Shop By Product Matching "MG"
Choose your Submodel for your 2016 Ford Expedition
Image
Product
Price
- R-Line; Metallic
- Product Attributes:
- California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
- Inner Pad Width: 6.540
- Outer Pad Height: 2.160
- Outer Pad Width: 6.540
- FMSI Number: D1279-8395
- Inner Pad Height: 2.380
- Inner Pad Overall Thickness: 0.825
- Friction Material Composition: Metallic
- Outer Pad Overall Thickness: 0.780
- They are sold as a set and only quantity 1 is required for both wheels
This Part Fits the Following OEM/Substitute Numbers:
102.12790, 104.12790, 105.12790, 106.12790, 16-1279, 17-1279, 171279, 300.12790, 301.12790, 308.12790, 500.12790, 7L1Z2200A, 7L1Z2200B, 8395-Z, BL1Z2200A, BP1279, BRF1279A, CL1Z2200A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2016 - Ford Expedition | Rear |
- WIX Air Filter Panel
- Original Equipment Part Number 7C3Z9601A Standard Version
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Duty Type: Ld
- Length: 10.49
- Style: Air Filter Panel
- Media Material: Enhanced Cellulose
- Class: A
- Outlet: 0.00
- Cubic Feet Per Minute Rating: 500
- Inlet: 0.00
- WIX Premium Panel Air Filters provide excellent engine protection for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM air filter change intervals. These filters contain 30% more media than OES filters and use a phenolic resin treated enhanced cellulose media which provides excellent durability against moisture ingestion. When applicable, the high-tear strength polyurethane seal survives extreme hot and cold temperature conditions. Air filter Laboratory Tests per ISO 5011 at least 99.5% efficiency (Based on Wix 42389)
This Part Fits the Following OEM/Substitute Numbers:
0AC00368, 1433410, 29883, 33-2385, 49883, 5000200159, 619-49883, 683, 69883, 73780, 7C349601AA, 7C349601AB, 7C3Z9601A, 83883, 9-49883, 9883, A19890, A2883...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | Mexico | 6 Cyl 3.5L | 213 |
- WIX Spin-On Lube Filter
- Also Available In Master Pack Version Factory filled synthetic oil - WIX XP or WIX Premium ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.942
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Flow Rate: 10-12 Gpm
- Style: Spin-on Lube Filter
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0410843, 0FE00386, 121, 1502021, 1502075, 157502, 1AML00031A, 27502, 27502MP, 2OMD009, 3502, 37502, 4151YZZA6, 47502, 57502, 57502XP, 618-57502, 67502...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | Mexico | 6 Cyl 3.5L | 213 |
- Replacement Air Filter
- Panel; H-1 in.; L-10.5 in.; W-9.875 in.
- K/N s replacement High-Flow Air Filters are designed to increase horsepower while providing exceptional engine protection; and are covered by K/N s No-Hassle Lifetime Limited Warranty.
- Air Filter
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- WARNING CA Proposition 65: Yes
- Width: 9.875 In.
- Item Weight: 1.400 Lbs. (0.6 Kg)
- Machine Washable: Yes
- Product Box Height: 11.560 In. (294mm)
- Filter Material: Cotton Gauze
- Inside Diameter: Oem
- Product Box Width: 1.750 In. (44 Mm)
- Product Box Length: 10.440 In. (265mm)
- Outside Diameter: Oem
- Item Height: 1.000 In. (25mm)
- Prop 65 (C, R or CR): Cr
- Package Content: 1
- Pre-Screened: No
- Automotive Item Grade: High Performance
- Outside Width: 9.875 In. (251mm)
- Package Contents: 1 Air Filter
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Flange Angle: 0 Degree
- Overall Length: N/a
- Package Quantity: 1
- Shape: Panel
- Package Material: Paperboard
- Frame Design: Flexible
- Filter Re-Oiling Amount: 2.21 Oz (65 Ml)
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Cap Outside Diameter: N/a
- Filter Style: Dry
- Outside Length: 10.500 In. (267mm)
- Package Type: Box
-
Features:
- Designed To Boost Horsepower And Acceleration
- Washable And Reusable
- High Air Flow With Exceptional Filtration
- Lasts Up To 50000 Miles Before Cleaning
- Works With Original Equip. Mfg. Vehicle Electronics
- Will Not Void Vehicle Warranty
- Million Mile Limited Warranty
- K&N washable, reusable High-Flow Air Filters feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N's No-Hassle Lifetime Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N's most popular product!
