Image
Product
Price
- Jeep Wrangler JL Snorkel, 2018+, Micro-Wrinkle Red
- Borne Off-Road Snorkel for 2018+ Jeep Wrangler JL
- Product Attributes:
- SellingPoint04: Increases Induction Noise
- SellingPoint05: Precision Engineered Rotational-molded Tube Is Durable And Uv Resistant
- SellingPoint06: Includes Durable 2.5mm-thick Steel Brackets
- SellingPoint07: Designed Using The Latest In 3d Printing, Cad Modeling, And Flow Bench Technology
- SellingPoint01: Fits 2018+ Jeep Wrangler Jl
- SellingPoint02: Raises Fresh Air Inlet To Roof Level To Capture Cool And Clean Air On The Trail
- SellingPoint03: Fits With Stock Or Mishimoto Intake
- TechSpec Air Filter Part Number: N/a
- TechSpec Chassis Codes: Jl--jt
- SellingPoint08: Snorkel Inlet Features Drains To Help Prevent Water Intrusion
- SellingPoint09: Removable Inlet Allows Use With Pre-filters
- SellingPoint10: Slotted Bracket Accepts Additional Lighting
- TechSpec Note: Does Not Fit Vehicles Equipped With 3.0l Diesel Engine.----cutting Of The Hood Is Required To Fit This Snorkel.----the Gray Primer Color Is Intended As A Protective Coating Only And Should Be Removed Or Properly Prepped For Further Customization Such As P
- SellingPoint15: N/a
- TechSpec Filter Diameter: N/a
- Install Difficulty: 4
- SellingPoint11: Available With Black, Blue, Red, Or Gray Primer Brackets And Inlet Screen To Match Any Build
- SellingPoint12:
- Mishimoto Lifetime Warranty
- Patent Pending
- TechSpec Engine Codes: 2.0l--3.6l
- SellingPoint13: Mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Caution: This Snorkel Alone Does Not Increase The Vehicle's Water Fording Limit. Fording Water Above The Stock Recommended Limit May Require Modifying Other Components To Avoid Water Damage.
- TechSpec Applications: 2018+ Jeep Wrangler Jl 2.0l--2018+ Jeep Wrangler Jl 3.6l----2020+ Jeep Gladiator Jt 3.6l
- TechSpec Includes: (1) Borne Off-road Snorkel Tube--(1) Borne Off-road Snorkel Inlet--(1) Inlet Screen--(1) Hood Bezel--(1) Intake Duct--(4) Mounting Brackets--(1) Worm Gear Clamp--(1) T-bolt Clamp--(1) Cut Guide--mounting Hardware--mishimoto Lifetime Warranty
-
Features:
- Fits 2018+ Jeep Wrangler JL
- Raises fresh air inlet to roof level to capture cool and clean air on the trail
- Fits with stock or Mishimoto intake
- Increases induction noise
- Precision-engineered rotational-molded tube is durable and UV resistant
- Includes durable 2.5mm-thick steel brackets
- Designed using the latest in 3D printing, CAD modeling, and flow bench technology
- Snorkel inlet features drains to help prevent water intrusion
- Removable inlet allows use with pre-filters
- Slotted bracket accepts additional lighting
- Available with black, blue, red, or gray primer brackets and inlet screen to match any build
- Mishimoto Lifetime Warranty
- Raised intakes, or snorkels, are one of the best modifications you can do for your 2018+ Jeep Wrangler JL if you plan to spend a lot of time off-road.As anybody who’s ever driven on a trail knows, dust and debris are a fact of life off-road. The JL intake has a fresh air duct that pulls outside air from the passenger fender area. But when the vehicle in front of you is kicking up dust, or you’re fording three feet of water, that air isn’t very fresh. Heavy dust often stays low to the ground, about where the stock fresh air inlet lives, but Borne Off-Road has a solution to get fresh air into your intake.This Borne Off-Road 2018+ Jeep Wrangler JL Snorkel moves the fresh air inlet over 20 inches above the stock location, allowing the engine to pull in cleaner air. Our precision rotational-molded tube is made from durable, UV-resistant cross-linked polyethylene that can withstand the heat of the sun and any debris the trail can throw at it. The top of our snorkel includes a 6-inch inlet with a steel mesh cover to protect the intake from large debris. This inlet can also be swapped for a pre-filter to help keep your main intake filter clean.Our snorkel mounts to the JL’s body with sturdy 2.5mm-thick steel brackets and mates directly to the stock lower airbox, making it perfect for use with the Mishimoto JL intake. The brackets and inlet screen are powder coated for maximum durability and are available in micro-wrinkle black, micro-wrinkle blue, or micro-wrinkle red. We also offer the brackets and screen in a gray primer that can be easily customized to suit any build. Like all Mishimoto and Borne Off-Road Wrangler products, this 2018+ Jeep Wrangler JL Snorkel is backed by our Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle |
