Shop By Product Matching "MG"

Choose your Engine for your 2018 Ford Transit-250


Showing 1 - 10 of 21 products
Image
SKU
Product
Rating
Price

Raybestos
  • R-Line; Metallic
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Inner Pad Width: 5.390
    • Outer Pad Height: 2.220
    • Outer Pad Width: 5.390
    • FMSI Number: D1775-9005
    • Inner Pad Height: 2.320
    • Inner Pad Overall Thickness: 0.685
    • Mounting Hardware Included: Yes
    • Friction Material Composition: Metallic
    • Outer Pad Overall Thickness: 0.685
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
102.17750, 104.17750, 106.17750, 17-1775, 300.17750, 500.17750, CK4Z2200A, CK4Z2200B, CK4Z2200C, DG1775, FD1775, M1775, MX1775, PMD1775H, SBM1775, SCD1775, SX1775

Additional Fitment Information:
Vehicle Position
2018 - Ford Transit-250 Rear

Wix
  • WIX Spin-On Lube Filter
  • Original Equipment Part Number FL500S Also Available In Master Pack Version Factory filled synthetic oil - WIX XP or WIX Premium ; Manufacturer OE Recommended Oil Change Intervals
  • Product Attributes:
    • California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Inner Diameter Top: Closed
    • Outer Diameter Top: 2.942
    • Duty Type: Ld
    • Micron: 21.00
    • BetaRatio: 2/20=6/20
    • Flow Rate: 10-12 Gpm
    • Style: Spin-on Lube Filter
    • Media Material: Enhanced Cellulose
    • Class: A
    • Anti-Drain Back Valve: Yes
  • WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)

This Part Fits the Following OEM/Substitute Numbers:
0410843, 0FE00386, 121, 1502021, 1502075, 157502, 1AML00031A, 27502, 27502MP, 2OMD009, 3502, 37502, 4151YZZA6, 47502, 57502, 57502XP, 618-57502, 67502...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Region Engine CID
2018 - Ford Transit-250 L - Canada 5 Cyl 3.2L 195

Moog
  • Greaseable Super Strength Universal Joint
  • 2 Joint Shaft 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 232 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.188
      • 30.1
    • Bearing Diameter A - mm: 30.2
    • Length Axis 1:
      • 3.625
      • 92.1
    • Length Axis 2:
      • 3.625
      • 92.1
    • Length A - Inch: 3.625
    • OE Series: Spicer 1350 (spl30)
    • Length A - mm: 92.1
    • Bearing Diameter A - Inch: 1.188
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.188
      • 30.2
    • Bearing Diameter B - Inch: 1.188
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.625
    • Length B - mm: 92.1
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 30.1
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:
Vehicle Block CC Position Engine Wheel FeedBase CID
2018 - Ford Transit-250 L - At Transmission 5 Cyl 3.2L 138.0 195

Moog
  • Greaseable Super Strength Universal Joint
  • 4 Joint Shaft 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 232 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.188
      • 30.1
    • Bearing Diameter A - mm: 30.2
    • Length Axis 1:
      • 3.625
      • 92.1
    • Length Axis 2:
      • 3.625
      • 92.1
    • Length A - Inch: 3.625
    • OE Series: Spicer 1350 (spl30)
    • Length A - mm: 92.1
    • Bearing Diameter A - Inch: 1.188
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.188
      • 30.2
    • Bearing Diameter B - Inch: 1.188
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.625
    • Length B - mm: 92.1
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 30.1
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:
Vehicle Position Wheel FeedBase
2018 - Ford Transit-250 At Rear Axle 156.0

Moog
  • Greaseable Super Strength Universal Joint
  • 4 Joint Shaft 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 232 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.188
      • 30.1
    • Bearing Diameter A - mm: 30.2
    • Length Axis 1:
      • 3.625
      • 92.1
    • Length Axis 2:
      • 3.625
      • 92.1
    • Length A - Inch: 3.625
    • OE Series: Spicer 1350 (spl30)
    • Length A - mm: 92.1
    • Bearing Diameter A - Inch: 1.188
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.188
      • 30.2
    • Bearing Diameter B - Inch: 1.188
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.625
    • Length B - mm: 92.1
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 30.1
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:
Vehicle Position Wheel FeedBase
2018 - Ford Transit-250 At Center Bearing 156.0

Moog
  • Greaseable Premium Universal Joint
  • 2 Joint Shaft 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium
  • MOOG Greaseable Premium 331 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.188
      • 30.1
    • Bearing Diameter A - mm: 30.2
    • Length Axis 1:
      • 3.625
      • 92.1
    • Length Axis 2:
      • 3.625
      • 92.1
    • Length A - Inch: 3.625
    • OE Series: Spicer 1350 (spl30)
    • Length A - mm: 92.1
    • Bearing Diameter A - Inch: 1.188
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.188
      • 30.2
    • Bearing Diameter B - Inch: 1.188
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.625
    • Length B - mm: 92.1
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 30.1
    • Lube Fitting Location: Regular Lube Fitting In Cross
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
    • STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
    • INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
    • RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:
114-10HD, 114-10HP, 114-578, 114-578R, 114-578U, 12471503, 12476231, 12547189, 14067677, 15583283, 15634970, 178, 2-0053, 20053, 20054, 20140, 20190, 20194...VIEW MORE

