Shop By Product Matching "Proform"
Image
Product
Price
- 4 Pcs
- Chrome with Red Bowtie Logo; SB Chevy
- Sold As One Set of 4 Pieces
- Product Attributes:
- Emblem: Chevy Bowtie Emblem
- Category: Hold-down Clamps
- Feature/Benefit: Premium Street Performance Chrome Hold-down Clamps With Distinctive Look And Boldly Striking Bowtie Emblems, Inlaid With Classic Chevrolet Red.
- Applications: Chevy Small Block 262 To 400 Engines 1959 To 1986; Chevy V6 Engines; Chevy Big Block 396 To 454 Engines 1965 To 1996
- Emblem Style: Recessed Red & Black Emblem
- Material: Steel
- Finish: Chrome
- Premium Street Performance Chrome hold-down clamps with distinctive look and boldly striking Bowtie Emblems, inlaid with classic Chevrolet red. By spreading the load over a wider area, this clamp minimizes distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage. Fits Chevrolet small-block V8 and V6/90 engines through 1986. 4 per package.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle |
|---|
| 2004 - Chevrolet Blazer |
- 168 Tooth
- High-Torque Starter; High Compression; Compression Ratio:14 : 1; Finish:Natural; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:4.41:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.9 Kilo Watts
- Natural Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 4.41:1
- Feature/Benefit: For Engines With Monster Cubic Inches Or Compression Ratios, These 100% New Starters Challenge The Specifications, Durability, And Reliability Of Anything On The Market.
- Compression Ratio: 14 : 1
- Make: Chevrolet
- Finish: Natural
- Category: Starters
- Power Output: 1.9 Kilo Watts
- Applications: Chevy Small Block Engines And Chevy Big Block Engines
- Mounting Plate: Staggered Bolt Mounting Plate
- Flywheel Tooth Number: 168-tooth
- Material: Aluminum/steel
- For engines with monster cubic inches or compression ratios, these 100% NEW starters challenge the specifications, durability, and reliability of anything on the market. Built from scratch with all-new components, the torque rating is a healthy 4.41:1 gear reduction, capable of cranking engines up to a whopping 14:1 compression. Comes in the NEW Race Box Packaging! Fits Chevy small and big block engines. Fits Chevy V8.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Chevrolet Blazer | V | - | 6 Cyl 4.3L | 262 |
- Wedge-Locking Header Bolts
- Hex Head; 3/8-16 Thread X 3/4 in Black Oxide
- Fits GM BB 396-502 exc 348 and 409, Ford 5.0L, SB 289-302-351W, Mopar 413
- Product Attributes:
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Applications: Fits Gm Bb 396-502 Exc 348 And 409, Ford 5.0l, Sb 289-302-351w, Mopar 413
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with sixteen Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Chevrolet Blazer | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head; 3/8 dia. X 3/4in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac '79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8" bolts
- Product Attributes:
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Thread Type: Fine
- Head Drive Type: Hex
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 3/4" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Chevrolet Blazer | V | - | 6 Cyl 4.3L | 262 |
- 12 Pcs
- Hex Head; 3/8 dia. X 1in Black Oxide
- Fits GM V6, SB 265-400, Buick, Olds, Pontiac 79 and earlier, Mopar BB 383-440 exc 413, AMC V8's w 3/8in bolts
- Product Attributes:
- Category: Header Bolts
- Feature/Benefit: Wedge-locking Technology Eliminates Constantly Re-tightening Exhaust Collector Bolts; Blocks Bolt-loosening Rotation Caused By Vehicle Vibrations.