|---|
| 2020 - Jeep Gladiator |
- Jeep Wrangler JL Snorkel, 2018+, Micro-Wrinkle Red
- Borne Off-Road Snorkel for 2018+ Jeep Wrangler JL
- Product Attributes:
- SellingPoint04: Increases Induction Noise
- SellingPoint05: Precision Engineered Rotational-molded Tube Is Durable And Uv Resistant
- SellingPoint06: Includes Durable 2.5mm-thick Steel Brackets
- SellingPoint07: Designed Using The Latest In 3d Printing, Cad Modeling, And Flow Bench Technology
- SellingPoint01: Fits 2018+ Jeep Wrangler Jl
- SellingPoint02: Raises Fresh Air Inlet To Roof Level To Capture Cool And Clean Air On The Trail
- SellingPoint03: Fits With Stock Or Mishimoto Intake
- TechSpec Air Filter Part Number: N/a
- TechSpec Chassis Codes: Jl--jt
- SellingPoint08: Snorkel Inlet Features Drains To Help Prevent Water Intrusion
- SellingPoint09: Removable Inlet Allows Use With Pre-filters
- SellingPoint10: Slotted Bracket Accepts Additional Lighting
- TechSpec Note: Does Not Fit Vehicles Equipped With 3.0l Diesel Engine.----cutting Of The Hood Is Required To Fit This Snorkel.----the Gray Primer Color Is Intended As A Protective Coating Only And Should Be Removed Or Properly Prepped For Further Customization Such As P
- SellingPoint15: N/a
- TechSpec Filter Diameter: N/a
- Install Difficulty: 4
- SellingPoint11: Available With Black, Blue, Red, Or Gray Primer Brackets And Inlet Screen To Match Any Build
- SellingPoint12:
- Mishimoto Lifetime Warranty
- Patent Pending
- TechSpec Engine Codes: 2.0l--3.6l
- SellingPoint13: Mishimoto Lifetime Warranty
- SellingPoint14: N/a
- TechSpec Caution: This Snorkel Alone Does Not Increase The Vehicle's Water Fording Limit. Fording Water Above The Stock Recommended Limit May Require Modifying Other Components To Avoid Water Damage.
- TechSpec Applications: 2018+ Jeep Wrangler Jl 2.0l--2018+ Jeep Wrangler Jl 3.6l----2020+ Jeep Gladiator Jt 3.6l
- TechSpec Includes: (1) Borne Off-road Snorkel Tube--(1) Borne Off-road Snorkel Inlet--(1) Inlet Screen--(1) Hood Bezel--(1) Intake Duct--(4) Mounting Brackets--(1) Worm Gear Clamp--(1) T-bolt Clamp--(1) Cut Guide--mounting Hardware--mishimoto Lifetime Warranty
-
Features:
- Fits 2018+ Jeep Wrangler JL
- Raises fresh air inlet to roof level to capture cool and clean air on the trail
- Fits with stock or Mishimoto intake
- Increases induction noise
- Precision-engineered rotational-molded tube is durable and UV resistant
- Includes durable 2.5mm-thick steel brackets
- Designed using the latest in 3D printing, CAD modeling, and flow bench technology
- Snorkel inlet features drains to help prevent water intrusion
- Removable inlet allows use with pre-filters
- Slotted bracket accepts additional lighting
- Available with black, blue, red, or gray primer brackets and inlet screen to match any build
- Mishimoto Lifetime Warranty
- Raised intakes, or snorkels, are one of the best modifications you can do for your 2018+ Jeep Wrangler JL if you plan to spend a lot of time off-road.As anybody who’s ever driven on a trail knows, dust and debris are a fact of life off-road. The JL intake has a fresh air duct that pulls outside air from the passenger fender area. But when the vehicle in front of you is kicking up dust, or you’re fording three feet of water, that air isn’t very fresh. Heavy dust often stays low to the ground, about where the stock fresh air inlet lives, but Borne Off-Road has a solution to get fresh air into your intake.This Borne Off-Road 2018+ Jeep Wrangler JL Snorkel moves the fresh air inlet over 20 inches above the stock location, allowing the engine to pull in cleaner air. Our precision rotational-molded tube is made from durable, UV-resistant cross-linked polyethylene that can withstand the heat of the sun and any debris the trail can throw at it. The top of our snorkel includes a 6-inch inlet with a steel mesh cover to protect the intake from large debris. This inlet can also be swapped for a pre-filter to help keep your main intake filter clean.Our snorkel mounts to the JL’s body with sturdy 2.5mm-thick steel brackets and mates directly to the stock lower airbox, making it perfect for use with the Mishimoto JL intake. The brackets and inlet screen are powder coated for maximum durability and are available in micro-wrinkle black, micro-wrinkle blue, or micro-wrinkle red. We also offer the brackets and screen in a gray primer that can be easily customized to suit any build. Like all Mishimoto and Borne Off-Road Wrangler products, this 2018+ Jeep Wrangler JL Snorkel is backed by our Mishimoto Lifetime Warranty.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2020 - Jeep Gladiator | Sport S |
