Image
Product
Price
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 9-11 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 275
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 13-19
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 001 181, 0 451 103 089, 0 451 103 106, 0 451 103 224, 0 451 105 191, 0 986 452 006, 0 986 452 016, 0 986 452 916, 0000230370, 00013505381, 0324-14300, 041-8086, 0410571, 0410639, 0410724, 0410736, 0410738, 0410784...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1983 - Mitsubishi Mighty Max | L | 2555 | Canada | 4 Cyl 2.6L | 156 |
- Non-Greaseable Premium Universal Joint
- Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1983 - Mitsubishi Mighty Max | Front Driveshaft at Front Axle | 4WD |
- Non-Greaseable Premium Universal Joint
- Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-1557, 114-310, 11557, 1503, 20131, 20310, 220-0081, 281557, 45U0016, 5-1503X, DT1503, GUM-81, U1503
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1983 - Mitsubishi Mighty Max | L | 1997 | At Transmission | 4 Cyl 2.0L | RWD | 122 |
- Non-Greaseable Premium Universal Joint
- Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1983 - Mitsubishi Mighty Max | L | 1997 | At Rear Axle | 4 Cyl 2.0L | RWD | 122 |
- Non-Greaseable Premium Universal Joint
- Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1983 - Mitsubishi Mighty Max | Front Driveshaft at Transfer Case | 4WD |
- Non-Greaseable Premium Universal Joint
- Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Drive Type | CID |
|---|---|---|---|---|---|---|
| 1983 - Mitsubishi Mighty Max | L | 1997 | At Center Bearing | 4 Cyl 2.0L | RWD | 122 |
- Front And Rear Complete Kit W/O Shocks
- Q: For Extended Cab applications use Lowering Blocks #6202 (3"drop with 2°taper) or #6102 (2" block with 2° taper). Lowering Rate: F: 2.5" / R: 3.0"
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
- Product Attributes:
- Title: Belltech 436 Lowering Kits Front And Rear Complete Kit W/o Shocks 1983-1997 Mitsubishi Mighty Max 2.5 In. F/3 In. R Drop W/o Shocks
-
Features:
- Lower your Sport Truck or SUV right the first time. Belltech complete lowering kits include all the parts and pieces you need to achieve not only the look you WANT, but the alignment, and performance & safety you NEED
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
- Does not include shock absorbers
- Lower your Sport Truck or SUV right the first time. Belltech complete component lowering kits include all the parts and pieces you need to achieve not only the look you WANT, but the ride quality, performance & safety you NEED. Belltech engineers have reviewed the most popular setups for each Sport Truck or SUV in our application range and developed the Belltech Complete Kit Line to simplify your purchase. These complete lowering kits are your all in one box solution. Made up of a variety of combinations of our individual lowering components as well as all the grade 8 installation hardware and alignment pieces necessary to achieve the advertised lowering amount, choosing your kit has never been simpler.
Additional Fitment Information:
| Vehicle | Region | Sub Model | Drive Type |
|---|---|---|---|
| 1983 - Mitsubishi Mighty Max | United States | SPX | RWD |
- Front And Rear Complete Kit W/O Shocks
- Q: For Extended Cab applications use Lowering Blocks #6202 (3"drop with 2°taper) or #6102 (2" block with 2° taper). Lowering Rate: Lowering Rate: F: 2.5" / R: 3.0"
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
- Product Attributes:
- Title: Belltech 436 Lowering Kits Front And Rear Complete Kit W/o Shocks 1983-1997 Mitsubishi Mighty Max 2.5 In. F/3 In. R Drop W/o Shocks
-
Features:
- Lower your Sport Truck or SUV right the first time. Belltech complete lowering kits include all the parts and pieces you need to achieve not only the look you WANT, but the alignment, and performance & safety you NEED
- Made up of a variety of combinations of our individual lowering components as well as all the installation and alignment pieces necessary to achieve the listed lowering, choosing your kit has never been simpler.
- Does not include shock absorbers
- Lower your Sport Truck or SUV right the first time. Belltech complete component lowering kits include all the parts and pieces you need to achieve not only the look you WANT, but the ride quality, performance & safety you NEED. Belltech engineers have reviewed the most popular setups for each Sport Truck or SUV in our application range and developed the Belltech Complete Kit Line to simplify your purchase. These complete lowering kits are your all in one box solution. Made up of a variety of combinations of our individual lowering components as well as all the grade 8 installation hardware and alignment pieces necessary to achieve the advertised lowering amount, choosing your kit has never been simpler.
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Bed | Region | Engine | Bed Length | Sub Model | Body | Drive Type | CID |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1983 - Mitsubishi Mighty Max | L | 1997 | 2 | Fleetside | United States | 4 Cyl 2.0L | 72.0 | Base | Standard Cab Pickup | RWD | 122 |
Showing 1 - 8 of 8 products
Loading...