Image
Product
Price
- Prestone Amam Gen 2 50/50 6/1 GAL
- Extended Life 50/50, Ready to Use Prediluted
- Product Attributes:
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: No Dilution Required
- Phosphate Free: Yes
- Boiling Point at 50 50 Mixture: 229
- for corrosion protection for cars and light duty trucks. Top-off a vehicle’s cooling system with Prestone 50/50, which is a blend of concentrated antifreeze/coolant and demineralized water.
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Nissan Cabstar |
- Prestone All Vehicles - 10yr/300k mi- Antifreeze+Coolant (1 Gal - Concentrate)
- Extended Life, Full Strength Concentrate
- Product Attributes:
- Biodegradable: No
- California Proposition 65: Warning: Reproductive Harm - Www.p65warnings.ca.gov
- Freezing Point: -34
- Recommended Dilution Ratio: 5 To 7
- Phosphate Free: Yes
- Ethylene Glycol: Yes
- Boiling Point at 50 50 Mixture: 229
- Prestone All Vehicles antifreeze+coolant - Concentrate is our optimized formula for All Vehicles; makes, models, years & fluid colors. Our Patented Cor-Guard® Technology (our best coolant innovation in decades) works with all new engines, and also is backward compatible - providing instant protection in older engines. Not only does Prestone Coolant Technology manage engine temperature all year round and protects against freezing, it also uniquely protects the engine from serious damage. No matter what type of coolant is currently in your engine, a Single Top-off of Patented Cor-Guard® Technology instantly protects parts better from corrosion, buildup, pitting, scaling, rust and other damage; a complete replacement of all coolant protects to the maximum. Internal engine damage can cause parts failure, resulting in expensive auto repair shop bills and downtime inconveniences. Using Prestone Antifreeze+Coolant protects against engine issues and those inconveniences. This patented fluid is designed to last 10yrs / 300,000 miles and will protect the internal parts of the engine for 10yrs / 300,000 miles
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Nissan Cabstar |
- Safety Lever Radiator Cap
- Relief pressure 13 lb
- Safety Lever
- Product Attributes:
- Valve OD: 1.14 In
- Cap Depth: 1.32
- Lever Type:
- Safety Lever
- Yes
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: Yes
- Safely remove your radiator cap by venting the pressure from the cooling system before removing the cap. Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10327, 12R6S, 17237, 7913, 9ST13R, P7913, ST13R
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Nissan Cabstar | L | 2488 | 4 Cyl 2.5L | 152 |
- Fail-Safe Thermostat-180 Degrees
- "The patented Fail-Safe (R) thermostat is the only thermostat on the market designed to lock in the open position, allowing coolant to continue to flow in the event of overheating." Temperature 180F OEM Recommended Temp
- Fail-Safe
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.51
- Flange Thickness: 0.068 In
- Bypass Diameter: 1.18 In
- Jiggle Pin Weep Hole: No
- Bypass Length: 1.66 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
1601-291006, 7302-180, 73028, 97302180, NI, P7302-180, SS180-2037
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Nissan Cabstar | L | 2488 | 4 Cyl 2.5L | 152 |
- W/A.C.
