Shop By Product Matching "Pro Comp"
Image
Product
Price
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 4892339AA Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 350
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Flow Rate: 10-12 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
- This item must be purchased in quantities of 12
This Part Fits the Following OEM/Substitute Numbers:
0410832, 0410852, 1048, 115, 27060, 3334, 37060, 47060, 5001202776, 5011-658680, 57060, 57060XP, 618-57060, 67060, 67060BP, 67060X, 7060, 72234WS...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Jeep Compass | L | 2360 | Mexico | 4 Cyl 2.4L | 144 |
- PROTEC-NEW Spin-On Lube Filter
- Original Equipment Part Number 4892339AA Also Available In Master Pack Version Also Available In Master Pack Version
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 350
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Flow Rate: 10-12 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Protec For Normal Diving- Advanced engine protection- Ideal filter for traditional OE recommended oil change intervals up to 10,000 miles- Cellulose and resin filter media provides up to 96.5% dirt trapping efficiency- Performs well in everyday normal driving conditions such as city and highway travel- Nitrile gasket- Solid metal end caps provide positive seal
This Part Fits the Following OEM/Substitute Numbers:
0410832, 0410852, 1048, 115, 27060, 3334, 37060, 47060, 5001202776, 5011-658680, 57060, 57060XP, 618-57060, 67060, 67060BP, 67060X, 7060, 72234WS...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2019 - Jeep Compass | L | 2360 | Mexico | 4 Cyl 2.4L | 144 |
- Engine Oil Drain Plug Gasket
- 0.550 (in) Inside Diameter x 0.890 (in) Outside Diameter Rubber Material ; Dished Washer
- FEL-PRO 72907 Engine Oil Drain Plug Gasket for Ford Escape
- Product Attributes:
- : Engine Oil Drain Plug Gasket
- Inside Diameter: 0.550
- Shape: Dished
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
This Part Fits the Following OEM/Substitute Numbers:
4720353, 6506214AA, F5TZ6734BA, YF09104J5
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2019 - Jeep Compass | L | 2360 | 4 Cyl 2.4L | 144 |
- Schrader EZ-sensor Snap-in
- Use 33560 if 33500 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Snap-in Angle Type: Fixed Angled Stem: Fixed angle Plastic Housing Material Nickel-Coated Core
- Programmable for 314.9, 315 and 433MHz Applications
- Product Attributes:
- Washer Included: No
- Mounting Hardware Included: Yes
- Grommets Included: No
- Manufacturer Warranty: 2 Years
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 11.5 Inch/lbs.
- Valve Stem Included: Yes
- Monitor Type: Direct
- Real Time Pressure Signal Transmission: Yes
- Attachment Type:
- Snap-fit
- Snap-in
- Mounting Location: Wheel
- Valve Stem Material: Rubber
- Programmed/Programmable: Programmable
- Frequency: 315 / 314.9 / 433
- Activation Type: Not Programmed, Programmable
- Core Material: Nickel-coated
- Recommended Torque (N-m): 1.3 N-m
- Valve Cap Included: Yes
- Valve Color: Black
- Material: Rubber
- Power Source: Battery
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Engineered and manufactured to OEM design and quality specifcations
- Rubber valve can be replaced by Schrader rubber snap-in valve kit 20018, or with clamp-in fixed aluminum valve stem 34000 (silver) or 34010 (black)
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Always make sure that your TPMS scan and programming tool has the latest software installed to ensure maximum coverage
- Schrader Programmable EZ-sensor with Rubber Snap-In Valve - Must be Programmed to Specific M/M/Y Vehicle
- Sensor comes fully assembled and ready to program and install
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with Schrader replacement rubber snap-in valve stems or fixed angle aluminum clamp-in stems. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service.Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Jeep Compass |
- Schrader 90 degree EZ-sensor - Programmable TPMS Sensor (Sensor Body Only)
- Use 33500 if 33900 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree No stem Nickel-Plated Brass Core
- Product Attributes:
- Washer Included: No
- Manufacturer Warranty: 2 Years
- Grommets Included: Yes
- California Prop 65 Warning Label (Text): Warning: This Product Can Expose You To Chemicals Including Lead, Which Is Known To The State Of California To Cause Cancer And Birth Defects And Other Reproductive Harm. For More Information, Go To Www.p65warnings.ca.gov
- Recommended Torque (in/Lbs): 53 Inch/lbs.