- Aluminum Oil Filter Housing Kit, Fits 3.6L/3.2L Pentastar 2011-2017
- Aluminum Oil Filter Housing Kit, Fits 3.6L/3.2L Pentastar 2011-2017
- Product Attributes:
- SellingPoint04: Helps Prevent Hard-to-diagnose And Potentially Costly Oil Leaks
- SellingPoint05: Includes New, Pre-installed Oil Pressure And Temperature Sensors
- SellingPoint06: Upgraded Viton Seals Resist Fuel And Oil For Extended Service Life
- TechSpec Overall Length (in): 15
- SellingPoint07: Mishimoto Lifetime Warranty
- SellingPoint01: Fits 3.6l/3.2l Pentastar Engines Found In Many Jeep, Chrysler, And Dodge/ram Vehicles
- SellingPoint02: All-aluminum Housing Won't Crack Or Split Like Stock Plastic
- SellingPoint03: Includes New Oil Filter, Filter Cap, Intake Manifold Gaskets, Oil Seals, And Bolts For A One-stop Solution
- TechSpec Chassis Codes: N/a
- SellingPoint08: N/a
- SellingPoint09: N/a
- TechSpec Outlet: N/a
- TechSpec Core Height (in): 2.32
- TechSpec Core Thickness (in): 2.02
- Installation Difficulty: 3
- SellingPoint10: N/a
- TechSpec Note: Replaces Oe Part Numbers: 5184294ac, 5184294ad, 5184294ae, 5184304ae, 5184304af, 68105583aa, 68105583ab, 68105583ac, 68105583ad, 68105583ae, 68105583af, 68105583ag, 68308741aa, 68308741ab, 68308741ac, 68308741af, 68310865aa, 68310865ab, 68310865ac, 683108
- TechSpec Installation Notes: N/a
- SellingPoint15: N/a
- SellingPoint11: N/a
- SellingPoint12: N/a
- TechSpec Engine Codes: Pentastar
- SellingPoint13: N/a
- SellingPoint14: N/a
- TechSpec Core Length (in): 5.3
- TechSpec Fluid Capacity (qts): N/a
- TechSpec Caution: To Avoid Damage, This Vehicle Must Use A Filter For 2014+ Vehicles. Oem Part Number 68191349ac Or Equivalent.
- TechSpec Applications: 2011-2017 Chrysler 200 3.6l V6--2011-2017 Chrysler 300 3.6l V6--2014-2016 Chrysler Town & Country 3.6l V6--2011-2014 Dodge Avenger 3.6l V6--2011-2017 Dodge Challenger 3.6l V6--2011-2017 Dodge Charger 3.6l V6--2011-2015 Dodge Durango 3.6l V6--2011-2017 Dod
- TechSpec Includes: (1) Oil Filter Housing--(1) Heat Exchanger--(1) Oil Filter Cap--(1) Oil Filter--(1) Oil Temperature Sensor--(1) Oil Pressure Sensor--(6) Gaskets--(1) Hardware Pack--mishimoto Lifetime Warranty
- TechSpec Inlet: N/a
- TechSpec Core Construction: Stacked Plate
- TechSpec Overall Width (in): 4
- but they're not without their flaws.----The stock 3.6 oil filter housing is made from plastic and is known to become brittle after repeated heat cycles. When that happens, even the slightest amount of torque on the filter cap while performing an oil change can be enough to crack the housing and cause significant oil leaks. To make matters worse, the oil filter housing lives underneath the intake manifold, making it difficult to identify and diagnose the leak. Oil running down the back of the engine can look like a failed rear-main seal and end up costing you thousands in parts and labor, only to have the problem continue. Luckily, Mishimoto offers a solution to prevent the headache of chasing down oil leaks and give you peace of mind.----Our all-aluminum 3.6/3.2L Pentastar oil filter housing kit is a complete safeguard against frustrating oil leaks. As the name suggests, our oil filter housing swaps the stock brittle plastic for a robust aluminum replacement. This housing is significantly stronger than the stock polymer version and won't become brittle over time. We've also upgraded the seals to Viton for improved oil and fuel resistance, ensuring a long service life. This complete kit includes the aluminum housing, oil filter, filter cap, intake manifold gaskets, filter housing seals, heat exchanger, oil temp and pressure sensors, and bolts, making it a one-stop solution for your Pentastar. Like all Mishimoto products, this 3.6L/3.2L Pentastar aluminum oil filter housing kit is backed by our Mishimoto Lifetime Warranty, for a lifetime of leak-free reliability.
This Part Fits the Following OEM/Substitute Numbers:
5184294AC, 5184294AD, 5184294AE, 5184304AE, 5184304AF, 68105583AA, 68105583AB, 68105583AC, 68105583AD, 68105583AE, 68105583AF, 68105583AG, 68308741AA, 68308741AB, 68308741AC, 68308741AF, 68310865AA, 68310865AB...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | Engine Version | CID |
|---|---|---|---|---|---|---|
| 2020 - Jeep Gladiator | V | 3604 | 6 Cyl 3.6L | Mojave | Pentastar | 220 |
Showing 1 - 3 of 3 products
Loading...