Image
Product
Price
- Street Extreme:Kit:1957-85 GM 11" x 1-1/8x10
- Street Extreme:Kit:1957-85 GM 11" x 1-1/8x10
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Pressure Plate Style: Diaphragm
- Application: 1957-85 Gm
- Alignment Tool Included: Yes
- Disc Material: Ceramic/ceramic
- Pilot Bushing Included: Yes
- Horsepower Rating: 650
- Make: Gm
- Number of Discs: Single
- Disc Diameter: 11in.
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
- The Street Extreme clutch kit is ideal for both the street and the track. We recommend it for cars up to 700 crank Hp/Tq (depending on part number) with moderate engine mods and street tires. The kit is SFI approved. Included is a high clamp load pressure plate, a dual face ceramic disc for smooth engagement and awesome holding power. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | Manual | 8 Cyl 5.7L | Step-Van | 350 |
- Flywheel: Nodular Iron: Chevrolet: 1955-85 SBC: 168T: 30 lbs.
- Flywheel: Nodular Iron: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 30 lbs.
- Product Attributes:
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Tooth Quantity: 168
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Crankshaft Bolt Hole Quantity: 6
- Engine 2: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Weight: 30 Lbs.
- Make: Chevrolet
-
Features:
- Cast Iron Flywheels are a inexpensive way to replace your old used flywheel with new!
- McLeod nodular iron flywheels offer high-quality, yet low-cost alternatives to the hassles of resurfacing a flywheel. Nodular iron flywheels are stronger than the OEM models, and these McLeod units are direct bolt-in units. Don't overlook your flywheel when replacing your clutch. But don't resurface, replace with McLeod nodular iron flywheels
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | Manual | 8 Cyl 5.7L | Step-Van | 350 |
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 22 lbs.
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 22 lbs.
- Product Attributes:
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Tooth Quantity: 168
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Crankshaft Bolt Hole Quantity: 6
- Engine 2: 1970-1990 Bbc 2pc Seal (large Register)
- Weight: 22 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Make: Chevrolet
- Additional Counter Weight Kit Required: 560222
-
Features:
- McLeod Racing Billet Steel flywheels is the best choice for customers that want a dependable good quality steel flywheel. Made from Billet steel the McLeod Racing flywheels are SFI rated to almost 9000 RPM.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | United States | 8 Cyl 6.2L | Step-Van | 379 |
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 168T: 30 lbs.
- Flywheel: Steel: Chevrolet: 1955-85 SBC: 1970-90 BBC: 2pc Rear Main: Internal Balance: 168T: 30 lbs.
- Product Attributes:
- Pressure Plate Pattern 2: 11 In, 12 In, Borg & Beck/diaphragm
- Tooth Quantity: 168
- Pressure Plate Pattern 1: 10 In, 10.5 In, Borg & Beck/diaphragm
- Engine 1: 1955-85 Sbc 2pc Seal (large Register)
- Crankshaft Bolt Hole Quantity: 6
- Engine 2: 1970-1990 Bbc 2pc Seal (large Register)
- Weight: 30 Lbs.
- Engine 3: 1991-up Bbc 1pc Seal 454, 502, 572 (large Register)
- Make: Chevrolet
- Additional Counter Weight Kit Required: 560222
-
Features:
- McLeod Racing Billet Steel flywheels is the best choice for customers that want a dependable good quality steel flywheel. Made from Billet steel the McLeod Racing flywheels are SFI rated to almost 9000 RPM.
- McLeod steel flywheels are perfect for street applications where easy stop light acceleration is desired. Steel flywheels come in various weights and dimensions. For race applications, a heavier steel unit is ideal for helping launch a heavy car with a smaller engine with less torque and horsepower. They are CNC machined from billet alloy steel and have 1045 hardened steel ring gears.
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | United States | 8 Cyl 5.7L | Step-Van | 350 |
- Bushing Oilite GM Stepped .400 Longer Than Stock .592 ID
- Bushing Oilite GM Stepped .400 Longer Than Stock .592 ID
- Product Attributes:
- NOTE: This Pilot Bushing Fits In The Outer Recess Of The Crank.
- ID (in): .590in.
- Secondary Step OD (in): 1.00in.
- OD (in): 1.709in.
- Thickness: .645in.
- Worn pilot bearings cause rough shifting, which can wear out your transmission. When you change your clutch, count on McLeod for high-quality pilot bearings and bushings to properly align your clutch with the crankshaft.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | Manual | United States | 8 Cyl 5.7L | Step-Van | 350 |
- Street Pro: Kit:1957-85 GM 11" x 1-1/8x10
- Street Pro: Kit:1957-85 GM 11" x 1-1/8x10
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Pressure Plate Style: Diaphragm
- Application: 1957-85 Gm
- Alignment Tool Included: Yes
- Disc Material: Organic
- Pilot Bushing Included: Yes
- Horsepower Rating: 425
- Make: Gm
- Number of Discs: Single
- Disc Diameter: 11in.
