Image
Product
Price
- Keyed Alike Locking Fuel Cap
- Vented Black Cap Includes 1 cap, same key. Multiples available
- Keyed Alike
- Product Attributes:
- Freight Class: 85
- Shell Diameter (in): 2.938
- Fuel Cap Venting: Emission Control
- Tethercluded: No
- Locking: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
17508, 9MGC210KA, MGC210KA
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2005 - Jeep TJ | L | - | 4 Cyl 2.4L | 148 |
- OE Equipped with Ceramic Pads
- R-Line; Ceramic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 5.530
- Outer Pad Height: 1.940
- Outer Pad Width: 5.530
- Inner Pad Height: 1.940
- Inner Pad Overall Thickness: 0.204
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.204
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
05083882AC, 05083882AE, 05093511AB, 105.09641, 106.09641, 14-981-12, 16-981, 16-981-12, 17-981, 171109, 17981, 24-981-02, 28-981, 28-981-01, 301.09641, 308.09641, 500.09641, 5083882AC...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Jeep TJ | Rear |
- OE Equipped with Ceramic Pads
- R-Line; Metallic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 6.970
- Outer Pad Height: 2.160
- Outer Pad Width: 6.970
- Inner Pad Overall Thickness: 0.205
- Mounting Hardware Included: Yes
- Friction Material Composition: Metallic
- Outer Pad Overall Thickness: 0.205
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
04713175, 0477.10, 0477.20, 0477.80, 04778058, 04778058AB, 04778058AC, 04778059, 04883344, 04883344AB, 04883344AC, 04883344AD, 05252531, 100.04770, 102.04770, 103.04770, 104.04770, 105.04770...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Jeep TJ | Front |
- OE Equipped with Ceramic Pads
- R-Line; Ceramic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 6.970
- Outer Pad Height: 2.160
- Outer Pad Width: 6.970
- Inner Pad Overall Thickness: 0.205
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.205
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
04713175, 0477.10, 0477.20, 0477.80, 04778058, 04778058AB, 04778058AC, 04778059, 04883344, 04883344AB, 04883344AC, 04883344AD, 05252531, 100.04770, 102.04770, 103.04770, 104.04770, 105.04770...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Jeep TJ | Front |
- CHROMOLY AXLE SHAFT - DANA 44
- with 30 Spline Teeth with 31.84in Axle with 5-760X Universal Joint - Required with Dana 44 Axle
- FSGR
- Product Attributes:
- Axle Type: Inner
- Retainer Ring Included: N
- Quantity: 1
- ABS/Non-ABS: Non-abs
- ABS Sensor Ring Installed: N
- Axle Model: Dana 44
- Outer Axle Included: N
- Seal Kit Included: N
- Wheel Bearing Included: N
- Wheel Nuts Included: N
- ABS Tone Ring Included: No
- Full-Floating Or Semi-Floating: Semi-floating
- Includes Tone: N
- Seal Included: N
- Inner Axle Included: Y
- Wheel Studs Included: N
- Axle Shaft Included: Y
- U-Joint Included: N
- Spline Count: 30 Inboard
- Wheel Bolt Prep Kit Included: N
- Cover Bolt Quantity: 10
- Bearing Included: N
-
Features:
- Engineered to exceed the OE standards and meet the exacting needs of off-road environments.
- SAE 4340 nickel chromoly steel construction for ideal hardness throughout the part.
- Nickel provides additional toughness and chromium ensures high temperature strength along with resistance to abrasion.
- Heat treatment process delivers consistent surface and face hardness while achieving a higher core hardness for greater strength.
- These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.
This Part Fits the Following OEM/Substitute Numbers:
DS10007746, MG20114B, YA W39602
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Jeep TJ | Front Right Inner | Rubicon |
- CHROMOLY AXLE SHAFT - DANA 44
- with 16.96in Axle with 30 Spline Teeth with 5-760X Universal Joint - Required with Dana 44 Axle
- FSGR
- Product Attributes:
- Axle Type: Inner
- Retainer Ring Included: N
- Quantity: 1
- ABS/Non-ABS: Non-abs
- ABS Sensor Ring Installed: N
- Axle Model: Dana 44
- Outer Axle Included: N
- Seal Kit Included: N
- Wheel Bearing Included: N
- Wheel Nuts Included: N
- ABS Tone Ring Included: No
- Full-Floating Or Semi-Floating: Semi-floating
- Includes Tone: N
- Seal Included: N
- Inner Axle Included: Y
- Wheel Studs Included: N
- Axle Shaft Included: Y
- U-Joint Included: N
- Spline Count: 30 Inboard
- Wheel Bolt Prep Kit Included: N
- Cover Bolt Quantity: 10
- Bearing Included: N
-
Features:
- Engineered to exceed the OE standards and meet the exacting needs of off-road environments.
- SAE 4340 nickel chromoly steel construction for ideal hardness throughout the part.
- Nickel provides additional toughness and chromium ensures high temperature strength along with resistance to abrasion.
- Heat treatment process delivers consistent surface and face hardness while achieving a higher core hardness for greater strength.
- These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.
