Shop By Product Matching "Moog"
Choose your Submodel for your 2011 Nissan Pathfinder
Image
Product
Price
- Ball Joint
- Both New and Original Designs can be Installed on Vehicle
- MOOG K80647 Ball Joint
- Product Attributes:
- Adjustable: No
- Maximum Outside Diameter: 2.380
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Pathfinder | Front Lower |
- Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation Both New and Original Designs can be Installed on Vehicle
- MOOG K80647 Ball Joint
- Product Attributes:
- Adjustable: No
- Maximum Outside Diameter: 2.380
- Mounting Hole Quantity: 0
- Castle Nut Included: No
- Mounting Type: Press-in
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10480647, 260-1734, 45D2423, 46D2423A, 505-1426, 505-1426B, 531-348, 54500-7S001, 54500-ZR00A, 545009CD0A, 54500EA000, 54500EA00A, 54501-7S001, 54501-ZR00A, 54501EA00A, 54501ES00A, 610.42017, 61142017...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Pathfinder | Front Lower |
- Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES800108 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 7.210
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
101-5763, 269-3445, 4012108, 4012108B, 45A1108, 46A1108A, 48640EA025, 531-039, 612.42066, ES4320, ES800108, JTE1431, MS30608, TO69072
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Pathfinder | Right Outer |
- Tie Rod End
- MOOG ES800108 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 7.210
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Pathfinder | Right Outer |
- Greaseable Super Strength Universal Joint
- with Lube Fitting in Body Greasable Super Strength U-Joint with Lube Fitting in Body
- MOOG Greaseable Super Strength 280 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: Yes
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lube Fitting Location: Flush-type Lube Fitting In Bearing
- Lubricateable: Yes
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- GREASABLE DESIGN -- Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
2154153, 45U0111
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Nissan Pathfinder | Front Driveshaft at Front Axle | 4WD |
- Non-Greaseable Super Strength Universal Joint
- with Lube Fitting in Body Non-Greasable Super Strength U-Joint
- MOOG Non-Greaseable Super Strength 269 U-joint
- Product Attributes:
- Bearing Cap Type: 4 Round Plain Bearings
- Bearing Cap Axis 2 Diameter:
- 1.063
- 27.0
- Bearing Diameter A - mm: 27.0
- Length Axis 1:
- 3.22
- 81.7
- Length Axis 2:
- 3.22
- 81.7
- Length A - Inch: 3.22
- OE Series: Spicer 1310
- Length A - mm: 81.7
- Bearing Diameter A - Inch: 1.063
- Bearing Type B: Round Plain
- Bearing Cap Axis 1 Diameter:
- 1.063
- 27.0
- Bearing Diameter B - Inch: 1.063
- Bearing Type A: Round Plain
- Greaseable: No
- U-Joint Identification: 4 Round Plain Bearings
- Image: Ujoint_4plain.tif
- Length B - Inch: 3.22
- Length B - mm: 81.7
- Length Measurement B: Outside Of Bearing To Outside Of Bearing
- Bearing Diameter B - mm: 27.0
- Lubricateable: No
- Length Measurement A: Outside Of Bearing To Outside Of Bearing
-
Features:
- BUILT TO LAST -- Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- CORROSION PROTECTION -- Exclusive MICRO SHIELDâ„¢ coating protects against rust and corrosion
- KEEPS DIRT OUT -- Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE -- Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
1-0153BF, 10153G, 20049P, 45U0145, 5-529X, 529, DT467, G5-467X, U153HP
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2011 - Nissan Pathfinder | Front Driveshaft at Front Axle | 4WD |
- Control Arm and Ball Joint Assembly
- Premium OE Replacement
- MOOG RK620371 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Pinch
- Control Arm Maximum Length: 18.700
- Grease Fitting Included: No
- Adjustable: No
- Mounting Hardware Included: Yes
- Pre-Greased: Yes
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Stamped Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
102-6320, 260-5933, 2606349, 45D3584, 5071540, 5071821, 521-532, 545009CD0A, 54500EA000, 54500EA00A, 622.42059, CB69054, CMS30125, FA3343, FA3759, MS30125
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Pathfinder | Front Right Lower |
- Caster/Camber Adjusting Kit
- Camber / Caster Plus or Minus 2 Degrees Non-Greasable
- MOOG K80276 Caster/Camber Adjusting Kit
-
Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1380276A, 264-3699, 448202, 45K0192, 545511, 6111192, AA3699, MK80276, MS30007, VV80276A
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Pathfinder | Front |
- Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES800048 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 7.210
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
101-5764, 269-3444, 4012107, 4012107B, 45A1107, 46A1107A, 48520EA025, 531-040, 612.42065, ES4319, ES800048, JTE1415, MS30607, TO69071
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Pathfinder | Left Outer |
- Tie Rod End
- MOOG ES800048 Tie Rod End
- Product Attributes:
- End 2 Thread Pitch: 1.5
- Dust Boot Included: Yes
- End 2 Thread Diameter: 14.0
- End 1 Thread Direction: Clockwise
- End 1 Gender: Female
- Greaseable: Yes
- End 1 Thread Diameter: 16.0
- End 1 Thread Pitch: 1.5
- End 2 Gender: Female
- Length - Stud Center to End: 7.210
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2011 - Nissan Pathfinder | Left Outer |
Showing 1 - 10 of 45 products
Loading...