Image
Product
Price
- For Ford 351W Engine
- HEI Distributor Street/Strip Built-In Coil Blue Cap Housing Finish: Natural
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 351w Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Fits Ford 351 Windsor.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Technical Note: Gear Not Compatible With Roller Cams
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Fits Ford 351 Windsor.
- Fits Ford 351 Windsor. Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- For Ford 351W Engine
- HEI Distributor; Street/Strip; Built-In Coil; Blue Cap; Housing Finish:Natural
- Made From Billet Aluminum With Natural Finish
- Product Attributes:
- Rotation: Standard
- Housing Finish: Natural
- Voltage: 50,000 Volts
- Distributor Cap Included: Yes
- Grade Type: Performance
- Make: Ford
- Gear Material: Cast Iron
- Trigger Type: Magnetic
- Advance Type: Mechanical And Vacuum
- Category: Ford Hei Distributor
- Marine Approved: No
- Applications: Ford 351w Engines
- Vacuum Advance: 13 Degrees
- Ignition Box Required: No
- Feature/Benefit: Fits Ford 351 Windsor.
- Shaft Material: Aluminum
- Cap Color: Blue
- Rotor Rotation: Clockwise (right)
- Ignition Rotor Included: Yes
- Mechanical Advance: 22 Degrees
- Technical Note: Gear Not Compatible With Roller Cams
- Ignition Coil Included: Yes
- Coil Wire Included: Yes
- Terminal Type: Lead Wire
- Terminal Gender: Male
- Shaft Length: 9.65
-
Features:
- Fits Ford 351 Windsor.
- Fits Ford 351 Windsor. Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing). Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- 100% New
- Amperage Output:100 AMP; Finish:Chrome; Case Style:10SI (Ford)
- Sold Individually
- Product Attributes:
- Brushless: No
- Voltage: 12 Volt
- Ground Type: Positive
- Pulley Diameter: 2 1/2 Inch
- External Fan Included: Yes
- Case Material: Aluminum
- Case Color: Chrome
- Fan Type: Internal
- Amperage Rating: 100
- Amperage Output: 100 Amp
- Family: 10si Style
- Finish: Chrome
- Case Circumference: 17.5
- Drive End To Rotor Shaft End Distance: 6
- AC Service Tap: No
- Category: Alternators
- External Regulator Included: Yes
- Case Style: 10si (ford)
- Regulator Type: Internal
- Decoupled Or Clutch Pulley: Yes
- Distance Between Mounting Feet: 6.133
- Drive End To Pulley 1st Groove Distance: 1.4
- Feature/Benefit: A Manufacturing Break-through Has Enabled Proform To Offer 100% New Alternators With The Same Affordability As Our Popular Re-built Models!
- One Wire Capable: Yes
- Outside Pulley Diameter: 2.621
- Pulley Cogged Quantity: 1
- Plug Clock Rear View Main Mounting Ear at 6 O Clock: 2
- Pulley Belt Type: V-belt
- Pulley Groove Quantity: 0
- Mounting Type: Standard
- PROFORM's 100 AMP Alternator, for Ford 260-460 engines, is a 1-wire, GM 10 SI Case Style complete with Internal Regulator. The External Fan Style Alternator features a Machined Pulley, Chrome Finish and is NOT made with re-man components. Each alternator is produced by highly specialized machines, assembled by highly trained personnel using dedicated jigs and equipment - 100% New. Sold individually.
Additional Fitment Information:
| Vehicle | Block | CC | Cylinder Head Type | Region | Valves | Engine | Sub Model | Aspiration | CID |
|---|---|---|---|---|---|---|---|---|---|
| 1979 - Ford Bronco | V | - | OHV | United States | 16 | 8 Cyl 6.6L | Ranger XLT | Naturally Aspirated | 400 |
- Ford 302-351W-429-460
- Oil Pan Dipstick Kit Screw-In Type Material: Stainless Steel
- Sold As One Complete Kit
- Product Attributes:
- Category: Oil
- Feature/Benefit: This Flexible Braided Stainless Steel Dipstick Is The Perfect Addition To Your Ford Oil Pan.
- Applications: Ford Small Block 289 To 302 To 351w To 429 To 460 Engines; Ford Big Block 429 To 460 Engines
- Tool Type: Piston Installation Tools
- Make: Ford
- Material: Stainless Steel
- Finish: Stainless Steel
- This flexible braided stainless steel dipstick is the perfect addition to your Ford oil pan. This part screws into the oil pan, so make sure you have the appropriate threaded inlet. Fits: 289-302-351W-429-460.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- Ford 302-351W-429-460
- Oil Pan Dipstick Kit; Screw-In Type; Material:Stainless Steel
- Sold As One Complete Kit
- Product Attributes:
- Category: Oil
- Feature/Benefit: This Flexible Braided Stainless Steel Dipstick Is The Perfect Addition To Your Ford Oil Pan.
