Image
Product
Price
- Fuel Cap
- Non-Vented Black Cap
- Standard
- Product Attributes:
- Vented: No
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-19701, 10825, 11825, 12F51, 1725179915, 20804101, 20962524, 22821353, 22821354, 22921365, 22921366, 22944177, 22944270, 22992634, 22997859, 23368720, 30003995, 30005314...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1993 - Toyota T100 | V | 2959 | GAS | 6 Cyl 3.0L | - |
- Tethered Fuel Cap
- Non-Vented Black Cap
- Tethered
- Product Attributes:
- Vented: No
- Lockable: No
- Tethered: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10825T, 23368720, 23373281, 290410, 6825T, 703-1889, 9MGC825T, MGC825T
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1993 - Toyota T100 | V | 2959 | GAS | 6 Cyl 3.0L | - |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 275
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 262, 0 986 452 003, 0 986 452 019, 0 986 452 027, 0 986 452 035, 0 986 452 038, 0 986 452 044, 0 986 AF0 055, 0 986 AF0 138, 0 986 AF0 207, 0 986 AF1 046, 0 986 AF1 073, 0 986 AF1 078, 0 986 AF1 129, 00013504996, 0060290915004, 0122-0645, 019005200039...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 1993 - Toyota T100 | V | 2959 | Canada | 6 Cyl 3.0L | - |
- 26 Spline; 6 Bolts Conversion Kit Req. To Convert Automatic Hubs To Manual Hubs PN[95-29918]
- Mile Marker Supreme Manual Hub; 26 Spline; 6 Bolts;
- Mile Marker Supreme Manual Hub
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
- Stainless Steel Cap And Dial
- All Metal Construction
- Waterproof
- Corrosion Resistant
- Check Fitment Guide For Fit
- Changed Automatic To Manual-Nut Kit May Be Required.
- Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - Toyota T100 |
- 26 Spline; 6 Bolts Conversion Kit Req. To Convert Automatic Hubs To Manual Hubs PN[95-29918]
- Mile Marker Supreme Manual Hub; 26 Spline; 6 Bolts;
- Mile Marker Supreme Manual Hub
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Ultimate In Style And Service
- Latest Patented Technology
- Smooth Operation
- Limited Lifetime Warranty
- Stainless Steel Cap And Dial
- All Metal Construction
- Waterproof
- Corrosion Resistant
- Check Fitment Guide For Fit
- Changed Automatic To Manual-Nut Kit May Be Required.
- Ultimate in style and service. Latest patented technology. Smooth operation. Limited lifetime warranty. 10 spline, 6 bolts. Chrome.
Additional Fitment Information:
| Vehicle |
|---|
| 1993 - Toyota T100 |
- Greaseable Super Strength Universal Joint
- Inside Lock Rings Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 285 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.142
- 29.0
- Bearing Diameter A - mm: 29.0
- Length Axis 1:
- 2.047
- 52.0
- Length Axis 2:
- 2.047
- 52.0
- Length A - Inch: 2.047
- OE Series: Toyota
- Length A - mm: 52.0
- Bearing Diameter A - Inch: 1.142
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.142
- 29.0
- Bearing Diameter B - Inch: 1.142
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.047
- Length B - mm: 52.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 29.0
- Lube Fitting Location: Regular Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1993 - Toyota T100 | At Transmission | RWD |
- Greaseable Super Strength Universal Joint
- Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 285 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.142
- 29.0
- Bearing Diameter A - mm: 29.0
- Length Axis 1:
- 2.047
- 52.0
- Length Axis 2:
- 2.047
- 52.0
- Length A - Inch: 2.047
- OE Series: Toyota
- Length A - mm: 52.0
- Bearing Diameter A - Inch: 1.142
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.142
- 29.0
- Bearing Diameter B - Inch: 1.142
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.047
- Length B - mm: 52.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 29.0
- Lube Fitting Location: Regular Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
45U0165
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1993 - Toyota T100 | Front Driveshaft at Front Axle | 4WD |
- Greaseable Super Strength Universal Joint
- Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 285 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.142
- 29.0
- Bearing Diameter A - mm: 29.0
- Length Axis 1:
- 2.047
- 52.0
- Length Axis 2:
- 2.047
- 52.0
- Length A - Inch: 2.047
- OE Series: Toyota
- Length A - mm: 52.0
- Bearing Diameter A - Inch: 1.142
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.142
- 29.0
- Bearing Diameter B - Inch: 1.142
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.047
- Length B - mm: 52.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 29.0
- Lube Fitting Location: Regular Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1993 - Toyota T100 | Rear Driveshaft at Transmission | 4WD |
- Greaseable Super Strength Universal Joint
- Inside Lock Rings Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 285 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Grooved Round Bearings
- Bearing Cap Axis 2 Diameter:
- 1.142
- 29.0
- Bearing Diameter A - mm: 29.0
- Length Axis 1:
- 2.047
- 52.0
- Length Axis 2:
- 2.047
- 52.0
- Length A - Inch: 2.047
- OE Series: Toyota
- Length A - mm: 52.0
- Bearing Diameter A - Inch: 1.142
- Bearing Type B: Round Grooved
- Bearing Cap Axis 1 Diameter:
- 1.142
- 29.0
- Bearing Diameter B - Inch: 1.142
- Bearing Type A: Round Grooved
- Greaseable: Yes
- U-Joint Identification: 4 Grooved Round Bearings
- Image: Ujoint_4grooved.tif
- Length B - Inch: 2.047
- Length B - mm: 52.0
- Length Measurement B: Inside Of Groove To Inside Of Groove Plus Thickness Of 2 Lock Rings
- Bearing Diameter B - mm: 29.0
- Lube Fitting Location: Regular Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Groove To Outside Of Groove
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1993 - Toyota T100 | At Center Bearing | RWD |
- Locking Fuel Cap
- Non-Vented Black Cap
- Locking
- Product Attributes:
- Vented: No
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10595, 1078-317696, 11595, 12F24L, 191201551D, 1H0201553B, 20968135, 31675, 40795, 533201551C, 5795, 703-1610, 895201551, 9MGC795, G795, MGC795, P5795
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 1993 - Toyota T100 | V | 2959 | GAS | 6 Cyl 3.0L | - |
Showing 1 - 10 of 23 products
Loading...