Shop By Product Matching "Proform"
Choose your Engine for your 1972 Ford Custom
Image
Product
Price
- For Ford 351W Engine
- HEI Distributor; Street/Strip; Built-In Coil; Blue Cap; Housing Finish:Natural
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 351w Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Fits Ford 351 Windsor.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Technical Note: Gear Not Compatible With Roller Cams
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Fits Ford 351 Windsor.
- Fits Ford 351 Windsor. Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Custom | V | 5753 | 8 Cyl 5.8L | 351 |
- For Ford 351W Engine
- HEI Distributor Street/Strip Built-In Coil Blue Cap Housing Finish: Natural
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 351w Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Fits Ford 351 Windsor.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Technical Note: Gear Not Compatible With Roller Cams
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Fits Ford 351 Windsor.
- Fits Ford 351 Windsor. Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Custom | V | 5753 | 8 Cyl 5.8L | 351 |
- Fits Ford 289-302 Engine
- HEI Distributor Street/Strip Built-In Coil Housing Finish: Natural Cap Color: Blue
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Distributors
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a blue cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Custom | V | - | 8 Cyl 5.0L | 302 |
- For Ford 289-302 Engine
- HEI Distributor; Street/Strip; Built-In Coil; Black Cap; Housing Finish:Natural
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Black Cap.
- Shaft Material: Aluminum
- Cap Color: Black
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a black cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a black distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Custom | V | - | 8 Cyl 5.0L | 302 |
- Fits Ford 289-302 Engine
- HEI Distributor; Street/Strip; Built-In Coil;Housing Finish:Natural; Cap Color:Blue
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Distributors
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Blue Cap.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a blue cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a blue distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. Made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Custom | V | - | 8 Cyl 5.0L | 302 |
- For Ford 289-302 Engine
- HEI Distributor Street/Strip Built-In Coil Black Cap Housing Finish: Natural
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 289 To 302 5.0 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Street/strip Distributor Has A Built-in Coil And Features A Black Cap.
- Shaft Material: Aluminum
- Cap Color: Black
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Street/strip distributor has a built-in coil and features a black cap.
- This HEI distributor is a street/strip version. It has a built-in coil with a magnetic trigger and features a black distributor cap. Designed to fit Ford 289-302 5.0 engines. Distributor comes with an iron gear. Not compatible with factory roller camshafts without gear change using the recommendation of the cam manufacturer. Unit is made from high quality billet aluminum material and features a natural finish. made from 100% new components. Utilizing the durable and dependable high energy ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-made parts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found high energy ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Backed by a limited 30 day factory warranty.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Custom | V | - | 8 Cyl 5.0L | 302 |
- For Ford 351M, 351C-460 Engine
- HEI Distributor Street/Strip Built-In Coil Housing Finish: Natural Cap Color: Blue
- Comes With An Iron Gear and With Not Work With Factory Roller Cams
- Product Attributes:
- Rotation: Standard
- Housing Finish:
- Natural
- Painted
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Shaft Color: Polished
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Operation Type: Standard
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 351c To 460 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Fits Ford 351m, 351c - 460 Engines.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Distributor Gear Included: No
- Mechanical Advance: 22 Degrees
- Technical Note: Gear Not Compatible With Roller Cams
- Housing Color: Blue
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Ignition Module Included: Yes
- Shaft Length: 9.65
-
Features:
- Fits Ford 351M, 351C - 460 Engines.
- Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Custom | V | 7539 | 8 Cyl 7.5L | 460 |
- For Ford 351M, 351C-460 Engine
- HEI Distributor; Street/Strip; Built-In Coil;Housing Finish:Natural; Cap Color:Blue
- Comes With An Iron Gear and With Not Work With Factory Roller Cams
- Product Attributes:
- Rotation: Standard
- Housing Finish:
- Natural
- Painted
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Shaft Color: Polished
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Operation Type: Standard
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 351c To 460 Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Fits Ford 351m, 351c - 460 Engines.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Distributor Gear Included: No
- Mechanical Advance: 22 Degrees
- Technical Note: Gear Not Compatible With Roller Cams
- Housing Color: Blue
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Ignition Module Included: Yes
- Shaft Length: 9.65
-
Features:
- Fits Ford 351M, 351C - 460 Engines.
- Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Custom | V | 7539 | 8 Cyl 7.5L | 460 |
- 100% New
- Amperage Output:100 AMP; Finish:Chrome; Case Style:10SI (Ford)
- Sold Individually
- Product Attributes:
- Brushless: No
- Voltage: 12 Volt
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Case Material: Aluminum
- Case Color: Chrome
- Fan Type: Internal
- Amperage Rating: 100
- Amperage Output: 100 Amp
- Family: 10si Style
- Finish: Chrome
- Case Circumference: 17.5
- Drive End To Rotor Shaft End Distance: 6
- AC Service Tap: No
- Category: Alternators
- External Regulator Included: Yes
- Case Style: 10si (ford)
- Regulator Type: Internal
- Decoupled Or Clutch Pulley: Yes
- Distance Between Mounting Feet: 6.133
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: A Manufacturing Break-through Has Enabled Proform To Offer 100% New Alternators With The Same Affordability As Our Popular Re-built Models!
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- PROFORM's 100 AMP Alternator, for Ford 260-460 engines, is a 1-wire, GM 10 SI Case Style complete with Internal Regulator. The External Fan Style Alternator features a Machined Pulley, Chrome Finish and is NOT made with re-man components. Each alternator is produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment - 100% New. Sold individually.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Region | Valves | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1972 - Ford Custom | V | 7539 | OHV | United States | 16 | 8 Cyl 7.5L | Base | Naturally Aspirated | 460 |
- Ford 302-351W-429-460
- Oil Pan Dipstick Kit Screw-In Type Material: Stainless Steel
- Sold As One Complete Kit
- Product Attributes:
- Category: Oil
- Feature/Benefit: This Flexible Braided Stainless Steel Dipstick Is The Perfect Addition To Your Ford Oil Pan.
- Applications: Ford Small Block 289 To 302 To 351w To 429 To 460 Engines; Ford Big Block 429 To 460 Engines
- Tool Type: Piston Installation Tools
- Make: Ford
- Material: Stainless Steel
- Finish: Stainless Steel
- This flexible braided stainless steel dipstick is the perfect addition to your Ford oil pan. This part screws into the oil pan, so make sure you have the appropriate threaded inlet. Fits: 289-302-351W-429-460.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1972 - Ford Custom | V | 7539 | 8 Cyl 7.5L | 460 |
Showing 1 - 10 of 13 products
Loading...