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
- The Street Pro is the perfect choice for an entry level performance clutch for the street. We recommend it for cars up to 400hp (depending on part number) with mild engine mods and street tires. Included is a high clamp load pressure plate, an organic disc for smooth and even engagement with increased holding power over stock. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a clutch that's a great step up from your stock set up, the McLeod Street Pro is the clutch for you.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | Manual | 8 Cyl 5.7L | Step-Van | 350 |
- Super Street Pro:Kit:1957-85 GM 11" x 1-1/8x10
- Super Street Pro:Kit:1957-85 GM 11" x 1-1/8x10
- Product Attributes:
- Pilot Bushing Material: Bronze Oilite
- Pressure Plate Style: Diaphragm
- Application: 1957-85 Gm
- Alignment Tool Included: Yes
- Disc Material: Organic/ceramic
- Pilot Bushing Included: Yes
- Horsepower Rating: 525
- Make: Gm
- Number of Discs: Single
- Disc Diameter: 11in.
- Spline: 1-1/8 X 10
- Throwout Bearing Included: Yes
- Flywheel Included: No
-
Features:
- McLeod Racing offers 4 levels of single disc clutches based on power and torque needs. The Street Level, Street Pro, Super Street Pro & the Street Extreme.
- The Super Street Pro clutch kit is ideal for both the street and the track. We recommend it for cars up to 550 Hp (depending on part number) with moderate engine mods and street tires. The kit is SFI approved. Included is a high clamp load pressure plate, a dual faced organic and metallic disc for smooth engagement and awesome holding power. Our kits are complete with Pressure Plate, Disc, throw out bearing (where applicable) pilot bushing (where applicable) and alignment tool. If you are looking for a street friendly yet track proven clutch, the McLeod Super Street Pro is your best choice.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | Manual | 8 Cyl 5.7L | Step-Van | 350 |
- Pilot Bearing GM Except Pontiac 1.095" OD X .592" ID X .740" Long
- Pilot Bearing GM Except Pontiac 1.095" OD X .592" ID X .740" Long
- Product Attributes:
- Height (in):: .740in.
- Inside Diameter (in):: .590in.
- Pilot Bushing Type:: Roller
- Quantity:: Sold Individually
- Outer Diameter (in):: 1.094in.
- Worn pilot bearings cause rough shifting, which can wear out your transmission. When you change your clutch, count on McLeod for high-quality pilot bearings and bushings to properly align your clutch with the crankshaft.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Region | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | Manual | United States | 8 Cyl 5.7L | Step-Van | 350 |
- Throw Out Bearing: GM Short 1.525" Tall
- Throw Out Bearing: GM Short 1.525" Tall
- Product Attributes:
- Bearing Retainer O.D.: 1.375in.
- Spline: 1 1/8in. X 10
- McLeod offers OEM replacement throwout bearings with angular contact, constant running bearings for long life and durabilty. Choose from General Motors, Ford & Chrysler applications. Mcleod also offers an exclusive adjustable height bearing for General Motors & Ford applications. These bearings are adjustable to three different height locations to help maintain proper mechanical linkage geometry.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | Manual | 8 Cyl 5.7L | Step-Van | 350 |
- RST:9.687" Diameter Disc:For use with Large Diameter Flywheel:1-1/8x26
- RST:9.687" Diameter Disc:For use with Large Diameter Flywheel:1-1/8x26
- Product Attributes:
- Pilot Bushing Material: N/a
- Throwout Bearing Style: Standard
- Pressure Plate Style: Diaphragm
- Alignment Tool Included: Yes
- Clutch Patterns 4: 11in. Ford Truck Even Pattern
- Disc Material: Organic
- Pilot Bushing Included: No
- Clutch Patterns 3: 11in.,12in. Borg & Beck
- Clutch Patterns 2: 11.5in.,12in. Ford Long
- Horsepower Rating: 800
- Make: Gm, Ford, Mopar
- OE Flywheel Size: Large
- Hub Style: Solid
- Number of Discs: Double
- Clutch Usage: Street
- Disc Diameter: 9-11/16in.
- Disc Style: Solid Hub
- Spline: 1-1/8 X 26
- Clutch Patterns: 11in. Ford Long
- Throwout Bearing Included: No
- Flywheel Included: No
-
Features:
- McLeod Racing is proud to offer the RST, RXT & RXT 1200 twin disc systems. These units have a soft pedal and the capacity to hold serious power!
- Intended for the high horsepower street fan, the McLeod RST twin disc clutch kit is an economically priced twin disc clutch kit. Able to handle 800hp, this clutch can handle almost any horse-power you can throw at it and still remain street-able. Organic lined clutch discs will provide smooth engagement with a soft pedal effort to make this clutch kit ideal for the street only performance enthusiast. This unit is not intended for competition use! Look to our RXT and RXT 1200 for those applications. This series of clutch comes in 3 different configurations to best suit your needs. Adapter ring version. Another McLeod Racing exclusive. We build a twin disc clutch using a Patented Approved adapter ring to bolt to your supplied flywheel. Complete Unit with Dedicated Flywheel. No need to search for the clutch as one number and the flywheel as another number. McLeod Racing has you covered with one part number and a complete dedicated unit ready to plug and play. You have the choice of running a Billet Steel flywheel for your street applications or a Billet Aluminum flywheel for your track cars.
Additional Fitment Information:
| Vehicle | Block | CC | Transmission | Engine | Sub Model | CID |
|---|---|---|---|---|---|---|
| 1983 - Chevrolet P20 | V | - | Manual | 8 Cyl 5.7L | Step-Van | 350 |
Showing 1 - 10 of 11 products
Loading...