Shop By Product Matching "Nissan"
Choose your Submodel for your 2023 Nissan TITAN XD
Image
Product
Price
- BEDRUG 04+NISSAN TITAN KING CAB 6.5ft.
- 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate
- BedRug Complete Truck Bed Liner; 3/4 in. Thick Floor; 1/4 in. Thick Side Walls; Includes Bulkhead And Tailgate;
- BedRug® Complete Truck Bed Liner
- Product Attributes:
- Instructions Included: Yes
- Surface Preparation Required: Yes
- Estimated Install Time (Hour): 0.20 - 0.50
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Configuration: Multi Piece
- Length: 68.000 In.
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Style: Custom Fit
- Width: 15.000 In.
- Mounting: Under Bed Rail And Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Polypropylene/ultra Tough Work Surface
- Bleach/battery Acid/oil And Gas Wash Right Off
- Custom Fit For Each Truck/wont Scratch Truck Bed
- Designed For Exterior Use/will Not Absorb Water
- Installs In Minutes With Hook And Loop Fastener
- Limited Lifetime Warranty
- Looks And Feels Like Carpet
- Slip And Skid Resistant Fiber Surface
- Bottom Configuration: Ribbed
- Shifter Handle Included: Includes Tailgate Mat
- Paintable: No
- Tailgate Cover Included: Yes
- Chemical Resistance: Yes
- Drilling Required: No
- Kit Contents: Full Truck Bed Liner & Built In Tailgate Mat
- Install Method: No Drill; Hook And Loop
- Item Height: 15.000 In.
-
Features:
- If Installing A Bedrug Over A Spray-In Bedliner
- Supplemental Installation Kit -Brzsprayon- Is Required
- Made of 100 percent polypropylene, the BedRug bed liner protects your truck, and provides an ultra tough work surface. BedRug is water and stain resistant. Holds up to beach, oil, and even battery acid!
Additional Fitment Information:
| Vehicle | Bed | Bed Length |
|---|---|---|
| 2023 - Nissan TITAN XD | Fleetside | 78.7 |
- Nissan; Suzuki; Toyota Truck Tool Box
- L 66 in. x W 19.25 in. x H 13.5 in.; Silver
- UWS TBS-66 Crossover Tool Box (66 Inch Truck Tool Box-Bright Aluminum)
- Single Lid Series Tool Box
- Product Attributes:
- Tariff 301: No
- WARNING CA Proposition 65: Yes
- Lid Type: Single
- WARNING CA Proposition 65 Message: Warning: This Product Can Expose You To Chemicals Including Lead; Which Is Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information Go To Www.p65warnings.ca.gov.
- Style: Cross Over Rail Standard Profile
- Sales Group Description: Crossover Toolbox
- Latch Type: Paddle Handles
- Sales Family Description: Work Boxes
- Profile: Standard
- Tub Style: Standard
- Rails Included: No
- Opening Type: Single Lid
-
Features:
- RigidCore Foam Filled Lid To Maximize Power And Prevent Binding
- 0.058 in. Extra Thick / One Piece Aluminum Tub Holds Heavy Tools
- Stainless Steel Lock Handles For Corrosion Resistant Operation
- Connects Rod Allows For Convenient Operation From Driver Side
- Interior Rod Enclosure Prevent Bending Or Jamming Of Lock System
- Widespread Handles Are Easy To Reach From Either Side Of Truck
- MicroSeal Gasket Helps Seal Out Moisture / Dust And Dirt
- Lids Self Open For Convenient Operation And Loading
- Tool Trays And Built In Screwdriver Holders For Easy Organization
- Three Compartment Sliding Tray For Convenient Small Item Storage
- Multiple Box Sizes Available For Custom Fit On Each Truck Vehicle
- Includes Box And Mounting Hardware
- UWS crossover truck tool boxes are the tried-and-true way of keeping your tools organized, on-hand and fully secure no matter where you and your truck roam. Each UWS tool box is built from extra-thick aluminum welded into a single-piece tub. This provides the tool box with reliable strength and helps keep the interior sealed off from the elements. Aluminum construction also makes the box highly resistant to corrosion for long-lasting use. To add even more strength to the crossover truck tool box, the lid features our RigidCore foam-filled design. Layered between two sheets of aluminum, this core greatly increases the structural integrity of the lid to prevent bending and warping and to ensure smooth opening and closing. The lid is able to open to a full 90 degrees, providing better access to tools, equipment and other stored items. It also features self-opening struts to make it easy to open the box when your hands are full. To keep out moisture, dirt and even insects, the lid is also fitted with a MicroSeal gasket that seals off the inside of the tool box from the outside elements. UWS crossover truck tool boxes make it easy to keep your tools and other items organized, featuring built-in screwdriver holders and a three-compartment sliding tool tray. The tool box itself is easy to install and is available in multiple sizes to provide the perfect for your truck and lifestyle. Like all UWS products, each crossover truck tool box is proudly assembled right here in the USA for style and long-lasting dependability.