- Applications: Fits Gm V6, Sb 265-400, Buick, Olds, Pontiac 79 And Earlier, Mopar Bb 383-440 Exc 413, Amc V8's W 3/8in Bolts
- Material: Steel
- Finish: Black Oxide
- PROFORM Wedge-Locking Header Bolts ELIMINATE the need to constantly re-tighten collector bolts, and without the need for clips, pins, racing-wire, chemicals or gunk. The secret is in the Wedge-Locking Washer's super-hardened external teeth that "bite" into the bottom of the bolt head and the top flange surface. Vibrations that normally cause other bolts to loosen, are blocked by the wedge-locking action that uses tension, instead of friction to stay snug. In fact, contact with oil actually facilitates the effect. Installs/uninstalls with a normal wrench, lubricate, and then reuse. Each set comes with twelve Hex Head, Grade 8 (12.9) steel bolts (3/8"-16 thread, 1" long) with a black oxide finish, and pre-assembled Wedge-Locking Washers.
-
Suggested Purchase Quantity: 12
- Most jobs typically require 12 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Chevrolet Blazer | V | - | 6 Cyl 4.3L | 262 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 1.4KW; Compression Ratio:11 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio:
- 11.0:1
- 3.75:1
- Grade Type: Performance
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 11 : 1
- Nose Cone Type: Open Nose
- Make: Chevrolet
- Family: Mini Hitachi
- Finish: Natural
- Category: Starters
- Power Output: 1.4 Kw
- Applications: Chevy Small Block Engines, Chevy Big Block Engines And Chevy V6 Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Solenoid Attached: Yes
- Flywheel Tooth Number: 153 & 168-tooth
- Mounting Type: Flange
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations. Fits all Chevy V6 and small and big block V 8 engines using 153 or 168 tooth flywheels. Heavy-duty PROFORM P/N 66258 weighs 1-1/2 lbs. more and is 1" longer than P/N 66256.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Chevrolet Blazer | V | - | 6 Cyl 4.3L | 262 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter; Stagger Bolt; Compression Ratio:10 : 1; Finish:Silver/Black; Flywheel Tooth Number:168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Staggered Bolt Mounting Plate; Power Output:1.7 Kilo Watts
- Natural Finish
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 10 : 1
- Make: Chevrolet
- Finish: Silver/black
- Category: Starters
- Power Output: 1.7 Kilo Watts
- Applications: Chevy Small Block Engines And Chevy Big Block Engines
- Mounting Plate: Staggered Bolt Mounting Plate
- Flywheel Tooth Number: 168-tooth
- Weight: 8.3 Lbs.
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Chevrolet Blazer | V | - | 6 Cyl 4.3L | 262 |
- Fits Chevy V8-V6 Engines
- High-Torque Starter; Gear Reduction Type; 2.2KW; Compression Ratio:15 : 1; Finish:Natural; Flywheel Tooth Number:153 and 168-Tooth; Gear Reduction Ratio:3.75:1; Material:Aluminum/Steel; Mounting Plate:Straight Bolt Mounting Plate
- Sold Each
- Product Attributes:
- Rotation: Standard
- Gear Reduction Ratio: 3.75:1
- Feature/Benefit: High-torque, Gear-reduction Design.
- Compression Ratio: 15 : 1
- Make: Chevrolet
- Finish: Natural
- Category: Starters
- Power Output: 2.2 Kilo Watts
- Applications: Chevy V6 Engines, Chevy Small Block Engines And Chevy Big Block Engines
- Mounting Plate: Straight Bolt Mounting Plate
- Flywheel Tooth Number: 153 & 168-tooth
- Material: Aluminum/steel
- High-torque, gear-reduction design. 100% NEW, not rebuilt. Offset design results in more clearance between the oil pan and the starter, and can be rotated for additional chassis clearance. The high-torque, high-output motor spins the engine over faster than stock starters, delivering 40-50% more cranking power. 3.75-to-1 sealed gear-reduction drive and full ball bearing construction. Includes shims to set pinion-gear engagement (when necessary). Approved by all leading sanctioning organizations.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2004 - Chevrolet Blazer | V | - | 6 Cyl 4.3L | 262 |
Showing 1 - 8 of 8 products
Loading...