Shop By Product Matching "RoadSport"
Choose your Submodel for your 2023 Toyota 4Runner
Image
Product
Price
- Active Off Road Bumpstops;
- Active Off Road Bumpstops
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Designed To Maximize Axle Travel
- Progressive Spring Rate
- Absorbs Energy
- Allows Smooth Axle Engagement
- Easy Installation
- Satisfaction Guarantee
- The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles' suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee. The ABSTOF replaces the front bumpstops on the Toyota Tundra, Tacoma, FJ Cruiser, 4Runner, Landcruiser 100 & 200 Series and Landcruiser 78/79 Series. Install a bumpstop kit and experience the difference.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2023 - Toyota 4Runner | Front | TRD Sport | 4WD |
- Peerless Running Boards
- Black Aluminum
-
Features:
- Black Horse Off Road Aluminum Peerless Running Board - Features an all-black design.
- Compatible with 2010-2024 Toyota 4Runner
- 5" stepping surface to ease step in and out of vehicle
- Built with heavy-duty aluminum
- Resistant to rust and corrosion for long-lasting use
- All necessary hardware included
- Easy set up using factory holes
- Sold in pair
- Black Horse Off Road Peerless Running Boards Black Aluminum Includes 2023 40th Anniversary Model & Excl. 2010-13 SR5, 2010-24 Limited & 19-22 Nightshade Edition or models with Lower Rocker Panel Extensions
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Toyota 4Runner | TRD Sport |
- Max T Bull Bar
- Textured Black Steel
-
Features:
- Black Powder Coated Max T Bull Bar MBT-MT0312 by Black Horse Off Road compatible with 2010-2023 Toyota 4Runner
- Installation Instruction and mounting hardware included
- May interfere with front sensors and MAY INTERFERE with ADAPTIVE CRUISE CONTROL if EQUIPPED
- 3-year Manufacturers Limited Warranty
- Textured Finish
- The most heavy - duty of all bull bars designed to protect in the toughest environments
- Tough frame mounted, no-drill bolt on installation
- Manufactured in heavy duty 2.5 cold-rolled 16-gauge 2.5 dia. round steel tubing
- Available in black chip-resistant textured powder-coat and an e-coat undercoat for maximum rust protection.
- Pre-drilled holes configured to accept optional Black Horse 20 LED Light Bar PL3104FS & PL1223
- Includes license plate relocation kit
- Easy bolt-on installation
- Black Horse Off Road Max T Bull Bar Textured Black Steel come with License plate Relocator Exclude 14-19 Limited 2.5" Dia Tube It May Interfere with Vehicles equipped with Emergency Braking Systems, Adaptive Cruise Control and Parking Sensors
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Toyota 4Runner | TRD Sport |
- TrailSlider-Cab Len (2Steps)-10-24 4Runner(NonLim/TRD Sport/10-13 SR5)-TX Blk
- 2 Steps; Textured Black
- TrailSlider Step System-Cab Length (2 Steps per Side)-2010-2024 Toyota 4Runner (Does not fit Limited; TRD Sport; Nightshade and 10-13 SR5 Models)-Textured Black
- TrailSlider Step System
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Tube Shape: Round
-
Features:
- Fully Welded And Gusseted One-Piece Design
- Features A Durable Textured Black Powdercoat Finish
- 2 X 2 in .1875 in.-Wall Primary Tube With .188 in.-Thick Steel Plate Gussets
- .095 in.-Wall Outside Tube With Steel Gussets To Protect From Side Impacts
- Easy Installation
- The N-FAB TrailSlider is a body-mount rock slider that features 3/16 in. heavy gauge steel tubing and gussets that will hold up to extreme conditions. The TrailSlider also comes powder-coated in our durable, textured black finish. Easy to install with no special tools required, the new N-FAB TrailSlider is the ultimate upgrade for any 4-Runner, Wrangler, Tacoma, Colorado, and Ranger.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | TRD Off-Road Premium | 241 |
- Nerf Step-W2W (2 Stps)-10-24 4Runner Non-Limited/TRD Sport/10-13 SR5-GlossBlk
- 2 in. Tube; 2 Steps Per Side; Gloss Black
- Nerf Step Bar-Wheel-to-Wheel (2 Steps per Side)-2 in. Main Tube Diameter-2010-2024 Toyota 4Runner Non-Limited-Gloss Black
- Wheel To Wheel Nerf Step Bar
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Tube Shape: Round
-
Features:
- Main Bar Is Built High And Tight To Hide Frame
- Patented Nerf Step Design
- Provides Added Protection From Road Debris
- Solid 1Pc Non Modular Design For Easy Installation
- Tube Is Treated For Corrosion Inside And Out
- Welded Step Pads Will Not Crack Or Break
- Limited Lifetime Warranty
- One of N-FAB's most popular styles is the Wheel to Wheel Nerf-Step. Utilizing N-FAB's patented hoop step design and innovative mounting system, N-FAB Wheel to Wheel Nerf Steps work on vehicles with and without body lift kits, with no modifications to brackets or bars. All N-FAB Wheel to Wheel Nerf Steps are built using .084 wall steel tubing and offer an industry high load rating of 465 pounds. All N-FAB Wheel to Wheel Nerf Steps are constructed as one-piece assemblies to provide maximum strength and durability not found in modular designs. Wheel to Wheel Nerf-Steps are designed and built specifically for each application, and mount high and tight to the vehicle cab for a clean factory look.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | TRD Off-Road | 241 |
- Pinnacle Running Boards
- Black & Silver Aluminum
-
Features:
- All-black design with stainless steel trim
- 350lb weight capacity
- Includes step-by-step installation instructions.