This Part Fits the Following OEM/Substitute Numbers:
DS10007745, MG20125B, YA W39601
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Jeep TJ | Front Left Inner | Rubicon |
- CHROMOLY AXLE SHAFT - DANA 44
- with Dana 44 Axle with 16.96in Axle with 30 Spline Teeth with 5-760X Universal Joint - Required
- FSGR
- Product Attributes:
- Axle Type: Inner
- Retainer Ring Included: N
- Quantity: 1
- ABS/Non-ABS: Non-abs
- ABS Sensor Ring Installed: N
- Axle Model: Dana 44
- Outer Axle Included: N
- Seal Kit Included: N
- Wheel Bearing Included: N
- Wheel Nuts Included: N
- ABS Tone Ring Included: No
- Full-Floating Or Semi-Floating: Semi-floating
- Includes Tone: N
- Seal Included: N
- Inner Axle Included: Y
- Wheel Studs Included: N
- Axle Shaft Included: Y
- U-Joint Included: N
- Spline Count: 30 Inboard
- Wheel Bolt Prep Kit Included: N
- Cover Bolt Quantity: 10
- Bearing Included: N
-
Features:
- Engineered to exceed the OE standards and meet the exacting needs of off-road environments.
- SAE 4340 nickel chromoly steel construction for ideal hardness throughout the part.
- Nickel provides additional toughness and chromium ensures high temperature strength along with resistance to abrasion.
- Heat treatment process delivers consistent surface and face hardness while achieving a higher core hardness for greater strength.
- These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Jeep TJ | Front Left Inner | Rubicon |
- CHROMOLY AXLE SHAFT - DANA 44
- with Dana 44 Axle with 30 Spline Teeth with 31.84in Axle with 5-760X Universal Joint - Required
- FSGR
- Product Attributes:
- Axle Type: Inner
- Retainer Ring Included: N
- Quantity: 1
- ABS/Non-ABS: Non-abs
- ABS Sensor Ring Installed: N
- Axle Model: Dana 44
- Outer Axle Included: N
- Seal Kit Included: N
- Wheel Bearing Included: N
- Wheel Nuts Included: N
- ABS Tone Ring Included: No
- Full-Floating Or Semi-Floating: Semi-floating
- Includes Tone: N
- Seal Included: N
- Inner Axle Included: Y
- Wheel Studs Included: N
- Axle Shaft Included: Y
- U-Joint Included: N
- Spline Count: 30 Inboard
- Wheel Bolt Prep Kit Included: N
- Cover Bolt Quantity: 10
- Bearing Included: N
-
Features:
- Engineered to exceed the OE standards and meet the exacting needs of off-road environments.
- SAE 4340 nickel chromoly steel construction for ideal hardness throughout the part.
- Nickel provides additional toughness and chromium ensures high temperature strength along with resistance to abrasion.
- Heat treatment process delivers consistent surface and face hardness while achieving a higher core hardness for greater strength.
- These genuine Spicer high performance axle shafts are optimized for use with larger tires. Get optimal strength and durability, plus the Dana backed innovation that is built into every Spicer axle shaft.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Jeep TJ | Front Right Inner | Rubicon |
- Includes Transmission Mounting Plate; Hardware; 1/4 in. Thick; Steel; Provides 2 in. Of Additional Clearance Slip Yoke Eliminator Required PN[50-7906]~Requires 1.25 in. Body Lift PN[1157]~Requires Extended Rear CV Drive Shaft~Requires 1 in. Motor Mount Kit PN[1156]~Install Time 3-4 Hours
- High Clearance Skid Plate; Includes Transmission Mounting Plate; Hardware; 1/4 in. Thick; Steel; Provides 2 in. Of Additional Clearance;
- High Clearance Skid Plate
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Made From Heavy Duty 1/4 in. Steel
- Gain Up To 2 in. Of Additional Clearance
- Put the shovel to rest with Rough Countrys new High Clearance Skid Plate. Made from heavy-duty quarter in. steel, this super tough belly pan protects the underside of your vehicle from off-road hazards. With its innovative design the skid plate sits snug to the vehicle, avoiding hang-ups your factory plate cant and allowing an additional 2in of clearance. The pronounced lip traverses rocks and dirt with ease. A powdercoat helps ward off the elements as well as it gives the vehicle a killer look.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Jeep TJ | Transmission | Sport |
- Includes Transmission Mounting Plate; Hardware; 1/4 in. Thick; Steel; Provides 2 in. Of Additional Clearance Requires 1.25 in. Body Lift PN[1157]~Requires Extended Rear CV Drive Shaft~Requires 1 in. Motor Mount Kit PN[1156]~Requires Compressor Relocation Bracket PN[1123]~Install Time 3-4 Hours
- High Clearance Skid Plate; Includes Transmission Mounting Plate; Hardware; 1/4 in. Thick; Steel; Provides 2 in. Of Additional Clearance;
- High Clearance Skid Plate
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Made From Heavy Duty 1/4 in. Steel
- Gain Up To 2 in. Of Additional Clearance
- Put the shovel to rest with Rough Countrys new High Clearance Skid Plate. Made from heavy-duty quarter in. steel, this super tough belly pan protects the underside of your vehicle from off-road hazards. With its innovative design the skid plate sits snug to the vehicle, avoiding hang-ups your factory plate cant and allowing an additional 2in of clearance. The pronounced lip traverses rocks and dirt with ease. A powdercoat helps ward off the elements as well as it gives the vehicle a killer look.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Jeep TJ | Transmission | Rubicon |
Showing 1 - 10 of 44 products
Loading...