Additional Fitment Information:
| Vehicle | Bed |
|---|---|
| 2023 - Nissan TITAN XD | Fleetside |
- OEM Puck System Gooseneck Safety Chain Anchors; Chevy; Ford; GMC; Nissan (38K)
- OEM Compatible Gooseneck For GM w/5th Wheel Prep Package
- CURT 60691 OEM Puck System Gooseneck Safety Chain Anchors; 30K; Fits Select Silverado; Sierra 2500; 3500 HD; F-250; F-350; Nissan Titan XD
- Safety Chain Anchors
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Fits The Chevy Ford Gm. Or Nissan Titan Xd Puck System
- Provides Reliable Connection For Gooseneck Trailer Safety Chains
- Simple Drop-In Installation Eliminates The Need For Tools
- Wide Openings Accept Large Safety Chain Clevis Hooks
- Constructed From Heavy-Duty Forged Steel
- Protected By A Highly Durable Carbide Black Powder Coat Finish
- Patent Pending
- Outfitting your pickup to tow a heavy-duty flatbed or livestock trailer is easy with CURT OEM puck system gooseneck safety chain anchors. Like our OEM puck system gooseneck balls, these safety chain anchors utilize the puck system built into certain pickup trucks today with the towing prep package. They feature a patented installation system, easily dropping into the truck bed pucks without any tools required. They feature heavy-duty forged steel construction with a durable carbide black powder coat finish, and they offer large safety chain loops to accept heavy-duty hooks. These particular OEM puck system gooseneck safety chain anchors are compatible with the puck system of select model years of the Chevrolet Silverado 2500 HD and 3500 HD, Ford F-250 and F-350 Super Duty, GMC Sierra 2500 HD and 3500 HD and Nissan Titan XD (see application info to verify fitment). The anchors can be purchased as a standalone item or as part of a complete kit (#60692) that also includes the OEM puck system gooseneck ball, a rubber hole cover and a durable storage case.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Nissan TITAN XD |
- 3in. Round Black Steel Side Bars; Select Nissan Titan; XD
- Includes Side Bars And Mounting Hardware; Carbon Steel; Semi-Gloss Black
- ARIES 209042 3-Inch Round Black Steel Nerf Bars; No-Drill; Fits Select Nissan Titan; XD
- Aries 3 in. Round Side Bars
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Tube Shape: Round
-
Features:
- Unique Bends To Contour To The Body of The Vehicle
- Custom/ Non-Skid Step Pads For Safe Entry And Exit
- 3 in. Diameter/ Heavy-Wall Tube Design
- High-Strength Carbon Steel Construction
- Rust-Resistant Semi-Gloss Black Powder Coat And E-Coat Finish
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets For Solid Step
- Includes One Pair Of Side Bars And Mounting Hardware
- ARIES 3 in. side bars are more than a fancy decal for your truck, Jeep or SUV. They are a confident first step on each new adventure. These 3 in. nerf bars are constructed from strong carbon steel for superior rigidity, and they feature a sleek semi-gloss black powder coat finish. For an added edge, each nerf bar also goes through an E-coat process, before receiving its black powder coat, to strengthen and protect the final finish against peeling, chipping and scratching. ARIES 3 in. round side bars are also available in polished stainless steel or semi-gloss black powder-coated steel. All ARIES 3 in. nerf bars come with heavy-duty steel brackets and non-skid step pads. The mounting brackets are strong and custom-designed for specific makes and models to allow the side bars to contour to the lines of your vehicle. They offer easy installation and the strength necessary to provide sound footing. These particular custom nerf bars fit specific years of the Nissan Titan and Titan XD (see application info to verify fitment). ARIES 3 in. round side bars also come with non-skid step pads made of tough polypropylene. These step pads feature a textured pattern for enhanced safety, and they cover a wide portion of the tubes for a more comfortable step.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Nissan TITAN XD |
- RidgeStep 6-1/2in. x 85in. Black Steel Running Boards; Select Nissan Titan; XD