- Premium OE Micro-V Belt
- Product Attributes:
- Top Width:
- .947
- 24
- Outside Circumference:
- 1767
- 69.5
- OE Comparison Rating: Oe Performance
- Washer Pump Included: Epdm
- Cross Section Designation: K
- Effective Length:
- 1753
- 69.01
- Rib Quantity: 7
- Cord Material: Polyester
- Top Width:
This Part Fits the Following OEM/Substitute Numbers:
117205X00A, 25-070690, 38920RBBE01, 38920RBBE02, 38920RBBE03, 4070689, 4070690, 5070690, 5070690DR, 689K7MK, 690K7, 690K7MK, 7K1749, 7K690, 7K690AP, 7PK1749, 7PK1750, 7PK1751...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 2012 - Nissan Cabstar | L | 2488 | Alternator | DIESEL | 4 Cyl 2.5L | 152 |
- WIX Spin-On Lube Filter
- Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- California Proposition 65: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Inner Diameter Top: Closed
- Outer Diameter Top: 3.661
- Duty Type: Ld
- Micron: 21.00
- Flow Rate: 7-9 Gpm
- Style: Spin-on Lube Filter
- Class: A
- Burst Pressure: 325
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Media Material: Enhanced Cellulose
- Anti-Drain Back Valve: Yes
- WIX Oil Filters provide excellent engine protection using conventional, synthetic, or synthetic-blended motor oils, as recommended by the OE vehicle manufacturer, for normal and severe driving conditions such as stop and go traffic, dirt roads, construction sites, short trips, and interstate travel. WIX filters are recommended for OEM oil and filter change intervals, typically 3,750 to 10,000 miles, not to exceed 12 months. This filter traps up to 50% more dirt and contaminants than Protec with the best combination of capacity & efficiency for severe conditions. When applicable, WIX flexible silicone anti-drainback valve protects against dry engine starts past the traditional filter change interval. Laboratory Test Performance per ISO 454812 18 grams dirt (WIX 51515), 99% efficient at 23 microns (Based on WIX 51515, WIX 51356, WIX 57060)
This Part Fits the Following OEM/Substitute Numbers:
0 451 001 149, 0 451 001 149-30N, 0 451 103 001, 0 451 103 002, 0 451 103 003, 0 451 103 008, 0 451 103 009, 0 451 103 012, 0 451 103 022, 0 451 103 029, 0 451 103 029-310, 0 451 103 044, 0 451 103 084, 0 451 103 167, 0 451 103 903, 0 451 104 514, 0 451 203 058, 0 986 452 005...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2012 - Nissan Cabstar | L | 2488 | Mexico | 4 Cyl 2.5L | 152 |
- PEAK OET Asian Extended Life Blue 50/50 Pre-diluted; 1 Gallon
- This item must be purchased in quantities of 6
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Nissan Cabstar |
- Power Steering Oil Cooler
- Power Steering Oil Cooler
- Pwr Strg Oil Cooler
- Product Attributes:
- Depth IN: 0.750
- Height IN: 2.500
- Outlet Size IN: 0.375
- Connector Fitting: 3/8
- Fittings Included?: Included
- Hose Length FT: 4.500
- Length IN: 9.000
- Gasket / Seals?: Not Included
- Mounting Hardware?: Included
- Description: Power Steering Oil Cooler
- Hose Size Number: 11/32
- Contains Spring?: Not Included
- Row Quantity: 2
- With Electric Fan?: Not Included
- O.E. Replacement?: No
- Bracket?: Not Included
This Part Fits the Following OEM/Substitute Numbers:
1009, 11153019, 13213, 14866, 1534157, 212, 241009, 53019, 6919, 77430, 911009, CWK911009
Additional Fitment Information:
| Vehicle |
|---|
| 2012 - Nissan Cabstar |
- Radiator cap
- Relief pressure 13 lb
- Standard
- Product Attributes:
- Cap Depth: 0.97
- Lever Type:
- No
- Standard
- Coolant Recovery System: Open & Closed System
- Quick Pressure Release: No
- Manufactured to meet all OEM specifications. Designed to be easy to install and remove. Manufactured from high quality components with proper relief and vacuum valves. Quality tested to stand up to even the most demanding automotive cooling systems.
This Part Fits the Following OEM/Substitute Numbers:
10227, 10227ST, 12R6, 1678-20166, 17137, 19317447, 214307999C, 21430F430A, 2533005000, 52467188, 7513, 7513-RC, 94842508, 94847233, 94854943, 96051840, 96051843, 96060164...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Nissan Cabstar | L | 2488 | 4 Cyl 2.5L | 152 |
- Thermostat-180 Degrees
- Temperature 180F OEM Recommended Temp
- Standard
- Product Attributes:
- Installation Tool Included: No
- Sealing Flange Outside Diameter: 2.51
- Flange Thickness: 0.05 In
- Bypass Diameter: 1.18 In
- Jiggle Pin Weep Hole: Yes
- Bypass Length: 1.66 In
- Temperature (Degree): 180
- Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable
This Part Fits the Following OEM/Substitute Numbers:
12T40D, 14128, 1601-290219, 165, 19300PR7A02, 19300PV1003, 19300PV1013, 19301PV1Y00, 19301R8AA00, 212001LA0A, 212001LA1A, 21200AD201, 302-180, 30280, 30720083, 307200832, 33878, 35128...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2012 - Nissan Cabstar | L | 2488 | 4 Cyl 2.5L | 152 |
Showing 1 - 10 of 11 products
Loading...