Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Chrysler Sebring | L | 2429 | 4 Cyl 2.4L | Base | 148 |
- Champion Double Platinum - Boxed - RE14PMPB
- Gap 0.040in; Plug Type RE14PMPB
- Champion Double Platinum Power 7570 Spark Plug (Carton of 4)
- Double Platinum Power
- Product Attributes:
- Hex Size:
- 0.625
- 15.880
- Center Electrode Tip Material: Platinum
- Seat Type: Tapered
- Electrical Terminal Type: Non-removable Nut
- Manufacturer Heat Range: 14
- Pre-Gap Size:
- 0.045
- 1.15
- Classification: Champion Double Platinum
- Ground Electrode Core Material: Platinum
- Plug Type: Re14pmpb
- Hex Size:
- Champion® Double Platinum Power™ spark plugs deliver more powerful performance. Featuring exclusive Heat-Active™ alloy, platinum fine wire center electrode and platinum pad ground electrode provide maximum life and sharper spark focus.
-
Suggested Purchase Quantity: 16
- Most jobs typically require 16 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
RE14PMPB, SPLZTR5A13
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chrysler Sebring | L | 2429 | 4 Cyl 2.4L | 148 |
- Autolite AP5263 Platinum Spark Plug
- Gap .050 (in)
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
19145286, 3032, 3570, 443, 4606402AD, 4997, 56028374AB, 570, FR8SPP30X, HGR7MDP0 , HGR7MQI0 , HGR7MQP0, HGR8MDP0 , HGR8MQI0 , HGR8MQP0, HR7MPP30X, HR8MPP30X, HR8SPP300V...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chrysler Sebring | V | 2736 | 6 Cyl 2.7L | 167 |
- Autolite AP5263 Platinum Spark Plug
- OE Style
- Platinum Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Nickel
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Platinum
- Ground Electrode Tip Design: Standard
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with a platinum firing tip that prevents gap erosion for longer service life.
- Its high alumina ceramic insulator provides thermal conductivity and superior insulation for increased strength.
- The multi-rib insulator prevents flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended life.
- Autolite® Platinum spark plugs are engineered with a platinum center electrode firing tip that provides improved performance and increased durability, making it a reliable choice for all older engine applications and designs. Its platinum design delivers quicker firing, smoother starts, for better acceleration, and improved fuel efficiency.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chrysler Sebring | V | 2736 | 6 Cyl 2.7L | 167 |
- Relief pressure 16 lb
- Safety Lever
This Part Fits the Following OEM/Substitute Numbers:
10330, 10330ST, 12R7S, 1678-290347, 17216, 380170, 7716, 9ST16, P7716, ST16
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chrysler Sebring | V | 2736 | 6 Cyl 2.7L | 167 |
- Electric Fuel Pump
- Product Attributes:
- Connector Gender: Female
- Voltage: 12.0
- Negative Ground: No
- Grade Type: Premium
- Mounting Hardware Included: Yes
- Fuel Type: Gas
- Connector Shape: Rectangle
- Minimum Pressure: 43
- Seal And Lock Ring Included: No
- Outlet Quantity: 1
- Maximum Amperage Draw: 6.0
- Inlet Outside Diameter: 11.0
- Average Flow Rating: 26.0
- Wire Quantity: 0
- Average Current Draw: 6.0
- Maximum Pressure: 94.0
- Fuel Sending Unit Included: No
- Pump Design: Turbine
- Outlet Outside Diameter:
- 0.313
- 7.9
- Terminal Quantity: 2
- Gasket Or Seal Included: No
- Wiring Harness Included: No
- Position(s): In-tank
- Terminal Type: Pin
- Terminal Gender: Male
- Regulator Included: No
- Internal Or External: Internal
- Strainer Included: No
- Delphi is a Tier 1 supplier to the majority of global vehicle manufacturers and has been a manufacturer of dependable fuel pumps and fuel delivery parts for over 80 years. With over 30 OE-proprietary innovations and 150 patents in fuel technologies, Delphi is regarded as a market leader in North American fuel management with sales coverage at over 95%. Learn more about our expert-led training programs and tech hotline at 1-877-463-3574. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.