Additional Fitment Information:
Vehicle Block CC Position Engine Wheel FeedBase CID
2018 - Ford Transit-250 L - At Rear Axle 5 Cyl 3.2L 138.0 195

Moog
  • Greaseable Premium Universal Joint
  • 2 Joint Shaft 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Premium
  • MOOG Greaseable Premium 331 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.188
      • 30.1
    • Bearing Diameter A - mm: 30.2
    • Length Axis 1:
      • 3.625
      • 92.1
    • Length Axis 2:
      • 3.625
      • 92.1
    • Length A - Inch: 3.625
    • OE Series: Spicer 1350 (spl30)
    • Length A - mm: 92.1
    • Bearing Diameter A - Inch: 1.188
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.188
      • 30.2
    • Bearing Diameter B - Inch: 1.188
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.625
    • Length B - mm: 92.1
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 30.1
    • Lube Fitting Location: Regular Lube Fitting In Cross
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for fleets, off-highway and commercial vehicles
    • STRONG AND DURABLE -- Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • GREASEABLE DESIGN -- Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
    • INHIBITS PREMATURE WEAR -- Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
    • RELIABLE PERFORMANCE -- Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
  • Backed by superior materials and rigorous testing, MOOG Heavy Duty universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:
Vehicle Block CC Position Engine Wheel FeedBase CID
2018 - Ford Transit-250 L - At Transmission 5 Cyl 3.2L 138.0 195

Moog
  • Greaseable Super Strength Universal Joint
  • 2 Joint Shaft 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 232 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.188
      • 30.1
    • Bearing Diameter A - mm: 30.2
    • Length Axis 1:
      • 3.625
      • 92.1
    • Length Axis 2:
      • 3.625
      • 92.1
    • Length A - Inch: 3.625
    • OE Series: Spicer 1350 (spl30)
    • Length A - mm: 92.1
    • Bearing Diameter A - Inch: 1.188
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.188
      • 30.2
    • Bearing Diameter B - Inch: 1.188
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.625
    • Length B - mm: 92.1
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 30.1
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

This Part Fits the Following OEM/Substitute Numbers:
114578B, 2154178, 45U0109

Additional Fitment Information:
Vehicle Block CC Position Engine Wheel FeedBase CID
2018 - Ford Transit-250 L - At Rear Axle 5 Cyl 3.2L 138.0 195

Moog
  • Greaseable Super Strength Universal Joint
  • 4 Joint Shaft 1.188 (in) Bearing Caps with Steel Driveshaft 0.059 (in) Ring Thickness Greasable Super Strength U-Joint
  • MOOG Greaseable Super Strength 232 U-joint
  • Product Attributes:
    • Bearing Cap Type: 4 Round Plain Bearings
    • Bearing Cap Axis 2 Diameter:
      • 1.188
      • 30.1
    • Bearing Diameter A - mm: 30.2
    • Length Axis 1:
      • 3.625
      • 92.1
    • Length Axis 2:
      • 3.625
      • 92.1
    • Length A - Inch: 3.625
    • OE Series: Spicer 1350 (spl30)
    • Length A - mm: 92.1
    • Bearing Diameter A - Inch: 1.188
    • Bearing Type B: Round Plain
    • Bearing Cap Axis 1 Diameter:
      • 1.188
      • 30.2
    • Bearing Diameter B - Inch: 1.188
    • Bearing Type A: Round Plain
    • Greaseable: Yes
    • U-Joint Identification: 4 Round Plain Bearings
    • Image: Ujoint_4plain.tif
    • Length B - Inch: 3.625
    • Length B - mm: 92.1
    • Length Measurement B: Outside Of Bearing To Outside Of Bearing
    • Bearing Diameter B - mm: 30.1
    • Lube Fitting Location: Flush-type Lube Fitting In Bearing
    • Lubricateable: Yes
    • Length Measurement A: Outside Of Bearing To Outside Of Bearing
  • Features:
    • BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
    • COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
    • CORROSION PROTECTION -- Exclusive MICRO SHIELD├óΓÇ₧┬ó coating protects against rust and corrosion
    • GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
    • KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
    • RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
    • STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
  • Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Additional Fitment Information:
Vehicle Position Wheel FeedBase
2018 - Ford Transit-250 At Transmission 156.0

Raybestos
  • R-Line; Metallic
  • Product Attributes:
    • California Proposition 65: Warning: This Product Can Expose You To Chemicals Including Silica, Which Is Known To The State Of California To Cause Cancer, And Lead, Which Is Known To The State Of California To Cause Birth Defects Or Other Reproductive Harm. For More Information Go T
    • Inner Pad Width: 6.770
    • Outer Pad Height: 2.610
    • Outer Pad Width: 6.770
    • FMSI Number: D1774-9004
    • Inner Pad Height: 2.610
    • Inner Pad Overall Thickness: 0.641
    • Mounting Hardware Included: Yes
    • Friction Material Composition: Metallic
    • Outer Pad Overall Thickness: 0.641
  • They are sold as a set and only quantity 1 is required for both wheels

This Part Fits the Following OEM/Substitute Numbers:
102.17740, 104.17740, 106.17740, 17-1774, 300.17740, 355021571, 500.17740, CK4Z2001A, CK4Z2001B, DG1774, FD1774, M1774, MX1774, PMD1774H, SBM1774, SCD1774, SX1774

Additional Fitment Information:
Vehicle Position
2018 - Ford Transit-250 Front
Showing 1 - 10 of 21 products

Loading...