- Valve Stem Included: No
- Attachment Type: Clamp-in
- Mounting Location: Wheel
- Programmed/Programmable: Programmed
- Frequency: 314.9mhz, 315mhz, 433mhz
- Core Material: Nickel-plated Brass
- Recommended Torque (N-m): 6 N-m
- Valve Cap Included: No
-
Features:
- Easy to program and covers the majority of vehicles on the road in North America
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Ready out of the box
- OE fit, form, and function
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Replacement components in Schrader TPMS service kits are sensor specific
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Schrader EZ-sensor is a programmable sensor that combines 314.9, 315, and 433 MHz frequencies into one SKU. This multi-frequency solution has market-leading vehicle coverage and is compatible with most independent TPMS programming and diagnostics tools. EZ-sensor performs identically to OE replacement TPMS sensors and helps reduce the overall cost of service and optimize inventory levels. EZ-sensor can be interchanged with rubber snap-in valve stems or fixed angle aluminum clamp-in stems, available in silver and matte black. This sensor is not a DIY product and requires appropriate skills, knowledge, and equipment for service. Each EZ-sensor must be programmed before installation and needs a compatible TPMS programming tool.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Jeep Compass |
- Programmable EZ-sensor - Black Straight Valve - 90 Degree
- Use 33500 if 33983 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Ready out of the box
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Easy to program and covers the majority of vehicles on the road in North America
- Schrader recommends replacing service kit components using genuine Schrader TPMS service kits at every tire change. Please use Schrader supplied original replacement parts to invoke the warranty. All pieces in the kit are intended for one-time use only. TPMS service Pks are not DIY products and require appropriate skills, knowledge, and equipment for service.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Jeep Compass |
- Programmable EZ-sensor - Black Angled Valve - 90 Degree
- Use 33500 if 33982 is not available Screw torque = 11.5 in-lbs; Valve core torque = 3.5 in-lbs, 0.4Nm Attachment Type: Clamp-in Angle Type: 90 degree Straight Stem: Mounted relative to sensor body Black Stem
- Product Attributes:
- Attachment Type: Clamp-in
- Power Source: Battery
-
Features:
- OE fit, form, and function validated and engineered by over 350 engineers dedicated to TPMS
- Compatible with the majority of independent TPMS programming and diagnostic tools on the market
- Future-proofed OE quality TPMS product supports new and pending OE technologies
- Combines 314.9, 315, and 433 MHz frequencies for improved vehicle coverage
- Ready out of the box
- Easy to program and covers the majority of vehicles on the road in North America
- Replacement components in Schrader TPMS service kits are sensor specific
- OE fit, form, and function
- Valve cores are nickel-plated to improve durability and help prevent rust and corrosion
- Each kit includes everything you need to properly service TPMS-equipped wheel and tire assemblies
- Interchangeable with clamp-in fixed aluminum valve stem, available in silver and matte black
- Schrader has been the leading global manufacturer of valves and sensing solutions for automotive and industrial applications, delivering solutions that protect and perform. Schrader is widely known for the invention of the standard pneumatic tire valve, the same valve used on most motor vehicles in the world.
Additional Fitment Information:
| Vehicle |
|---|
| 2019 - Jeep Compass |
- GM Bumper Retainer
- Dorman Packaging Type: Clamshell Package Quantity: 2
- Product Attributes:
- Head Diameter: 0.625
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: 2 Remaches
- Longitud total: 1 In
- Material:
- Nailon
- Nylon
- Shaft Diameter: 0.312
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
11589290, 14019205, 15773445, 20452072, 20590899, 20664092, 22538004, 25811887, 461030, 461030AA, 461030B, 6509049AA, W714040S300
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Jeep Compass | Front |
- Chrysler, GM Molding Retainer
- Push Pin Wheelhouse Package Quantity: 2 Packaging Type: Clamshell
- Product Attributes:
- Head Diameter: 0.625
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: 2 Remaches
- Material:
- Nailon
- Nylon
- Shaft Diameter: 0.25
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Jeep Compass | Rear |
- Chrysler, GM Molding Retainer
- Fender Push Pin Package Quantity: 2 Packaging Type: Clamshell
- Product Attributes:
- Head Diameter: 0.625
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: 2 Remaches
- Material:
- Nailon
- Nylon
- Shaft Diameter: 0.25
-
Features:
- Ideal replacement - this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material - this retainer is made of durable material for long-lasting service
- Versatile design - this retainer is suitable for a variety of automotive uses
- Excellent value - this part offers original equipment quality at a competitive cost
- Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
This Part Fits the Following OEM/Substitute Numbers:
10368, 20988, 25642453, 461010, 461010AA, 461010B, 6045800AA, 6508863, 6508863AA, W713610S300
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2019 - Jeep Compass | Front |
Showing 1 - 10 of 20 products
Loading...