Shop By Product Matching "Magnaflow"
Choose your Engine for your 2003 Dodge Ram 2500
Image
Product
Price
- OEM Grade Universal Catalytic Converter - 2.50in.
- Not legal for sale or installation in California, Colorado or New York. Cutting and Welding Required
- Magnaflow OEM Grade Universal Catalytic Converter - 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 5
- Body Height: 5
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- Body Length: 8.75
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Oem Grade
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Oem Grade Federal / Epa Compliant Universal Catalytic Converter 51656
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51656. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Drive Type | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | V | - | 8 Cyl 5.7L | RWD | 345 |
- Direct-Fit Exhaust Pipe
- Magnaflow Direct-Fit Exhaust Pipe
- Product Attributes:
- Grade Type: Performance
- Exit Style: Single Passenger Side Rear
- Inlet Inside Diameter: 4
- Finish: Brushed
- Clamps Included: No
- Main Piping Diameter: 4
- Welded Hanger: No
- Color: Stainless
- Outlet Inside Diameter: 4
- Prop 65 Y/N: No
- Title: Magnaflow Performance Exhaust Tailpipe 15452
- Material: Stainless Steel
- Pipe Bend Type: Mandrel
-
Features:
- Durable corrosion-resistant stainless steel construction
- CNC precision robotic manufacturing techniques
- Mandrel bent tubing
- The MagnaFlow Performance Exhaust Tailpipe 15452 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15452 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 75.9 | Crew Cab Pickup | 359 |
- California Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-100 Engine Family Number (EFN) 3CRXT05.96B0 Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.50in.
- 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Series: California
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: D-193-100
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 445006
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- California Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-100 Engine Family Number (EFN) 3CRXT05.96B1 Cutting and Welding Required Legal For Sale In All 50 States Including California, Colorado and New York (CARB Certified)
- Magnaflow California Universal Catalytic Converter - 2.50in.
- 2.50in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Series: California
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: D-193-100
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow California Grade Carb Compliant Universal Catalytic Converter 445006
-
Features:
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | V | - | Left | 8 Cyl 5.7L | 345 |
- California Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-100 Engine Family Number (EFN) 3CRXT05.96B0 Cutting and Welding Required
- Magnaflow California Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California Compliant OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: D-193-100
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- California Universal Catalytic Converter - 2.50in.
- CARB Executive Order D-193-100 Engine Family Number (EFN) 3CRXT05.96B1 Cutting and Welding Required
- Magnaflow California Universal Catalytic Converter - 2.50in.
- 2.50in. Universal California Compliant OBDII Catalytic Converter
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6.375
- Body Height: 3.75
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: Yes
- Inlet Gasket Included: No
- Heat Shield Attached: Yes
- Hangers Included: No
- CARB Executive Order Number: D-193-100
- Body Type: Clam-shell
- Heat Shield Material: Aluminized Steel
- Inlet Inside Diameter: 2.5
- Substrate Material: Ceramic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Outlet Inside Diameter: 2.5
- Sensor Port Count: 0
-
Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | V | - | Left | 8 Cyl 5.7L | 345 |
- HM Grade Universal Catalytic Converter - 4.00in.
- Legal for sale and use in the state of Colorado per regulation number 20, effective 12/15/2023 Not Legal For Sale In California or New York. 4 (in) Diameter Cutting and Welding Required
- Magnaflow HM Grade Universal Catalytic Converter - 4.00in.
