Image
Product
Price
- Jounce Bumper and Bellows
- From Chassis No.CB2MS-543880
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143059, 63620
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Mazda 626 | Front |
- Champion Copper Plus- Boxed - RN12YC
- Resistor Type Gap 0.032in ; Plug Type RN12YC
- Champion Copper Plus 404 Spark Plug (Carton of 4)
- Copper Plus
- Product Attributes:
- Hex Size:
- 0.813
- 20.650
- Reach: 0.75
- Center Electrode Tip Material: Nickel
- Seat Type: Flat
- Electrical Terminal Type: Non-removable Nut
- Pre-Gap Size:
- 0.035
- 0.89
- Classification: Champion Copper Plus
- Ground Electrode Core Material: Nickel
- Insulator Height: 0.12
- Plug Type: Rn12yc
- Hex Size:
- Dependable performance. This Champion® spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
14GR42, 4091713, 4218, 4219, 4220, 5213693, 7507837, 7905, 7922, 8008, 9007, 93206675, 93230927, AGR32C, AGR42, AGR42C, AGR52, AGS32C...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Mazda 626 | L | 1970 | 4 Cyl 2.0L | - |
- NGK G-Power Platinum Spark Plug
- Gap 0.032"
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Standard Replacement
- Service Number: Bpr5egp
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bpr5egp
- Resistor Type: Yes
- Stock Number: 7082
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16"
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.20
- 56.0
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
25164642, 3031, 3322, 3405, 4, 41-827, 4501, 4502, 4708, 6736, 7082, AP2744, AP64, AP65, AP65DP2, AP66, APP646, APP65...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Mazda 626 | L | 1970 | 4 Cyl 2.0L | - |
- NGK Standard Spark Plug
- Gap 0.032" Actual OE Manufacturer
- Standard Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.12
- 3.0
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Grade Type: Standard Replacement
- Service Number: Bpr5es
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bpr5es
- Resistor Type: Yes
- Stock Number: 7734
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .036
- 0.9
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16"
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.13
- 54.0
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode provides consistent performance
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- NGK Standard spark plugs (in the iconic NGK 'yellow box' packaging) are a proven OE cornerstone and technology customers have relied on for decades. Engineered specifically for OE applications, NGK Standard spark plugs provide OE quality nickel alloy reliable performance and design. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance, while triple gasket sealing prevents combustion gas leakage. Solid 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
0000-18-8914, 065-01402-30, 065-01402-80, 065-01404-80, 065-01405-60, 0660-18-110, 08981-999-010, 09482-00131, 09482-00155, 116, 12392-6771-1, 12863-6771-1, 12866-6771-1, 12866-6771-6, 12992-6771-1, 12992-6771-6, 150261430, 160690-78020...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Mazda 626 | L | 1970 | 4 Cyl 2.0L | - |
- NGK V-Power Spark Plug
- Gap 0.032"
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Bpr5ey
- Washer Type: Crush
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Bpr5ey
- Resistor Type: Yes
- Stock Number: 1233
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .032
- 0.8
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Flat
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 13/16"
- Reach:
- 0.750
- 19.0
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.20
- 56.0
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
09482-00219, 09482-00502, 09482-00504, 1002-77-550, 1233, 1765068, 1765096, 1765125, 1765151, 1765219, 1P0Y-18-110, 3027, 3028, 3031, 490010043, 5-81380012, 5-81380012-0, 90048-51047-000...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Mazda 626 | L | 1970 | 4 Cyl 2.0L | - |
- Front, Rear Alignment Camber Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 12 (mm) Bolts
- MOOG K90473 Front, Rear Alignment Camber Kit for Chevrolet Equinox
- Product Attributes:
- Part Description: Alignment Camber Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13321A, 264-3641, 2643641, 41-212, 41212, 413541, 45K18031, 45K18035, 616-1035, 6161031, 770500, 81250, AA3641, K90473, MS90002, TAL10014, VV13321A, VVV13321A...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1981 - Mazda 626 | Front |
- Autolite 64 Copper Spark Plug
- OE Style; Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Regular
- Core Nose Length:
- 0.547
- 13.89
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 13/16
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.223
- 56.46
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
05613522, 14 GR-8 DTU, 14 R-7 DUX, 14 R-8 DU, 14 R-8 DU4, 14 R-8 DUX, 14-8 DTU, 14-8 DU, 14-8 DUO, 19310643, 3000, 32721, 41, 4318131, 43XLS, 494, 5613522, 5614089...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Mazda 626 | L | 1970 | 4 Cyl 2.0L | - |
- Autolite 64 Copper Spark Plug
- Gap .032 (in); Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Regular
- Core Nose Length:
- 0.547
- 13.89
- Washer Type: Flat
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 13/16
- Reach:
- 0.75
- 19.05
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.223
- 56.46
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Mazda 626 | L | 1970 | 4 Cyl 2.0L | - |
This Part Fits the Following OEM/Substitute Numbers:
045310250A, 0K9A210250, 0K9A210250A, 10082, 11082, 12C30, 14082, 145610250, 2078-290334, 2651038000, 31083, 45310250, 703-1332, 8082, 887110250, 887110250A, 9MO82, KK15010250...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1981 - Mazda 626 | L | 1970 | 4 Cyl 2.0L | - |
- Antifreeze/Coolant
- Asian Vehicle Red Antifreeze/Coolant Ready-to-Use 1 GA
- Asian Vehicle Red Ready-to-Use - 1 Gal.
- Product Attributes:
- Container Size: 1.0 Gallon
- Flammable: No
- Recommended Dilution Ratio:
- Pre-mixed
- Ready To Use
- Flash Point - Deg. F: > 250
- Ethylene Glycol: Yes
- Freeze Point - Deg. F: -33
- Standards: Contains Ethylene Glycol Maximum Freezing Point -34f Degrees Minimum Boiling Point 226f Degrees
- Pre-Mixed Or Concentrate: Pre-mixed
- Flash Point - Deg. C: > 121
- Freeze Point - Deg. C: -36
- Type:
- Hybrid Oat (hoat)
- Organic Acid Technology (oat)
-
Features:
- Meets the following OEM and industry specifications: JIS K 2234-1994, Hyundai/KIA MS 591-08, Mitsubishi ES-64217, Ford WSS-M97B55-A, ASTM 3306, ASTM D4985, Federal Specification A-A-870A
- ZEREX™ Asian Vehicle Antifreeze/Coolant is specifically formulated to meet the requirements of Asian vehicle manufacturers (Toyota®, Lexus®, Scion® and others) requiring a red, silicate free Hybrid Organic Acid Technology (HOAT) with a phosphate additive. This patented formula is designed to replace the original fluid and provides protection from rust, corrosion, boil overs and freezing.
Additional Fitment Information:
| Vehicle |
|---|
| 1981 - Mazda 626 |
Showing 1 - 10 of 188 products
Loading...