This Part Fits the Following OEM/Substitute Numbers:
0K01A13350B, 0K01D-13-35Z, 0K24C-13-35ZA, 0K24T-13-35ZA, 0K29T-13-35ZA, 15100-50G00, 15100-50G10, 15100-54830, 15100-58B00, 15100-58B01, 15100-58B10, 15100-60G00, 15100-60G20, 15100-60G21, 15100-61A1V, 15100-61AA1, 15100-65D02, 15100-65D12...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Chrysler Sebring | L | 2429 | In-Tank | 4 Cyl 2.4L | 148 |
- GM 1/4" Screw Rivets
- Package Quantity: 6 Packaging Type: Clamshell
- Product Attributes:
- Head Diameter: 0.37
- Contenidos del paquete: 6 Remaches De Tornillo
-
Features:
- Comprehensive selection - Dorman offers a comprehensive line of quality nylon rivets for a range of applications, in a wide variety of sizes and styles
- Ensure fit - check product dimensions and styles to select the right assortment for your application
- Buy only what you need - conveniently packaged for any size automotive, commercial, industrial or household application
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- Dorman offers a comprehensive line of quality nylon rivets ideal for a range of applications and in a wide variety of sizes and styles. Manufactured from durable materials for reliable performance, these nylon rivets are packaged in a convenient assortment handy for any size automotive, commercial, industrial or household application.
This Part Fits the Following OEM/Substitute Numbers:
479710, 479710B, 6502871, 91502sm40000, n8039465, n803946s
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | Body | CID |
|---|---|---|---|---|---|---|
| 2006 - Chrysler Sebring | V | 2736 | 2 | 6 Cyl 2.7L | Convertible | 167 |
- Magnetic Crankshaft Position Sensor
- Packaging Type: Box
- Product Attributes:
- Terminal Type:
- Aspa
- Blade
- Contenidos del paquete: 1 Sensor
- Material:
- Metal
- Plastic
- Plástico
- Terminal Type:
-
Features:
- Direct replacement - this engine crankshaft position sensor is designed to match the fit and function of an original sensor on specified vehicles
- Ideal solution - engineered to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage
- Durable construction - designed and manufactured to strict specifications for reliable performance
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- This engine crankshaft position sensor is designed to match the fit and function of an original sensor to help ensure the engine control unit receives proper inputs when an original sensor has failed from heat or internal component damage.
This Part Fits the Following OEM/Substitute Numbers:
4609153AB, 4609153AC, 4609153AD, 4609153AE, 4609153AF, 4727451AA, 5S1413, CSS901, PC243, PC243T, S10179, SU3211
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Chrysler Sebring | V | 2736 | 6 Cyl 2.7L | 167 |
- with Chrysler 42LE Transmission
This Part Fits the Following OEM/Substitute Numbers:
0009808402, 02800485, 04626725, 04746979, 05086780AA, 05086780AB, 05086789AB, 05583609, 0927091, 09418356, 10117880, 1100036, 12479221, 1314774, 15286375, 153834, 15635197, 15665237...VIEW MORE
Additional Fitment Information:
| Vehicle | Transmission | Position | Trans. Speed |
|---|---|---|---|
| 2006 - Chrysler Sebring | Automatic | Right | 4 |
- Rivet-Nylon Assortment-1/4 In.
- Package Quantity: 6 Packaging Type: Clamshell
- Product Attributes:
- Color:
- Black
- Negro
- Noir
- Contenidos del paquete: 6 Remaches
- Material:
- Nailon
- Nylon
- Color:
-
Features:
- Comprehensive selection - Dorman offers a comprehensive line of quality nylon rivets for a range of applications, in a wide variety of sizes and styles
- Ensure fit - check product dimensions and styles to select the right assortment for your application
- Buy only what you need - conveniently packaged for any size automotive, commercial, industrial or household application
- Trustworthy quality - backed by a team of product experts in the United States and more than a century of automotive experience
- Dorman offers a comprehensive line of quality nylon rivets ideal for a range of applications and in a wide variety of sizes and styles. Manufactured from durable materials for reliable performance, these nylon rivets are packaged in a convenient assortment handy for any size automotive, commercial, industrial or household application.
This Part Fits the Following OEM/Substitute Numbers:
14992, 14993, 22538004, 452630, 465330, 465330B, 479570B, 479710, 479710BP, 6502871, 91502sm40000, n8039465, N803946S
Additional Fitment Information:
| Vehicle | Block | CC | Doors | Engine | Body | CID |
|---|---|---|---|---|---|---|
| 2006 - Chrysler Sebring | V | 2736 | 2 | 6 Cyl 2.7L | Convertible | 167 |
Showing 1 - 10 of 47 products
Loading...