- Includes RidgeStep Running Boards And VersaTrac Brackets PN[C2885/2055142]; Textured Black Powder Coat; Carbon Steel
- ARIES 2055542 RidgeStep Black Steel 6-1/2 x 85-Inch Truck Running Boards; Select Nissan Titan; XD
- RidgeStep Commercial Running Boards w/Mounting Brackets
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: No
-
Features:
- High-Strength/ All-Steel Construction w/No Plastic Parts
- Angular Design For Tough/No-Nonsense Look On Hardworking Trucks
- Stamped Steel Treads For Non-Skid Step Will Never Wear Or Crack
- Flat Profile And 6-1/2 in. Width Provide Comfortable Step
- Textured Black Powder Coat Easily Hides Minor Scratches And Grime
- Dual-Layer E-Coat And Powder Coat Finish For Corrosion Resistance
- Welded Steel End Caps For Durable Accent
- Mounting System For Easy Installation And Vehicle Customization
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty/ Powder-Coated Steel Mounting Brackets For Solid Step
- Includes Running Boards PN C2885 And Brackets PN 2055142
- Powerful, definitive and uncompromising as a mountain ridge, ARIES RidgeStep running boards are made for those who gets it done, day after day. With their solid, all-steel construction, non-skid treads and tough powder coat finish, RidgeStep running boards are made to finish the job. Installation of these running boards is easy and secure because they use the ARIES VersaTrac mounting system. The underside of each board is equipped with a channel that accepts a set of heavy-duty bracket inserts. The inserts move along the channel to fit your truck, and the mounting hardware provides a secure attachment. These running boards are designed to fit specific years of the Nissan Titan and Titan XD (NOTE: This set of running boards includes vehicle-specific VersaTrac mounting brackets. See the application information to verify compatibility with your vehicle). ARIES RidgeStep running boards are not only made for easier installation, but they are also built to face the harsh elements of the commercial job. They feature high-strength, solid steel construction for a step that can keep up with those steel-toe boots, and they are completely without plastic parts, meaning they will not crack or fade over time. Their stamped, all-steel tread offers a 6-1/2 in. wide, non-skid surface that will never wear down no matter how many times you climb in and out of your truck. The end caps are also made from steel and are welded to contour to the body of your truck for a professional finish. RidgeStep running boards come with a unique E-coat and textured black powder coat finish to not only withstand rust but also to hide minor scratches and grime.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Nissan TITAN XD |
- ActionTrac 87.6in. Powered Running Boards; Select Nissan Titan; XD Crew Cab
- 79 in.; Carbide Black Powder Coat; 6061-T6 Aluminum; Includes Pair Of Running Boards/Mounting Hardware/Wiring Harness
- ARIES 3047960 ActionTrac 87.6-Inch Retractable Powered Running Boards; Fits Select Nissan Titan; XD Crew Cab
- ActionTrac™ Powered Running Boards
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
-
Features:
- Step-Within-Step Design For Easier Access On Large Vehicles
- 3 in. Powered Step Automatically Drops 8 in. When Door Opens
- 4 in. Top Step Provides Convenient Access To Roof Of The Vehicle
- Housing Shields Retractable Step/ Pivot Points And Electronics
- Contoured Design Helps Protect The Rocker Panels From Road Debris
- Simple-2-Install System w/No-Drill Brackets And No-Splice Wiring
- Powder-Coated Aluminum Is Durable/ Lightweight And Non-Corrosive
- Integrated Control Module Detects Obstructions
- Single/ Rotary Motor For Fast/ Quiet/ Maintenance-Free Operation
- Integrated Led Lights Activate On Deployment For Added Visibility
- Assembled In USA
- Includes One Pair Of Running Boards And Mounting Hardware
