Image
Product
Price
- Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES800086 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.75
- Dust Boot Included: Yes
- End 2 Thread Diameter: 12.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 14.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 5.370
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15267583, 15944090, 22687089, 269-3396, 401-2059B, 4012059, 45A1059, 46A1059A, 531-225, 612.62048, 61362048, ES4258, ES800086, JTE1264, MES800086, TO90365
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Pontiac G6 | Outer |
- Tie Rod End
- MOOG ES800086 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.75
- Dust Boot Included: Yes
- End 2 Thread Diameter: 12.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 14.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 5.370
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Pontiac G6 | Outer |
- Stabilizer Bar Link
- 11.8 (in) Center to Center
- MOOG K80252 Stabilizer Bar Link
- Product Attributes:
- Bolt Length:
- 11.881
- 300.0
- Greaseable: Yes
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Pontiac G6 | Front |
- Stabilizer Bar Link
- 11.8 (in) Center to Center Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K80252 Stabilizer Bar Link
- Product Attributes:
- Bolt Length:
- 11.881
- 300.0
- Greaseable: Yes
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15782690, 1880252, 20784686, 22608427, 22670300, 22710286, 227610286, 25846008, 265-1633, 45G0424, 46G0424A, 531-215, 545-1424B, 5451424, 606.62014, 60762014, JTS664, K80252...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Pontiac G6 | Front |
- Coil Spring Set
- Variable Rate
- MOOG CC81365 Coil Spring Set
- Product Attributes:
- Wire Diameter: 0.515
- Rear Spring Compressed Length: 3.483
- Free Height - Inches: 13
- End Type 2: Pigtail
- End Type 1: Pigtail
- Spring Color: Black
- Bar Diameter - Inches: 0.515
- Front Spring Compressed Length: 3.483
- Front Spring Outside Diameter: 5.340
- Installation Height - Inches: 3.483
- Rear Spring Outside Diameter: 5.340
- Spring Type: Variable Rate
-
Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
15829443, 2773620, 45H1156, 591-1156, CC81365, JCS1631T, RCS19209V, SMS81365V
Additional Fitment Information:
| Vehicle | Block | CC | Position | Doors | Engine | Body | CID |
|---|---|---|---|---|---|---|---|
| 2006 - Pontiac G6 | V | 3880 | Rear | 2 | 6 Cyl 3.9L | Coupe | 237 |
- Control Arm and Ball Joint Assembly
- Kit Contains FRONT BUSHING; Use to depletion, then use CK621201; Problem Solver - Powdered Metal Gusher Bearing For Better Lubrication
- MOOG CK620179 Control Arm and Ball Joint Assembly
- MOOG Chassis Suspension Control Arm and Ball Joint Assembly
- MOOG High Utilization Designs are designed for heavier loads and more punishing roads when extra strength, durability and confidence is required.
This Part Fits the Following OEM/Substitute Numbers:
15292911, 22730775, 22730777, 260-5874, 507-1393, 520-163, 8896675, CB90203, CMS50122, JTC1536, MS50122
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Pontiac G6 | Front Left Lower |
- Control Arm and Ball Joint Assembly
- Kit Contains FRONT BUSHING Premium OE Replacement
- MOOG RK620180 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Pinch
- Control Arm Maximum Length: 11.850
- Grease Fitting Included: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Gray
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Aluminum
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
10379342, 15292910, 22730776, 260-5873, 260-5874, 501-1394, 507-1394, 520-164, 88966974, CB90204, CMS50123, FA4868, FCA1151, JTC1541, MS50123
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Pontiac G6 | Front Right Lower |
- Camber Adjusting Kit
- From Minus 1-3/4 to Plus 1-3/4 Degrees of Change Single Offset Adjuster with 12 (mm) Bolts
- MOOG K90473 Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
13321A, 264-3641, 41212, 413541, 45K18031, 45K18035, 616-1035, 6161031, 770500, AA3641, K90473, MS90002, VV13321A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Pontiac G6 | Front |
- Tie Rod End
- Includes A Full Ball Stud To Provide 360 Degrees Of Smooth Rotational Movement
- MOOG EV80988 Tie Rod End
- Product Attributes:
- End 2 Gender: Female
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
15944072, 15944097, 19256420, 20995477, 22687091, 269-3505, 401-2168, 401-2168B, 45A1168, 46A1168A, 531-326, 612.62049, 61362049, ES4394, ES80988, EV80988, JAR1130, MEV80988...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Pontiac G6 | Inner |
- Tie Rod End
- MOOG EV80988 Tie Rod End
- Product Attributes:
- End 2 Gender: Female
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Wrench flats on housing and stud provide easy installation and alignment adjustment
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2006 - Pontiac G6 | Inner |
Showing 1 - 10 of 32 products
Loading...