Shop By Product Matching "MG"
Choose your Submodel for your 2009 Ford Crown Victoria
Image
Product
Price
- Fuel Cap
- Non-Vented Black Cap
- Standard
- Product Attributes:
- Vented: No
- Lockable: No
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
1078-290316, 10840, 10840D, 10840Y, 11840, 11840Y, 12F63, 31841, 40839, 4F1Z9030BA, 4L2Z9030AA, 4L3Z9030AB, 5L2Z9030A, 6839, 6L2Z9030AA, 6L2Z9030E, 6L2Z9030F, 6L8Z9030C...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Ford Crown Victoria | V | - | GAS | 8 Cyl 4.6L | 281 |
- PRO-TEC Spin-On Lube Filter
- Standard Factory filled synthetic oil - WIX XP or WIX Premium Master Pack Version ; Oil Drain Intervals of up to 5000 miles
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.668
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 11-13 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 275
- BetaRatio: 2/20=12/25
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- Protec Oil Filters provide good engine protection using conventional motor oil for everyday normal driving conditions such as city and highway travel. Recommended for traditional oil and filter change intervals, typically 3,000 to 5,000 miles. Laboratory Test Performance per ISO 454812 13 grams dirt (Protec 101), 95% efficient at 29 microns (Based on Protec 164, 115, 101)
This Part Fits the Following OEM/Substitute Numbers:
1372, 159, 21372, 31372, 5001200189, 51372, 51372XP, 61372, 61372BP, 61372X, 618-51372, 8-51372, 85372, AA2, B4651, CF110, CF110AP, D407...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Ford Crown Victoria | V | - | Mexico | 8 Cyl 4.6L | 281 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version Standard Factory filled synthetic oil - WIX XP or WIX Premium ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.668
- Capacity: 0.00
- Burst Pressure: 275
- Duty Type: Ld
- Flow Rate: 11-13 Gpm
- Style: Spin-on Lube Filter
- Media Material: Synthetic
- Class: A
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 333, 0 451 103 334, 0 986 AF0 068, 0 986 AF1 138, 0 986 AF1 172, 00FE00336, 0410813, 0986627634, 0D5419, 0FE00336, 10028130, 1220841, 1372, 1501014, 1503016, 15426, 159, 1AML00006A...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Ford Crown Victoria | V | - | Mexico | 8 Cyl 4.6L | 281 |
- Tethered Fuel Cap
- Non-Vented Black Cap
- Tethered
- Product Attributes:
- Vented: No
- Lockable: No
- Tethered: Yes
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10840T, 290416, 6839T, 703-1896, 9MGC839T, HC3Z9030B, MGC839T
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Ford Crown Victoria | V | - | GAS | 8 Cyl 4.6L | 281 |
- Locking Fuel Cap
- Non-Vented Black Cap
- Locking
- Product Attributes:
- Vented: No
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10510, 10510D, 10510Y, 1078-290307, 11510, 11510Y, 12F39L, 31842, 40902, 5902, 703-1723, 9MGC902, MGC902, MGC902SK, P5902
Additional Fitment Information:
| Vehicle | Block | CC | Fuel Type | Engine | CID |
|---|---|---|---|---|---|
| 2009 - Ford Crown Victoria | V | - | GAS | 8 Cyl 4.6L | 281 |
- OE Equipped with Ceramic Pads without Police Package
- R-Line; Ceramic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 7.290
- Outer Pad Height: 2.420
- Outer Pad Width: 7.290
- Inner Pad Height: 2.420
- Inner Pad Overall Thickness: 0.260
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.260
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0931.20, 100.09310, 102.09310, 103.09310, 104.09310, 105.09310, 106.09310, 106.09311, 14-931-12, 16-931, 16-931-12, 17-931, 17931, 24-931-02, 26-931, 26-931-02, 28-931, 28-931-01...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Ford Crown Victoria | Front |
- OE Pad Material is Semi-Metallic with Police Package
- R-Line; Metallic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 7.290
- Outer Pad Height: 2.420
- Outer Pad Width: 7.290
- Inner Pad Height: 2.420
- Inner Pad Overall Thickness: 0.260
- Mounting Hardware Included: Yes
- Friction Material Composition: Metallic
- Outer Pad Overall Thickness: 0.260
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Ford Crown Victoria | Front |
- OE Pad Material is Semi-Metallic with Police Package
- R-Line; Ceramic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 7.290
- Outer Pad Height: 2.420
- Outer Pad Width: 7.290
- Inner Pad Height: 2.420
- Inner Pad Overall Thickness: 0.260
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.260
- They are sold as a set and only quantity 1 is required for both wheels
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Ford Crown Victoria | Front |
- OE Equipped with Ceramic Pads without Police Package
- R-Line; Metallic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 7.290
- Outer Pad Height: 2.420
- Outer Pad Width: 7.290
- Inner Pad Height: 2.420
- Inner Pad Overall Thickness: 0.260
- Mounting Hardware Included: Yes
- Friction Material Composition: Metallic
- Outer Pad Overall Thickness: 0.260
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
0931.20, 100.09310, 102.09310, 103.09310, 104.09310, 105.09310, 106.09310, 106.09311, 14-931-12, 16-931, 16-931-12, 17-931, 17931, 24-931-02, 26-931, 26-931-02, 28-931, 28-931-01...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Ford Crown Victoria | Front |
- OE Equipped with Ceramic Pads
- R-Line; Ceramic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 5.910
- Outer Pad Height: 1.550
- Outer Pad Width: 5.910
- Inner Pad Height: 1.550
- Inner Pad Overall Thickness: 0.201
- Mounting Hardware Included: Yes
- Friction Material Composition: Ceramic
- Outer Pad Overall Thickness: 0.201
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
4W1Z2200AA, 6W1Z2200AA, AL5Z2200A, D1040AC, FD1040A, PD1040A, QC1040A, SX1040A, ZD1040A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2009 - Ford Crown Victoria | Rear |
Showing 1 - 10 of 28 products
Loading...