- ARIES ActionTrac powered running boards are unique from other power side steps because they are actually two steps in one. This patented step-within-a-step design -- combined with a no-drill bracket installation, control module operation and powder-coated aluminum construction -- truly makes these retractable running boards an asset for the offroad truck or Jeep, particularly as lifted truck steps. ActionTrac powered running boards have one 4 in. wide step on top of the main housing and one 3 in. wide that automatically deploys as needed. When the door opens, the control module deploys the power step 8 in. below the main step, 15 in. below the doorsill, depending on the model. This two-step design offers enhanced safety and easier vehicle entry and exit, especially on large, lifted vehicles. Its also very helpful for families with young children and for elderly passengers. The boards contour to the vehicle and offer extra protection for the rocker panels from small road debris. For additional safety, the module is able to detect any obstructions during operation to avoid p in. hazards. LED lights are also built into the housing to illuminate the steps when deployed. ARIES ActionTrac powered running boards are made for vehicle-specific installation for a custom fit. They use pre-existing factory holes for the brackets to eliminate drilling. They also do not require any splicing into factory wiring. These particular running boards fit specific years of the Nissan Titan (see application info to verify fitment). Each set is constructed from powder-coated aluminum to be strong, lightweight and non-corrosive. The quiet, maintenance-free rotary motor is shielded within the main housing, along with the power step pivot points and all electrical components, protecting them from the harsh elements. NOTE: Boards, brackets and wiring are included.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Nissan TITAN XD |
- Xtra Duty Class 5 Trailer Hitch; 2in. Receiver; Select Nissan Titan XD
- 16000lbs. Gross Trailer Weight; 2400lbs. Tongue Weight; 17000lbs. Weight Distributing; 2400lbs. Weight Distributing Tongue Weight
- CURT 15306 Xtra Duty Class 5 Trailer Hitch; 2-In Receiver; Compatible with Select Nissan Titan XD
- Class V 2 in. Xtra Duty Hitch
- Product Attributes:
- Gross Trailer Weight: 16000 Lbs.
- WARNING CA Proposition 65: No
- WD Tongue Weight: 2400
- WC Tongue Weight: 2400
- Weight Distribution: 17000
-
Features:
- Made w/A Vehicle-Specific Design For A Custom Fit
- Tested For Safety In Accordance w/SAE J684
- Precisely Welded For Superior Strength And Fit
- Constructed w/A Large Powerful Main Body
- Protected By A Highly Durable Carbide Powder Coat Finish
- Co-Cured In A Rust-Resistant Liquid Bonderite Coating
- Strengthened w/A Cast Welded Seamless Collar
- Features Wide Safety Chain Openings For Heavy-Duty Hooks
- Backed By A Limited Lifetime Warranty
- Made in USA [may include imported hardware]
- When we came to the limits of towing capacity, we wanted to know what else was out there. What could we discover off the beaten path? So, we kept going. CURT class 5 Xtra Duty hitches begin a class of their own, beyond class 4 and beyond anything the standards dictate. They are designed for the hard road where only full-size pickup trucks, vans and SUVs dare to tread. They are capable of pulling almost any heavy-duty trailer, including toy haulers, dump trailers, logging trailers, small yacht trailers and more (NOTE: Never exceed the lowest weight capacity of any towing component). This particular Xtra Duty class 5 trailer hitch offers a gross trailer weight capacity of 16,000 lbs. and an extra-high tongue weight capacity of 2,400 lbs. It features a 2 in. x 2 in. receiver tube opening to accept a ball mount or hitch-mounted accessory, such as a cargo carrier or w in. mount. It is designed to be a custom-fit trailer hitch for certain years of the Nissan Titan XD (to verify compatibility with your vehicle, see application info). For a little extra towing power and stability, this class 5 hitch can also be used in combination with a weight distributing hitch. It is rated for 17,000 lbs. WD and 2,400 lbs. WDTW. In our drive to create a more powerful hitch, CURT has not neglected the finer details. Our class 5 trailer hitches are welded with precision and go through multiple stages of cleaning to create a smooth surface that is ready to accept our co-cured finish. To protect them from corrosion, chipping and UV damage, these hitches are immersed in a liquid Bonderite and then finished in a high-quality black carbide powder coat. They come with grade-8 mounting hardware for solid installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Nissan TITAN XD | Rear |