- Includes mounting hardware. / Limited lifetime warranty .
- 5.5" wide flat stepping surface
- Lightweight and rust- free aluminum construction
- Stainless steel side trim for extra protection
- Stainless steel tread inserts
- Full length wheel-to-wheel fit
- Value added high - quality OEM appearance.
- Bolt-on installation using factory mounting points.
- High chip resistant powder-coat over e-coat base
- Black Horse Off Road Pinnacle Running Boards Black & Silver Aluminum Excl. 2010-13 SR5, 2010-24 Limited & 19-22 Nightshade Edition or models with Lower Rocker Panel Extensions
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Toyota 4Runner | TRD Sport |
- RKR Rails-Cab Len (2 Steps)-10-24 4Runner EXC. Limited;TRD Sport;NSHD-TX Blk
- Textured Black; Steps Not Included
- RKR Rock Rails-Cab Length (2 Steps per Side)-2010-2024 Toyota 4Runner 4 Runner (Does not fit Limited; Nightshade; TRD Sport and 10-13 SR5 Models) Textured Black
- RKR Rock Rails Cab Length
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
-
Features:
- Bolt-On Design Will Not Flex
- Corrosion Treated Heavy Duty Tubular Steel
- Enhance Looks
- Fully Welded Double Tube Design
- Lifetime Product Warranty
- Optimum Strength And Protection
- Provide Superior Protection
- N-FAB RKR Rails Provide superior protection while enhancing the look of the vehicle. Constructed using 0.12 in. wall, 1.75 in. tubular steel, RKR Rails are treated inside and out for extra corrosion resistance so you know they are built to last. Finished with a durable textured black powder coat, N-FAB RKR Rails look as good as they perform both on and off-road. Making a great product even better, N-FAB offers optional Detachable Steps that are compatible with all N-FAB RKR Rails and Factory Toyota FJ Rock Rails. These steps offer convenient vehicle access for daily use and can be removed to allow for maximum group clearance when off-road.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Toyota 4Runner | TRD Off-Road |
- Nerf Step-W2W (2 Stps)-10-24 4Runner Non-Limited/TRD Sport/10-13 SR5-TX Blk
- 2 in. Tube; 2 Steps Per Side; Textured Black
- Nerf Step Bar-Wheel-to-Wheel (2 Steps per Side)-2 in. Main Tube Diameter-2010-2024 Toyota 4Runner Non-Limited-Textured Black
- Wheel To Wheel Nerf Step Bar
- Product Attributes:
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov.
- Tube Shape: Round
-
Features:
- Main Bar Is Built High And Tight To Hide Frame
- Patented Nerf Step Design
- Provides Added Protection From Road Debris
- Solid 1Pc Non Modular Design For Easy Installation
- Tube Is Treated For Corrosion Inside And Out
- Welded Step Pads Will Not Crack Or Break
- Limited Lifetime Warranty
- One of N-FAB's most popular styles is the Wheel to Wheel Nerf-Step. Utilizing N-FAB's patented hoop step design and innovative mounting system, N-FAB Wheel to Wheel Nerf Steps work on vehicles with and without body lift kits, with no modifications to brackets or bars. All N-FAB Wheel to Wheel Nerf Steps are built using .084 wall steel tubing and offer an industry high load rating of 465 pounds. All N-FAB Wheel to Wheel Nerf Steps are constructed as one-piece assemblies to provide maximum strength and durability not found in modular designs. Wheel to Wheel Nerf-Steps are designed and built specifically for each application, and mount high and tight to the vehicle cab for a clean factory look.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2023 - Toyota 4Runner | V | 3956 | 6 Cyl 4.0L | TRD Off-Road | 241 |
- Rain Guards
- Smoke Acrylic In Channel
-
Features:
- In-channel application - easily installs inside the window channel
- Constructed of a durable, shatterproof acrylic
- Smoke finish coordinates nicely with factory or aftermarket tinted windows
- Rain guards deflect rain, snow, and sleet allowing you to keep your windows slightly open even in inclement weather
- Aerodynamic design redirects the airflow around your windows, minimizing wind noise for a quieter ride
- Leaving windows cracked helps to regulate interior temperatures, preventing excessive heat buildup on sunny days
- Limited lifetime warranty
- Black Horse Off Road Rain Guards Smoke Acrylic In Channel
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2023 - Toyota 4Runner | TRD Sport |
Showing 1 - 10 of 10 products
Loading...