Image
Product
Price
- Keyed Alike Locking Fuel Cap
- Vented Black Cap Includes 1 cap, same key. Multiples available
- Keyed Alike
- Product Attributes:
- Freight Class: 85
- Shell Diameter (in): 2.938
- Fuel Cap Venting: Emission Control
- Tethercluded: No
- Locking: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
17508, 9MGC210KA, MGC210KA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Viper | V | 8275 | 10 Cyl 8.3L | 505 |
- Tethered Fuel Cap
- Vented Black Cap
- Tethered
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10838T, 10842T, 10871T, 290414, 310102C800, 52030379AB, 52030387AB, 52030433AB, 6837T, 703-1894, 9MGC837T, MGC837T
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Viper | V | 8275 | 10 Cyl 8.3L | 505 |
- Locking Fuel Cap
- Vented Black Cap
- Locking
- Product Attributes:
- Vented: Yes
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10508, 10508D, 10508Y, 10512, 1078-290306, 11508, 11508Y, 12F35L, 31836, 31846, 40907, 5278655AB, 5907, 59070, 703-1715, 9MGC907, MGC907, MGC907SK...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Viper | V | 8275 | 10 Cyl 8.3L | 505 |
- Fuel Cap
- Vented Black Cap
- Standard
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-290315, 10838, 10838D, 10838Y, 10842, 11838, 11838Y, 12F60, 16447000030, 1644700030, 1644700130, 1664700030, 1664705800, 1711A004, 172511LA0B, 172511PA0B, 172515M000, 172519AA0A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Viper | V | 8275 | 10 Cyl 8.3L | 505 |
- Key Vent Fuel Cap
- Vented Black Cap
- Key Vent
- Product Attributes:
- Vented: Yes
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-316615, 40912, 5910, 5910A, 703-1793, 9MGC912, MGC912, NI, P5910
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Viper | V | 8275 | 10 Cyl 8.3L | 505 |
- Oil Filter
- H-4 in.; OD-3.66 in.; 3/4 In. - 16 UNF-2B Thread; psi Relief Valve 8-11 Premium Oil Filter w/Wrench Off Nut
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Thread Size: .750 In. - 16unf-2b
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Style: Canister
- Item Weight: 1.200 Lbs. (0.6 Kg)
- Product Box Height: 4.500 In. (114mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.880 In. (98mm)
- Package Material: Paperboard
- Product Box Length: 3.880 In. (98mm)
- PSI Relief Valve: 8-11
- Outside Diameter: 3.656 In. (93mm)
- Removal Nut: Yes
- Item Height: 4.000 In. (102mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
021115351A, 102318005, 102618005, 111836, 11436936, 11711396, 121965, 1220185, 1220325, 1220893, 122B185, 122P185, 126385A1, 12662862, 129009, 12H3274, 132023, 1336188C1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Viper | V | 8275 | 10 Cyl 8.3L | 505 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.66
- Capacity: 0.00
- Burst Pressure: 340
- Duty Type: Ld
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Media Material: Synthetic
- Class: A
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 251, 0 986 AF0 270, 0418096, 05037333AA, 05037836AA, 052810190AB, 05281090, 05281090AA, 05281090AB, 0602041173, 0FE00292, 10-09-986, 1085, 13.30.07/110, 15208-D9705, 15421, 170, 1732132432...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Dodge Viper | V | 8275 | Mexico | 10 Cyl 8.3L | 505 |
- Champion Copper Plus- Boxed - RC12ECC
- Gap 0.035in; Plug Type RC12ECC Actual OE Part
- Champion Copper Plus 438 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.035
- 0.90
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.29
- Resistor Type: Yes
- Plug Type: Rc12ecc
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 10
- Most jobs typically require 10 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
RC12ECC, ZFR5N
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Dodge Viper | V | 8275 | 10 Cyl 8.3L | 505 |
- Non-Greaseable Super Strength Universal Joint
- 1.188 (in) Bearing Caps Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 231 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2-0053BF, 20053G, 20054P, 210-0447, 282, 45U0123, 5-282X, 5-471X, DT447, G5-447X, U178HP
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Dodge Viper | At Rear Axle |
- PRO-TEC Spin-On Lube Filter
- Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.66
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 340
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1085, 170, 21085, 31085, 5001200185, 51085, 51085XP, 61085, 61085BP, 61521, 618-51085, 8-51085, 85085, 85085HD, AA16, B4670, CF107, CF107AP...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2005 - Dodge Viper | V | 8275 | Mexico | 10 Cyl 8.3L | 505 |
Showing 1 - 10 of 18 products
Loading...