Yoke
- MOOG Greaseable Premium 354 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.62
- 91.9
- Length A - Inch: 3.62
- OE Series: Spicer 1330
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.62
- Length B - mm: 91.9
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- GREASABLE DESIGN -- Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
114-213, 114-530, 12473124, 12545626, 15576468, 15580369, 15582093, 2-4800, 20051, 20064, 20336, 20340, 210-0213, 213, 24800, 28213X, 28530X, 3W1Z-4635-AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Trans Type | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1978 - Ford E-150 Econoline | Transmission | V | 5753 | Automatic | At Transmission | 8 Cyl 5.8L | 351 |
- Greaseable Premium Universal Joint
- with 3 Joint Driveshaft with Lube Fitting in Body Premium with Lube Fitting in Body
- MOOG Greaseable Premium 369 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.62
- 91.9
- Length Axis 2:
- 3.218
- 81.7
- Length A - Inch: 3.62
- OE Series: Spicer 1310
- Length A - mm: 91.9
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.218
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Trans Type | Block | CC | Transmission | Position | Engine | CID |
|---|---|---|---|---|---|---|---|
| 1978 - Ford E-150 Econoline | Transmission | V | 5753 | Manual | At Center Bearing | 8 Cyl 5.8L | 351 |
- OE Pad Material is Semi-Metallic
- R-Line; Metallic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 6.210
- Outer Pad Height: 2.400
- Outer Pad Width: 7.200
- FMSI Number: D50-7013a
- Inner Pad Height: 2.300
- Inner Pad Overall Thickness: 0.535
- Friction Material Composition: Metallic
- Outer Pad Overall Thickness: 0.535
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0050.10, 0050.20, 0504, 050Z, 101.00500, 102.00500, 104.00500, 106.00500, 107.00500, 108.00500, 14-050-12, 16-050, 16-050-12, 17-050, 24-050-01, 24-050-02, 24-050-04, 25-050-01...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1978 - Ford E-150 Econoline | Front |
Showing 1 - 10 of 24 products
Loading...