Image
Product
Price
- Key Vent Fuel Cap
- Vented Black Cap
- Key Vent
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 1078-290305, 11501, 12F3PL, 17251F9926, 17501D, 31734, 40900, 4764917AA, 5501, 55010, 5501A, 703-1685, 9MGC900, MGC900, P5501
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Suzuki Samurai | L | 1325 | 4 Cyl 1.3L | 81 |
- Locking Fuel Cap
- Vented Black Cap
- Locking
- Product Attributes:
- Vented: Yes
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10501, 10501D, 10504, 10504Y, 10507, 10591, 10591D, 1078-290207, 11504, 11504Y, 11507, 11591, 12F20L, 1H0201553, 307201551, 31778, 31780, 31783...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Suzuki Samurai | L | 1325 | 4 Cyl 1.3L | 81 |
- Push Vent Fuel Cap
- Vented Black Cap
- Push Vent
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-291433, 10819, 10819D, 11819, 12F1P, 31615, 31615D, 3527385, 3542094, 40819, 6819, 6819A, 703-1703, 9MGC819, F32Z9030A, F42Z9030A, F4DZ9030A, F5AZ9030B...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Suzuki Samurai | L | 1325 | 4 Cyl 1.3L | 81 |
- Fuel Cap
- Vented Black Cap
- Standard
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10285948, 1078-290309, 10817, 10819, 10830, 10830D, 10834, 10834Y, 10837, 10869, 11817, 11830, 11834, 11834Y, 11837, 12335028, 12F46, 15001538...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Suzuki Samurai | L | 1325 | 4 Cyl 1.3L | 81 |
- Keyed Alike Locking Fuel Cap
- Vented Black Cap Includes 1 cap, same key. Multiples available
- Keyed Alike
- Product Attributes:
- Freight Class: 85
- Shell Diameter (in): 2.938
- Fuel Cap Venting: Emission Control
- Tethercluded: No
- Locking: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
17591, 9MGC233KA, MGC233KA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Suzuki Samurai | L | 1325 | 4 Cyl 1.3L | 81 |
- Tethered Fuel Cap
- Vented Black Cap
- Tethered
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10817T, 10819T, 10834T, 10837T, 10868T, 10869T, 172511TG0F, 172514BA0B, 172519DC1C, 290409, 6817T, 703-1888, 9MGC817T, MGC817T
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1988 - Suzuki Samurai | L | 1325 | 4 Cyl 1.3L | 81 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 275
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 262, 0 986 452 003, 0 986 452 019, 0 986 452 027, 0 986 452 035, 0 986 452 038, 0 986 452 044, 0 986 AF0 055, 0 986 AF0 138, 0 986 AF0 207, 0 986 AF1 046, 0 986 AF1 073, 0 986 AF1 078, 0 986 AF1 129, 00013504996, 0060290915004, 0122-0645, 019005200039...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1988 - Suzuki Samurai | L | 1325 | Canada | 4 Cyl 1.3L | 81 |
- 26 Spline; 6 Bolts
- Mile Marker Supreme Manual Hub; 26 Spline; 6 Bolts;
- Mile Marker Supreme Manual Hub
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
- Stainless Steel Cap And Dial
- All Metal Construction
- Waterproof
- Corrosion Resistant
- Check Fitment Guide For Fit
- Changed Automatic To Manual-Nut Kit May Be Required.
- Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Suzuki Samurai |
- 26 Spline; 6 Bolts
- Mile Marker Supreme Manual Hub; 26 Spline; 6 Bolts;
- Mile Marker Supreme Manual Hub
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
- Stainless Steel Cap And Dial
- All Metal Construction
- Waterproof
- Corrosion Resistant
- Check Fitment Guide For Fit
- Changed Automatic To Manual-Nut Kit May Be Required.
- Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Additional Fitment Information:
| Vehicle |
|---|
| 1988 - Suzuki Samurai |
- Non-Greaseable Premium Universal Joint
- Premium
- MOOG Non-Greaseable Premium 398 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 0.985
- 25.0
- Bearing Diameter A - mm: 25.0
- Length Axis 1:
- 2.53
- 64.2
- Length Axis 2:
- 2.53
- 64.2
- Length A - Inch: 2.53
- OE Series: Mitsubishi
- Length A - mm: 64.2
- Bearing Diameter A - Inch: 0.985
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 0.985
- 25.0
- Bearing Diameter B - Inch: 0.985
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 2.53
- Length B - mm: 64.2
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 25.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates?
- KEEPS DIRT OUT -- Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-1557, 114-310, 11557, 1503, 20131, 20310, 220-0081, 281557, 45U0016, 5-1503X, DT1503, GUM-81, U1503
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1988 - Suzuki Samurai | Rear Driveshaft at Rear Axle | 4WD |
Showing 1 - 10 of 19 products
Loading...