- Product Attributes:
- Inlet Orientation: Straight
- Air Tube Count: 0
- Tube Material: Stainless Steel
- Outlet Gasket Included: No
- Outlet Mounting Hardware Included: No
- Body Width: 6
- Body Height: 6
- Inlet Mounting Hardware Included: No
- Body Material: Stainless Steel
- Finish: Stainless Steel
- Clamps Included: No
- Outlet Quantity: 1
- Air Tube Adaptable: No
- California Air Resources Board (CARB) Certified: No
- Inlet Gasket Included: No
- Series: Hm Grade
- Heat Shield Attached: No
- Hangers Included: No
- CARB Executive Order Number: Not Applicable
- Body Type: Spun
- Inlet Inside Diameter: 4
- Substrate Material: Metallic
- Outlet Orientation: Straight
- Inlet Quantity: 1
- Body Shape: Round
- Outlet Inside Diameter: 4
- Prop 65 Y/N: No
- Sensor Port Count: 0
- Title: Magnaflow Hm Grade Federal / Epa Compliant Universal Catalytic Converter 60111
-
Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Compact, lightweight construction enables installation in confined areas, welding is required
- Durable 308 stainless steel MIG welds
- Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 60111. The Universal design allows the part to fit a wide array of vehicles (cutting and welding required), and the stainless steel construction of this spun body catalytic converter is highly resistant to corrosion. The single laser fusion weld of the spun body greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 359 |
- Direct-Fit Exhaust Pipe
- Magnaflow Direct-Fit Exhaust Pipe
- Exhaust Tail Pipe
- Product Attributes:
- Clamps Included: No
- Main Piping Diameter: 4
- Welded Hanger: No
- Grade Type: Performance
- Outlet Inside Diameter: 4
- Exit Style: Single Passenger Side Rear
- Inlet Inside Diameter: 4
- Pipe Bend Type: Mandrel
-
Features:
- Mandrel bent tubing
- CNC precision robotic manufacturing techniques
- Durable corrosion-resistant stainless steel construction
- The MagnaFlow Performance Exhaust Tailpipe 15452 is engineered as a universal component for your truck's exhaust system and optimized for superior flow characteristics and performance. 15452 is mandrel bent, produced using advanced CNC precision robotic manufacturing techniques and features durable, corrosion resistant stainless steel construction. Professional installation is highly recommended.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Bed Length | Body | CID |
|---|---|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | 75.9 | Crew Cab Pickup | 359 |
- Pro Series Diesel 5in. Cat-Back
- Single Passenger Side Rear Exit
- MagnaFlow Pro Series Diesel 5in. Cat-Back
- Product Attributes:
- Muffler Type: Straight-through
- Series: Magnaflow Pro
- Exhaust Tip Quantity: 0
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Muffler Body Width: 7
- Muffler Quantity: 1
- Muffler Body Length: 24
- Clamps Included: Yes
- Main Piping Diameter: 5
- Clamping Type: Band Clamp
- Gasket Or Seal Included: No
- Muffler Body Height: 7
- Muffler Finish: Brushed
- Valve Included: No
- Prop 65 Y/N: No
- Muffler Body Material: Stainless Steel
- Title: Magnaflow Pro Series Cat-back Performance Exhaust System 17876
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
- Type: Cat-back
-
Features:
- Throaty, powerful performance sound Magnaflow is famous for
- Attention grabbing design thanks to an aggressive style
- Intercooled tips
- The MagnaFlow Pro Series Cat-Back Performance Exhaust System17876 enhances your truck with an exhaust that has been weight-optimized and tuned to produce our famous deep signature sound and dyno-proven performance. 17876's mandrel bent 5in. diameter main piping passes through a 1 Straight-Through mufflers before terminating in a Single Passenger Side Rear exit. Exhaust kit 17876 is engineered to produce Aggressive exterior and Moderate interior sound levels. Installation is made easy thanks to this exhaust system's direct-fit, do-it-yourself design. This cat-back emissions-legal exhaust system is made of durable, corrosion resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | Crew Cab Pickup | 359 |
- Pro Series Diesel 5in. Cat-Back
- Single Passenger Side Rear Exit
- MagnaFlow Pro Series Diesel 5in. Cat-Back
- MagnaFlow PRO Series Diesel Cat-Back System
- Product Attributes:
- Muffler Type: Straight-through
- Exhaust Tip Quantity: 0
- Hangers Included: Yes
- Exit Style: Single Passenger Side Rear
- Muffler Body Width: 7
- Muffler Quantity: 1
- Muffler Body Length: 24
- Clamps Included: Yes
- Main Piping Diameter: 5
- Clamping Type: Band Clamp
- Muffler Body Height: 7
- Muffler Finish: Brushed
- Valve Included: No
- Muffler Body Material: Stainless Steel
- Catalytic Converter Quantity: 0
- Pipe Material: Stainless Steel
-
Features:
- Throaty, powerful performance sound Magnaflow is famous for
- Attention grabbing design thanks to an aggressive style
- Intercooled tips
- The MagnaFlow Pro Series Cat-Back Performance Exhaust System17876 enhances your truck with an exhaust that has been weight-optimized and tuned to produce our famous deep signature sound and dyno-proven performance. 17876's mandrel bent 5in. diameter main piping passes through a 1 Straight-Through mufflers before terminating in a Single Passenger Side Rear exit. Exhaust kit 17876 is engineered to produce Aggressive exterior and Moderate interior sound levels. Installation is made easy thanks to this exhaust system's direct-fit, do-it-yourself design. This cat-back emissions-legal exhaust system is made of durable, corrosion resistant stainless steel and produced using CNC precision robotic manufacturing, all backed by MagnaFlow's limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Body | CID |
|---|---|---|---|---|---|
| 2003 - Dodge Ram 2500 | L | - | 6 Cyl 5.9L | Crew Cab Pickup | 359 |
Showing 1 - 10 of 12 products
Loading...