Image
Product
Price
- 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;0.030 in. Plug Gap
- U-Groove Spark Plug Header Plug; 14mm Thread; .375 in Reach; Gasket Seat; 13/16 Hex; Projected Tip; Resistor; 8 Pack;
- U-Groove Spark Plug Header Plug
- Product Attributes:
- Hex Size: 0.1875 In.
- Reach: 0.375 In.
- Resistor: Yes
- WARNING CA Proposition 65: No
- Assembly Method: Gasket (flat)
- Projected Tip: Yes
- Gap Size: 0.035 In.
-
Features:
- Shorty Spark Plugs For Tubular Exhaust Headers
- Eliminates Dimpling Headers For Added Clearance
- Shorter Overall Plug Length Vs. OE Style Plug
- Copper Core Center Electrode
- Projected Tip
- Helps Eliminate Burned Spark Plug Boots
- Shorty Header Spark Plug
- ACCEL's patented race proven spark plugs in a Shorty configuration. The overall length has been reduced 3/16 in to 3/8 in (depending on the specific spark plug) to gain critical air gap between the spark plug boot and the exhaust manifold or header tube. This helps eliminate burning the spark plug boot or dimpling the header tube. The shorter spark plug length also can make it easier to install an remove the spark plugs in certain applications where there is not a lot of room to fit a socket or move a wrench around. ACCEL Shorty Spark Plugs are made with a Copper core which is a better conductor than Platinum and Iridium. They deliver a stronger spark especially in high performance applications where high combustion pressures are present. Copper is much better at dissipating heat than other materials which lessens the chance of a misfire. ACCEL Shorty Spark Plugs are gapable allowing you to open the gap exposing a larger flame kernel or close it if needed for high boost applications. All ACCEL Shorty Spark Plugs have machine rolled threads allowing for a more precise thread engagement and torque retention.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 1963 - Oldsmobile 98 | V | - | 8 Cyl 6.5L | Custom | 394 |
- Universal Joint Greaseable 1310 Series OSR
- with Outside Snap Rings 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension
- FSGR
- Product Attributes:
- Bearing Cap Type B: Osr
- Grease Type: N.l.g.i. Grade 2
- Model Number: Spicer 1310/spl22
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1963 - Oldsmobile 98 | Rear Driveshaft at Transmission |
- Universal Joint Greaseable 1310 Series OSR
- 1.062in Bearing Cap Diameter Greaseable with 3.219in Outside Snap Ring Dimension with Outside Snap Rings
- FSGR
- Product Attributes:
- Grease Type: N.l.g.i. Grade 2
- Bearing Cap Type B: Osr
- Model Number: Spicer 1310/spl22
- Snap Ring (2): 3.219
- Bearing Cap Finish: Ground
- Mounting Hardware Included: N
- Bearing Cap Type A: Osr
- Greaseable: Y
- Bearing Cap Diameter (1): 1.062
- Grease Fitting Location: One Straight Lube Fitting In Cross
- SR(1)Brng Cap to Brng Cap(OSR): 3.219
- Type: Osr Style
- Material: Steel
- Bearing Cap Diameter A (mm):
- 1.062
- 26.975
- Bearing Cap Type: Round
- Snap Ring (1): 3.219
- Length B (mm): 81.8
- SR(2)Brng Cap to Brng Cap(OSR): 3.219
- Pre Greased: N
- Seal Material: Rubber
- Grease Zerk Included: Y
- Coating Type: None
- Bearing Cap Diameter (2): 1.062
- OEM Mfg: Spicer
- OEM Series: 1310
- Bearing Cap Diameter B (mm):
- 1.062
- 26.975
- Seal Color/Finish: Black
- Snap Ring Included: Y
- Snap Ring Type: External
- Length A (mm): 81.8
-
Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
- When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02362830, 031468, 04371-04010, 04371-04020, 04371-0C010, 0437104010, 0437104020, 043710C010, 04723072, 051025Z1546, 051025Z3207, 055-0737, 06-06-1242, 1-0153, 1-0153G, 1-0154, 1-0200, 1-0278...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1963 - Oldsmobile 98 | Rear Driveshaft at Transmission |
Showing 1 - 3 of 3 products
Loading...