Shop By Product Matching "Steering"
Choose your Engine for your 1960 Ford P-100
Image
Product
Price
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1006
- 39.61
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 38.99
- 990
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
000067015321, 0059976892, 0070077, 0110037, 0116100, 016864, 0197810984, 0200085, 02032188, 027070553, 027100190, 027100190Y, 028410, 031104972, 035260849C, 0401393, 055260849C, 060518381...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1960 - Ford P-100 | L | 3655 | Power Steering | GAS | 6 Cyl 3.6L | 223 |
- Front Right Outer Steering Tie Rod End
- 3.22 (in) Length
- MOOG ES416R Front Right Outer Steering Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Clockwise
- Type: Straight
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 3.120
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1960 - Ford P-100 | Front Right Outer |
- Front Right Outer Steering Tie Rod End
- 3.22 (in) Length Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES416R Front Right Outer Steering Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Clockwise
- Type: Straight
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 3.120
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
03-81005, 11A3270, 180381M91, 269-2241, 310-140, 310-221, 310221, 381005, 401-1097, 401-1097B, 45A0097, 46A0097A, 534-756, 612.65009, 802-416R, A0AZ-3A130A, C1UZ-3A130A, C6TA3289C...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1960 - Ford P-100 | Front Right Outer |
- Front Steering Tie Rod End
- 3.22 (in) Length Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES416L Front Steering Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Counterclockwise
- Type: Straight
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 3.120
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-81034, 11A3271, 269-2068, 269-2085, 269-2240, 310-220, 310220, 346754C92, 381034, 401-1096, 401-1096B, 4011096B, 45A0096, 46A0096A, 534-755, 626.65304, 802-416L, 868292R91...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1960 - Ford P-100 | Front Left Outer |
- Front Steering Tie Rod End
- 3.22 (in) Length
- MOOG ES416L Front Steering Tie Rod End
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Counterclockwise
- Type: Straight
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.687
- Length - Stud Center to End: 3.120
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1960 - Ford P-100 | Front Left Outer |
- with 40 Amp Generator
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 38.57
- 979.68
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 38
- 965.20
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
01978-02W0001, 021-903-137A, 1.268.698, 1.288.475.4, 1.706.710, 1.706.711.4, 10A0965, 11720-69900, 11720-F2700, 11720-H7201, 11720-N9520, 11721-69900, 1174922, 11A0965, 1237098, 13-381, 13381, 14025234...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | CID |
|---|---|---|---|---|---|
| 1960 - Ford P-100 | L | 3655 | Fan and Power Steering | 6 Cyl 3.6L | 223 |
Showing 1 - 6 of 6 products
Loading...