- Applications: Ford Small Block 289 To 302 To 351w To 429 To 460 Engines; Ford Big Block 429 To 460 Engines
- Tool Type: Piston Installation Tools
- Make: Ford
- Material: Stainless Steel
- Finish: Stainless Steel
- This flexible braided stainless steel dipstick is the perfect addition to your Ford oil pan. This part screws into the oil pan, so make sure you have the appropriate threaded inlet. Fits: 289-302-351W-429-460.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- Fits Ford 260-289-302-351W
- Tube Kit;Finish:Chrome; Material:Steel; Style:Non-Locking
- Sold as One Complete Kit
- Product Attributes:
- Category: Oil
- Feature/Benefit: Chrome, Steel.
- Applications: Ford Small To Block 260 To 289 To 302 To 351w Engines 1962 To 1978
- Make: Ford
- Material: Steel
- Finish: Chrome
- Chrome, steel.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- Fits Ford 260-289-302-351W
- Tube Kit Finish: Chrome Material: Steel Style: Non-Locking
- Sold as One Complete Kit
- Product Attributes:
- Category: Oil
- Feature/Benefit: Chrome, Steel.
- Applications: Ford Small To Block 260 To 289 To 302 To 351w Engines 1962 To 1978
- Make: Ford
- Material: Steel
- Finish: Chrome
- Chrome, steel.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- Fits Ford 302HO/351W
- 1.6 Ratio 5/16 Stud Pedestal Mount Arm Style: Full Roller Body Style: Standard Finish: Blue Anodized Material: Extruded Aluminum
- One Set of 16 pcs
- Product Attributes:
- Nut Style: N/a
- Feature/Benefit: Fits Ford Alum.
- Includes Shims: No
- Engine: Ford 302ho & 351w
- Ratio: 1.6
- Mounting Style: Pedestal
- Make: Ford
- Maximum Spring Diameter (In.): 1.500 In.
- Body Style: Standard
- Finish: Blue Anodized
- Fasteners Included: Yes
- Category: Roller Rocker Arm Set
- Applications: Ford 302ho; 351w Engines 1977 To 1994
- Arm Style: Full Roller
- Self-Aligning: No
- Material: Extruded Aluminum
- Stud Diameter (in.): 5/16 In.
- PROFORM Super Street Aluminum Roller Rockers have a beautiful anodized finish, extremely tight tolerances, and upgraded cage bearings. Fits Ford S/B aluminum cylinder heads, pedestal mount '77-'94, 302HO and 351W hydraulic and roller cams. Rid your engine of internal friction with roller-tipped rocker arms. The race-proven full needle bearing, fulcrum, and roller tip not only unleash horsepower, they also lengthen valve train component life and reduce wear and tear on valve stem tips. Precision machined to insure consistency and ratio accuracy.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- Fits Ford 302HO/351W
- 1.6 Ratio 5/16 Stud; Pedestal Mount; Arm Style:Full Roller; Body Style:Standard; Finish:Blue Anodized; Material:Extruded Aluminum
- One Set of 16 pcs
- Product Attributes:
- Nut Style: N/a
- Feature/Benefit: Fits Ford Alum.
- Includes Shims: No
- Engine: Ford 302ho & 351w
- Ratio: 1.6
- Mounting Style: Pedestal
- Make: Ford
- Maximum Spring Diameter (In.): 1.500 In.
- Body Style: Standard
- Finish: Blue Anodized
- Fasteners Included: Yes
- Category: Roller Rocker Arm Set
- Applications: Ford 302ho; 351w Engines 1977 To 1994
- Arm Style: Full Roller
- Self-Aligning: No
- Material: Extruded Aluminum
- Stud Diameter (in.): 5/16 In.
- PROFORM Super Street Aluminum Roller Rockers have a beautiful anodized finish, extremely tight tolerances, and upgraded cage bearings. Fits Ford S/B aluminum cylinder heads, pedestal mount '77-'94, 302HO and 351W hydraulic and roller cams. Rid your engine of internal friction with roller-tipped rocker arms. The race-proven full needle bearing, fulcrum, and roller tip not only unleash horsepower, they also lengthen valve train component life and reduce wear and tear on valve stem tips. Precision machined to insure consistency and ratio accuracy.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
Showing 1 - 9 of 9 products
Loading...