This Part Fits the Following OEM/Substitute Numbers:
2820385, 49883, 5000200159, 7C3Z9601A, 83883, A1760, A3154C, A35642, AF1333, AF2883, AL349601CA, CA10262, DA2883, DA6700, DW83883, FA1883, HPR10262, LX3066...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | EL Platinum | 213 |
- Greaseable Super Strength Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint
- MOOG Greaseable Super Strength 232 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
114578B, 2154178, 45U0109
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2016 - Ford Expedition | At Center Bearing | RWD |
- Non-Greaseable Super Strength Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 231 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2-0053BF, 20053G, 20054P, 210-0447, 282, 45U0123, 5-282X, 5-471X, DT447, G5-447X, U178HP
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2016 - Ford Expedition | Rear Driveshaft at Transmission | 4WD |
- Greaseable Premium Universal Joint
- 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium
- MOOG Greaseable Premium 331 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.188
- 30.1
- Bearing Diameter A - mm: 30.2
- Length Axis 1:
- 3.625
- 92.1
- Length Axis 2:
- 3.625
- 92.1
- Length A - Inch: 3.625
- OE Series: Spicer 1350 (spl30)
- Length A - mm: 92.1
- Bearing Diameter A - Inch: 1.188
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.188
- 30.2
- Bearing Diameter B - Inch: 1.188
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.625
- Length B - mm: 92.1
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 30.1
- Lube Fitting Location: Regular Lube Fitting In Cross
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
- STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
- INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
- RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
114-10HD, 114-10HP, 114-578, 114-578R, 114-578U, 12471503, 12476231, 12547189, 14067677, 15583283, 15634970, 178, 2-0053, 20053, 20054, 20140, 20190, 20194...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2016 - Ford Expedition | At Center Bearing | RWD |
- Locking Fuel Cap
- Locking Cover
- Locking
- Product Attributes:
- Vented: No
- Lockable: Yes
- Tethered: No
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
This Part Fits the Following OEM/Substitute Numbers:
10524, 31859, 40913, 52029693AG, 5913, 703-1741, 8U5Z9C268B, 9MGC913, A5913, MGC913, P5913
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | 213 |
- Gray; Behind 2nd Row Seating
- Cargo Liner; Gray; Behind 2nd Row Seating;
- Cargo Liner
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Provides Complete Trunk/Cargo Area Protection
- Computer Designed To Fit Your Vehicle
- Raised Lip To Keep Spills/Dirt/Grease Off Interior
- Made From Proprietary Custom Blended TPO
- Flexible Under Extreme Temperatures
- Textured Finish Keeps Cargo From Shifting
- Easy Installation
- Quick And Easy Cleanup
- WeatherTech Cargo Liners provide complete trunk - cargo area protection. Our cargo liners are computer designed to fit your vehicle and have a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your carpeting from normal wear and tear. Made from a proprietary custom blended TPO (thermopolyolefin) that is not only wear resistant, but also remains flexible under temperature extremes. The WeatherTech Cargo Liner features a textured finish which helps to keep cargo from shifting, and is perfect for hauling just about anything. Available in three colors, Black, Tan or Grey. Available for car trunks, SUVs and minivans. WeatherTech Bumper Protector is a great addition to your Cargo Liner to help protect the surface of your vehicle's bumper from dings and scratches when loading or unloading personal items or pets. The Bumper Protector is made from highly durable vinyl fabric that easily snaps onto your Cargo Liner by stainless, rust resistant snaps. The WeatherTech Bumper Protector comes in two sizes: 30 in. long x 30 in. wide and 30 in. long x 40 in. wide. Bumper Protectors are vehicle specific so the correct size option will be shown for your vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | EL Platinum | 213 |
- Gray; Behind 2nd Row Seating
- Cargo Liner; Gray; Behind 2nd Row Seating;
- Cargo Liner
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Provides Complete Trunk/Cargo Area Protection
- Computer Designed To Fit Your Vehicle
- Raised Lip To Keep Spills/Dirt/Grease Off Interior
- Made From Proprietary Custom Blended TPO
- Flexible Under Extreme Temperatures
- Textured Finish Keeps Cargo From Shifting
- Easy Installation
- Quick And Easy Cleanup
- WeatherTech Cargo Liners provide complete trunk - cargo area protection. Our cargo liners are computer designed to fit your vehicle and have a raised lip to keep spills, dirt and grease off your vehicles interior, protecting your carpeting from normal wear and tear. Made from a proprietary custom blended TPO (thermopolyolefin) that is not only wear resistant, but also remains flexible under temperature extremes. The WeatherTech Cargo Liner features a textured finish which helps to keep cargo from shifting, and is perfect for hauling just about anything. Available in three colors, Black, Tan or Grey. Available for car trunks, SUVs and minivans. WeatherTech Bumper Protector is a great addition to your Cargo Liner to help protect the surface of your vehicle's bumper from dings and scratches when loading or unloading personal items or pets. The Bumper Protector is made from highly durable vinyl fabric that easily snaps onto your Cargo Liner by stainless, rust resistant snaps. The WeatherTech Bumper Protector comes in two sizes: 30 in. long x 30 in. wide and 30 in. long x 40 in. wide. Bumper Protectors are vehicle specific so the correct size option will be shown for your vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2016 - Ford Expedition | V | 3496 | 6 Cyl 3.5L | EL Platinum | 213 |
Showing 1 - 10 of 22 products
Loading...