Shop By Product Matching "Steering"
Choose your Engine for your 1971 Plymouth Cuda
Image
Product
Price
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 1119.38
- 44.07
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 1104.90
- 43.50
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
02-7106055, 11A1105, 13-435, 13434, 13435, 13438, 13440, 1374978, 14058790, 15-435, 15-437, 15-443, 15435, 15440, 15443, 1555585, 1565407, 15W435L...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1971 - Plymouth Cuda | V | 7211 | Power Steering | 8 Cyl 7.2L | V | 440 |
- Matte Black; Not Designed for Vehicles w/Air Bag or Telescopic Column or Radio Controls/Cruise Controls Mounted on Steering Wheel Grant Install Kits Are Necessary To Install A Grant Custom Steering Wheel
- Steering Wheel Installation Kit; Matte Black; Not Designed for Vehicles w/Air Bag or Telescopic Column or Radio Controls/Cruise Controls Mounted on Steering Wheel;
- Steering Wheel Installation Kit
-
Features:
- Complete Step By Step Instructions
- Die Cast Hubs Included
- Grade 5 Hardware
- Matte Black Trim Pieces
- This optional billet hub is available for the ultimate high end look and is intended to be used in place of the 4004 adapter and the standard hub. Included with the billet hub is a machined, highly polished billet aluminum hub featuring a five bolt pattern, step-by-step installation instructions and an emblem center cap, shipped without logo and contains a 1.5 in. emblem recess. See installation kit application guide for more information.
Additional Fitment Information:
| Vehicle |
|---|
| 1971 - Plymouth Cuda |
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .47
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1019
- 40.12
- Construction: Notched
- Cross Section Designation: Hc50
- Effective Length:
- 1003
- 39.5
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009975492, 0019972692, 0029971992, 0039975092, 0059975392, 007753012505, 01180848, 01904K7206, 0197810994, 0221500290, 0403396, 06097, 10001, 103828, 1051661, 107547, 11-9X1013, 11-9X1013SET...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1971 - Plymouth Cuda | V | - | Power Steering | GAS | 8 Cyl 7.0L | 426 |
- W/A.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1189
- 46.82
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1168
- 46
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0009972292, 0009972892, 0049971192, 0059977392, 0117300, 0221200, 0238994, 0241002, 026713, 027011252, 03-02-259-5, 03937789, 070903137, 10-01973, 10009102, 10009106, 1007, 1056470M1...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1971 - Plymouth Cuda | V | - | Fan and Power Steering | GAS | 8 Cyl 5.6L | 340 |
- W/43 1/8" Belt O.C.
- High Capacity V-Belt (Standard)
- Product Attributes:
- Top Width: .41
- Belt Material: Epdm
- Notched: Yes
- Outside Circumference:
- 1113
- 43.83
- Construction: Notched
- Cross Section Designation: Hc41
- Effective Length:
- 1092
- 43
- Strand Quantity: 1
- Type: High Capacity V-belt (standard)
- Cord Material: Polyester
-
Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
- Gates Automotive XL V-Belt is a durable, long-lasting replacement V-belt designed for the most demanding engine drives. Due to thermal forces in the vehicle engine, this variable notched belt tightens on the drive as it heats up to prevent slippage, improve belt performance and reduce noise.
-
Suggested Purchase Quantity: 3
- Most jobs typically require 3 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0119000, 0180200, 025903137, 027075152, 027106055Y, 0324410, 0334376, 0401438, 061546, 10430077350, 1080, 10A1090, 10A30895, 10AV1087, 10V1090, 10X1110, 10X1113, 1104303...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Fuel Type | Engine | CID |
|---|---|---|---|---|---|---|
| 1971 - Plymouth Cuda | V | 7211 | Power Steering | GAS | 8 Cyl 7.2L | 440 |
- w/o A.C.
- Product Attributes:
- Top Width: .44
- Outside Circumference:
- 38.57
- 979.68
- Color: Black
- Banded Belt: N
- Standards: Sae J636, Sae J637
- Effective Length:
- 38
- 965.20
- Belt Construction: Bottom Cog
- Minimum Operating Temperature:
- -35
- -37.2
- Material: Synthetic Rubber Compound
- Maximum Operating Temperature:
- 175
- 79.4
This Part Fits the Following OEM/Substitute Numbers:
01978-02W0001, 021-903-137A, 1.268.698, 1.288.475.4, 1.706.710, 1.706.711.4, 10A0965, 11720-69900, 11720-F2700, 11720-H7201, 11720-N9520, 11721-69900, 1174922, 11A0965, 1237098, 13-381, 13381, 14025234...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Position | Engine | Engine VIN | CID |
|---|---|---|---|---|---|---|
| 1971 - Plymouth Cuda | V | 5572 | Power Steering | 8 Cyl 5.6L | H | 340 |
- Front Inner Steering Tie Rod End
- with Left Hand Threads
- MOOG ES401L Front Inner Steering Tie Rod End for Dodge Challenger
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Counterclockwise
- Type: Bent
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.562
- Length - Stud Center to End: 4.000
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Plymouth Cuda | Front Inner |
- Front Inner Steering Tie Rod End
- with Left Hand Threads Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES401L Front Inner Steering Tie Rod End for Dodge Challenger
- Product Attributes:
- End 1 Threads Per Inch: 18
- End 2 Threads Per Inch: 20
- End 1 Thread Direction: Counterclockwise
- Type: Bent
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 0.562
- Length - Stud Center to End: 4.000
-
Features:
- ABSORBS IMPACT -- Belleville preload washer helps eliminate spring bind and shattering during shock load
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
03-83004, 0383004E, 269-2221, 310402, 3420155, 383004, 401-1080, 401-1080B, 4011080B, 41138, 45A0080, 46A0080A, 52303303, 531-531, 612.63008, 61363008, 802-401L, 8044026...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1971 - Plymouth Cuda | Front Inner |
Showing 1 - 8 of 8 products
Loading...