Image
Product
Price
- NGK V-Power Spark Plug
- Gap 0.044" OE Equivalent Design
- V-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Standard
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Ur4
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ur4
- Resistor Type: Yes
- Stock Number: 6630
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Nickel/copper
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.460
- 11.2
- Center Electrode Tip Material: Nickel
- Skirt Length: 0.0
- Manufacturer Heat Range: 4
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.19
- 55.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- NGK's OE CERAMIC TECHNOLOGY: High grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance
- RECOMMENDED USAGE: Best for vehicles with OE nickel alloy plugs, not recommended on vehicles with factory precious metal plugs
- ACTUAL OE or EQUIVALENT DESIGN: OEM quality construction nickel alloy center electrode with V-groove provides consistent performance
- NGK V-Power spark plugs offer reliable performance and improved ignitability over standard nickel plugs. Engineered specifically for OE applications, the special V-cut nickel alloy center electrode and concave ground electrode of NGK's V-Power spark plug increases ignitability providing quicker starts and smoother idle. NGK's legendary high grade alumina silicate ceramic creates a stronger insulator for optimal dielectric performance. Trivalent metal plating ensures superior anti-corrosion and anti-seizing properties.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1052895W, 15, 16, 1765179, 18, 1835800T, 1835906T, 18C2, 18S, 19, 25, 25BP, 25C2, 25DP2, 25S, 26, 2R45TS, 2R46TS...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | 5753 | 8 Cyl 5.8L | 351 |
- with 40, 60, 70 Amp Alternator
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1055.88
- 41.57
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1041.40
- 41
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
0180200, 03-1104699, 11720-00H00, 11720-B1101, 11720-L1102, 11A1040, 1239157, 13-413, 13411, 14001844, 14076310, 14082454, 141-1223, 15-410, 15-415, 15221-7253-3, 15410, 15415...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1979 - Ford Bronco | V | - | Alternator | 8 Cyl 6.6L | 400 |
- Autolite 25 Copper Spark Plug
- OE Style; Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Regular
- Core Nose Length:
- 0.726
- 18.44
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.431
- 10.95
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.374
- 60.3
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
18, 18S, 19157996, 22431, 22531, 2423, 25164640, 32221, 3851859, 3851861, 4339413, 44TS, 5024, 516484800, 5613191, 5613325, 5613673, 5613831...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | - | 8 Cyl 6.6L | 400 |
- Autolite 25 Copper Spark Plug
- Gap .044 (in); Auto
- Copper Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Regular
- Core Nose Length:
- 0.726
- 18.44
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.431
- 10.95
- Center Electrode Tip Material: Nickel
- Ground Electrode Tip Design: Standard
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.374
- 60.3
-
Features:
- The copper core center electrode aids in thermal control and improves resistance to fouling.
- Its specially engineered high nickel alloy center and ground electrode provides extended life.
- The high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Autolite® Copper spark plugs are engineered to deliver quick starts and the power your vehicle or applications needs to meet performance expectations.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | - | 8 Cyl 6.6L | 400 |
- For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | - | 8 Cyl 6.6L | 400 |
- For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;CARB E.O. D-550-34
- Electric Fuel Pump; For Use w/Carburetor; Domestic; 4-7 psi; 35 gph;
- Electric Fuel Pump
- Product Attributes:
- Maximum PSI: 7
- WARNING CA Proposition 65: Yes
- Fuel Type: Gasoline
- Fuel System Type: Carbureted
- Free Flow GPH: 35
- Item Weight: 0.750 Lbs.
-
Features:
- Solid-state Worry Free Electronics
- Internal Pressure Regulating
- Universal Design Allows For Easy Installation
- No Diaphragms Or Mechanical Parts To Wear Out
- They Make An Excellent Fuel Transfer Pump
- Gravity fed type pump with simple two-wire design. Works on 12 Volt negative ground systems only. Includes fittings and mounting hardware along with easy to follow DIY instructions. Pumps require approximately one amp average draw at maximum delivery. Flows 35 GPH (gallons per hours at 4-7 PSI (pounds per square inch). Universal design for most domestic 4, 6, & 8-cylinder carburetor applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | - | 8 Cyl 6.6L | 400 |
- with 9 (in) Ring Gear with Ford Axle
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009800102, 0009800302, 0009801102, 0009810380, 00098113005, 0009812905, 0009813005, 004-311-211, 007 981 53 05, 0079814105, 01820551, 04626490, 04626726, 04626737, 04864210, 05072493AA, 05072498AA, 05134464AA...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1979 - Ford Bronco | Rear |
- Thermocap™ Radiator Cap
- Silver; OEM Replacement w/Thermometer Built In; 16 psi
- Thermocap™ Radiator Cap; Silver; OEM Replacement w/Thermometer Built In; 16 psi;
- Thermocap(TM) Radiator Cap
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Indicates Coolant Temperature
- Helps To Prevent Coolant Injuries
- Integrated Coolant Reclamation Valve
- Improves Under-Hood Appearance
- Fits Most Domestic Vehicles
- Built-In Calibrated Thermometer
- Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | - | 8 Cyl 6.6L | 400 |
- Silver; OEM Replacement w/Thermometer Built In; 16 psi
- Thermocap™ Radiator Cap; Silver; OEM Replacement w/Thermometer Built In; 16 psi;
- Thermocap™ Radiator Cap
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Indicates Coolant Temperature
- Helps To Prevent Coolant Injuries
- Integrated Coolant Reclamation Valve
- Improves Under-Hood Appearance
- Fits Most Domestic Vehicles
- Built-In Calibrated Thermometer
- Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | - | 8 Cyl 6.6L | 400 |
- Thermocap™ Radiator Cap
- Silver; OEM Replacement w/Thermometer Built In; 16 psi
- Thermocap™ Radiator Cap; Silver; OEM Replacement w/Thermometer Built In; 16 psi;
- Thermocap(TM) Radiator Cap
- Product Attributes:
- WARNING CA Proposition 65: Yes
-
Features:
- Indicates Coolant Temperature
- Helps To Prevent Coolant Injuries
- Integrated Coolant Reclamation Valve
- Improves Under-Hood Appearance
- Fits Most Domestic Vehicles
- Built-In Calibrated Thermometer
- Knowing your coolant temperature can help to prevent burn injuries. Thermocap Cap, with its built-in calibrated thermometer, indicates the coolant temperature. This is useful information prior to cap removal. Never attempt to remove Thermocap Cap when the coolant temperature is very hot. The escaping hot coolant and steam may burn you. Reclamation valve works great with your coolant recovery system. Your radiator can reclaim coolant from your overflow bottle. Wide 30 degree to 270 degree F temperature range. Calibrated in centigrade and Fahrenheit. Color-coded temperature ranges.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1979 - Ford Bronco | V | - | 8 Cyl 6.6L | 400 |
Showing 1 - 10 of 64 products
Loading...