- 4in. Black Steel Oval Side Bars; Select Nissan Titan; XD
- Carbon Steel; Semi Gloss Black; Board And Bracket
- ARIES S229042 4-Inch Oval Black Steel Nerf Bars; Select Nissan Titan; XD
- The Standard 4 in. Oval Nerf Bar
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Tube Shape: Oval
-
Features:
- 20-Degree Bends To Contour To The Body Of The Vehicle
- Seamless/ Welded End Caps For Superior/ Finished Look
- Raised/ Custom/ Non-Skid Step Pads For Safe/ Cozy Entry And Exit
- High-Strength Carbon Steel Construction
- Durable E-Coat And Semi-Gloss Black Powder Coat Finish
- Elliptical/ 4 in. Wide/ Heavy-Wall Tube Design
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets For Solid Step
- Includes One Pair Of Side Bars And Mounting Hardware
- When you start and end your day turning the ignition of your truck, unreliable footing just is not an option. You need a step that can bear weight with ease, provide comfortable footing and look good doing it. ARIES 4 in. oval side bars are sleek, strong and custom-fitted to be a highly functional extension of your truck. For a variety of makes and models, 4 in. oval sides are a step up. ARIES 4 in. oval side bars are made with strong 4 in. elliptical tubing and are available in two different finish options to allow for full customization: polished stainless steel and black powder coat carbon steel. This set of side bars is constructed from high-strength carbon steel for a solid step, and they feature a dual-layer E-coat and semi-gloss black powder coat finish for excellent protection against scratching, chipping and peeling. Something that sets the ARIES 4 in. oval side bar apart from all others is its blended end caps and OE-style bends. Rather than capping our side bars with a plastic cap, we offer a blended end cap for a smooth, finished appearance. We also equip the ends with a special 20-degree bend and original equipment styling to perfectly contour to your vehicle. ARIES 4 in. oval side bars are fitted with raised step pads to provide a wide stepping surface. The polypropylene construction will not crack over time, and because it has a textured grip, the surface is highly resistant to slips and skids, even when wet. Installation of ARIES 4 in. oval side bars is quick and easy with custom-fitted mounting brackets and no drilling necessary.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Nissan TITAN XD |
- 3in. Round Polished Stainless Side Bars; Select Nissan Titan; XD
- Includes Side Bars And Mounting Hardware; Polished Stainless Steel
- ARIES 209042-2 3-Inch Round Polished Stainless Steel Nerf Bars; No-Drill; Fits Select Nissan Titan; XD
- Aries 3 in. Round Side Bars
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
- Tube Shape: Round
-
Features:
- Unique Bends To Contour To The Body of The Vehicle
- Custom/ Non-Skid Step Pads For Safe Entry And Exit
- 3 in. Diameter/ Heavy-Wall Tube Design
- Strong And Truly Rust-Resistant Stainless Steel Construction
- Mirror-Like Polished Stainless Steel Finish For Bright Accent
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty Steel Mounting Brackets For Solid Step
- Includes One Pair Of Side Bars And Mounting Hardware
