Shop By Product Matching "OE+"
Choose your Engine for your 1965 Pontiac Beaumont
Image
Product
Price
- W/O A.C.; Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 11.4
- 290
- End 1 Inside Diameter:
- 1.25
- 32
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.25
- 32
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
001, 047121177, 0516062016, 0516062018, 09914048, 10032771, 108422, 1115010182, 1115010282, 11522415, 1260206, 1276A7, 1336294, 1337395, 14-1781-2, 140551E401, 140552B500, 142-0256...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1965 - Pontiac Beaumont | L | 3180 | Upper | GAS | 6 Cyl 3.2L | 194 |
- W/A.C.; W/P.S.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 31.84
- 809
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 31
- 787
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0013014900, 006051202, 0060512902, 00605129020000, 0119772, 0211778013, 0211778513, 0230993, 028145271L, 03-02-545-4, 032418381, 032418381A, 035903137C, 0403312, 055903137B, 06312005, 0950775, 0950788...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1965 - Pontiac Beaumont | L | 3769 | Alternator | GAS | 6 Cyl 3.8L | 230 |
- 180 ft./lb. Torque; 14:1 Compression Ratio; 3.25:1 Gear Reduction; InfiClock System; Black Wrinkle Finish
- Mastertorque Starter; 180 ft./lb. Torque; 14:1 Compression Ratio; 3.25:1 Gear Reduction; InfiClock System; Black Wrinkle Finish;
- Mastertorque Starter
-
Features:
- Clears Most Headers and Oil Pans
- No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
- Durable Black Wrinkle Finish
- Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
- Supplied With Bolt and Shim Kit
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster Mastertorque Starters Are Rated Up to 14:1 Compression With A 3.25:1 Gear Reduction And Up to 1.8HP Producing 180 Ft-Lbs of Cranking Torque. The Mastertorque Starters Feature A Durable Black Wrinkle Finish. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee. Made in USA.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Pontiac Beaumont | V | 5358 | 8 Cyl 5.3L | 327 |
- Cut to fit
- Molded Coolant Hose
- Product Attributes:
- Branch Quantity: 0
- Contains Spring: No
- Molded: Yes
- Centerline Length:
- 14.5
- 368
- End 1 Inside Diameter:
- 1.75
- 44
- Material: Epdm
- Modular: No
- End 2 Inside Diameter:
- 1.75
- 44
- Quick Connect Fitting Quantity: 0
-
Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube
- synthetic fiber knit reinforcement
- heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
- Our Molded Coolant Hoses are manufactured to fit upper, lower, bypass, heater and other coolant applications with OEM-quality specifications, saving you time, money and energy from going to your OE dealer for radiator hose replacements. Gates' molded coolant hose line is the most comprehensive line on the replacement market.
This Part Fits the Following OEM/Substitute Numbers:
099, 14-1685-2, 20026S, 20475, 2059, 3147584, 3150392, 3151460, 3153212, 3157562, 3163639, 368, 3699921, 3713976, 3721772, 3739263, 3790408, 3839301...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1965 - Pontiac Beaumont | V | 5358 | Lower | GAS | 8 Cyl 5.3L | 327 |
- Standard; 200 ft./lb. Torque; 18:1 Compression Ratio; 4.4-1 Gear Reduction
- XS Torque Starter; Standard; 200 ft./lb. Torque; 18:1 Compression Ratio; 4.4-1 Gear Reduction;
- XS Torque Starter
-
Features:
- Clears Most Headers and Oil Pans
- No Heat Soak Or Hot Start Problems with Encapsulated Solenoid
- Billet Aluminum Mounting Block with infiCLOCK 360 Degree Rotation
- The Lightest 200ft.lb Starter Available
- Supplied With Bolt and Shim Kit
- Individually Dyno Tested with Proof of Performance Guarantee
- Powermaster XS Torque Starters Are Rated Up to 18:1 Compression With A 4.4:1 Gear Reduction And Up to 1.8HP. The XS Torque Is The Lightest 200Ft-Lbs Of Torque Starter. This Starter Features Our InfiCLOCK Design For 360 Degree Rotation For Ultimate Adjustability. All Powermaster Starters Come With Our Dyno Tested Proof Of Performance Guarantee.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1965 - Pontiac Beaumont | V | 5358 | 8 Cyl 5.3L | 327 |
- W/O A.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1011
- 39.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 39
- 991
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009840100, 0023245089, 0023255089, 0069970692, 0069972692, 0069973092, 0079972092, 0099970292, 0099975292, 0119300, 0119794, 02018183810, 024918381B, 035145271G, 0403394, 0403397, 05641010300, 069708748...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1965 - Pontiac Beaumont | L | 3769 | Fan and Alternator | GAS | 6 Cyl 3.8L | 230 |
- W/A.C.; W/O P.S.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1011
- 39.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 39
- 991
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1965 - Pontiac Beaumont | L | 3769 | Fan and Alternator | GAS | 6 Cyl 3.8L | 230 |
Showing 1 - 7 of 7 products
Loading...