- ARIES 3 in. side bars add a custom look and dependable footing to your truck, Jeep or SUV. They feature a classic style, a strong design and non-skid step pads. ARIES nerf bars are all made vehicle-specific for a custom, no-drill fit, and they are available in multiple finish options. This set of nerf bars is constructed from 304 stainless steel with a polished finish. Our 304 stainless steel is a true stainless with high nickel content, offering better corrosion resistance and a long-lasting finish. The polish is a triple application, resulting in a mirror-like shine to complement your vehicle. ARIES 3 in. round side bars also come with high-strength steel brackets and non-skid step pads. The mounting brackets -- as well as the side bars and step pads -- are custom-designed for specific makes and models to allow the nerf bars to contour to the lines of your vehicle. This ensures easy, no-drill installation and the strength necessary to provide solid footing. This particular set of custom nerf bars fits specific years of the Nissan Titan and Titan XD (see application info to verify fitment). ARIES 3 in. round side bars also come with non-skid step pads made of polypropylene. These wide, custom-positioned step pads feature a textured pattern and cover a wide portion of the tubes to be more comfortable and high-traction, even in wet conditions.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Nissan TITAN XD |
- AdvantEDGE 5-1/2in. x 85in. Black Aluminum Side Bars; Select Nissan Titan; XD
- 5.5 in.; Includes Side Bars PN[2055985]; VersaTrac Brackets PN[2055142]; Carbide Black Powder Coat Aluminum
- ARIES 2556042 AdvantEDGE Black Aluminum 85-Inch Truck Running Boards; Select Nissan Titan; XD
- AdvantEDGE™ Side Bars w/Mounting Brackets
- Product Attributes:
- Side Component Type: Board And Bracket
- WARNING CA Proposition 65: No
- Tube Shape: Octagon
-
Features:
- Eight-Sided Tube Profile To Complement The Style Of Modern Trucks
- Strong/Lightweight/ Rust-Free Extruded/All-Aluminum Construction
- Stamped Aluminum Treads For Non-Skid Step Will Never Crack/ Fade
- Die-Cast Aluminum End Caps For Durable Accent
- Carbide Black Powder Coat Finish w/Black Powder-Coat Step Pads
- Durable/ Fade-Resistant Black Chromite Step Pad Hardware Finish
- Made To Complement Bull Bar And Headache Rack
- Mounting System For Easy Installation And Vehicle Customization
- No-Drill/ Vehicle-Specific Application For Custom Fit
- Heavy-Duty/ Powder-Coated Steel Mounting Brackets For Solid Step
- Includes Side Bars PN 2055985 And Brackets PN 2055142
- ARIES AdvantEDGE side bars do away with the common, rounded look of other side bars, nerf bars and running boards, featuring an angular, eight-sided tube profile and powder-coated all-aluminum construction. The angular edges provide a clear-cut, uncompromising accent for the look of todays trucks. Made from 5-1/2 in. wide, eight-sided, extruded aluminum tubing, AdvantEDGE running boards are strong, lightweight and impervious to rust, offering a solid step that is built to face the elements and outlast them. They also come with die-cast aluminum end caps and a stamped aluminum tread. The aluminum treads provide a long-lasting, non-skid stepping surface that will not crack or fade in the sun. ARIES AdvantEDGE side bars are also marked for their easy, custom-fit installation. They feature the ARIES VersaTrac mounting system with brackets that are made from powder-coated steel and built for specific vehicles. This particular set of custom running boards fits specific years of the Nissan Titan and Titan XD (see application info to verify compatibility). The high-strength steel brackets mount using pre-existing holes, and the aluminum running boards attach to the brackets with heavy-duty hardware. The VersaTrac mounting system makes installation simple and customizable, allowing the side bars to be swapped out at any time with other side steps or running boards that use the VersaTrac system. Setting yourself apart is simple with the ARIES AdvantEDGE series. In addition to these truck side steps, we also offer the AdvantEDGE bull bar and AdvantEDGE headache rack, featuring the same all-aluminum construction and eight-sided tube profile. For a fully customized look to match your pickup, AdvantEDGE side bars are available in two finish options, including carbide black powder coat and chrome powder coat.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Nissan TITAN XD |
Showing 1 - 10 of 337 products
Loading...