Image
Product
Price
- Front Left Outer Steering Tie Rod End
- MOOG ES3332R Front Left Outer Steering Tie Rod End for Honda Civic
- Product Attributes:
- End 2 Thread Pitch: 1.25
- Dust Boot Included: Yes
- End 2 Thread Diameter: 10.0
- End 1 Thread Direction: Clockwise
- Type: Bent
- Greaseable: Yes
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 14.0
- End 1 Thread Pitch: 1.5
- Length - Stud Center to End: 7.150
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 2014 - Honda Fit | Front Left Outer | GAS |
- Front Left Outer Steering Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES3332R Front Left Outer Steering Tie Rod End for Honda Civic
- Product Attributes:
- End 2 Thread Pitch: 1.25
- Dust Boot Included: Yes
- End 2 Thread Diameter: 10.0
- End 1 Thread Direction: Clockwise
- Type: Bent
- Greaseable: Yes
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 14.0
- End 1 Thread Pitch: 1.5
- Length - Stud Center to End: 7.150
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
03-54012, 07TR781, 101-4411, 269-2925, 2692925, 354012, 401-1588, 401-1588B, 4011588B, 45A0588, 46A0588A, 534-553, 53560 S04 013, 53560-SO4-003, 53560-SO4-013, 53560-SR0-A01, 53560-SR3-003, 53560-SRO-AO1...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 2014 - Honda Fit | Front Left Outer | GAS |
- Front Right Outer Steering Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES3331R Front Right Outer Steering Tie Rod End for Honda Civic
- Product Attributes:
- End 2 Thread Pitch: 1.25
- Dust Boot Included: Yes
- End 2 Thread Diameter: 10.0
- End 1 Thread Direction: Clockwise
- Type: Bent
- Greaseable: Yes
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 14.0
- End 1 Thread Pitch: 1.5
- Length - Stud Center to End: 7.150
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
03-54011, 07TR782, 101-4329, 269-2926, 2692926, 354011, 401-1589, 401-1589B, 4011589B, 45A0589, 46A0589A, 534-552, 53540 S04 013, 53540-SO3-003, 53540-SO3-013, 53540-SR0-A01, 53540-SR3-003, 53540-SRO-AO1...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 2014 - Honda Fit | Front Right Outer | GAS |
- Front Right Outer Steering Tie Rod End
- MOOG ES3331R Front Right Outer Steering Tie Rod End for Honda Civic
- Product Attributes:
- End 2 Thread Pitch: 1.25
- Dust Boot Included: Yes
- End 2 Thread Diameter: 10.0
- End 1 Thread Direction: Clockwise
- Type: Bent
- Greaseable: Yes
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 14.0
- End 1 Thread Pitch: 1.5
- Length - Stud Center to End: 7.150
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position | Fuel Type |
|---|---|---|
| 2014 - Honda Fit | Front Right Outer | GAS |
- Power Steering Oil Cooler
- Universal Fit Cooler
- Power Steering Oil Cooler
- Pwr Strg Oil Cooler
- Product Attributes:
- Depth IN: 0.750
- Height IN: 2.500
- Outlet Size IN: 0.375
- Connector Fitting: 3/8"
- Fittings Included?: Included
- Hose Length FT: 4.500
- Length IN: 9.000
- Gasket / Seals?: Not Included
- Mounting Hardware?: Included
- Description: Power Steering Oil Cooler
- Hose Size Number: 11/32
- Contains Spring?: Not Included
- Row Quantity: 2
- With Electric Fan?: Not Included
- O.E. Replacement?: No
- Bracket?: Not Included
- Material: Aluminum
-
Features:
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
- Ultrasonically soldered for reliability
- Compatible with OEM cooler systems
- Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Four Seasons.
This Part Fits the Following OEM/Substitute Numbers:
1009, 11153019, 13213, 14866, 1534157, 212, 241009, 53019, 6919, 77430, 911009, 979838, CWK911009
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2014 - Honda Fit | L | 1497 | 4 Cyl 1.5L | - |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- For ignition switch or lock assembly.
Additional Fitment Information:
| Vehicle | Sub Model |
|---|---|
| 2014 - Honda Fit | EV |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
- For OE Service tie rod ends.
Additional Fitment Information:
| Vehicle |
|---|
| 2014 - Honda Fit |
- Front Outer & Inner Steering Tie Rod End Kit For 2009-2014 Honda Fit KTR-105046
- TOR Front Outer & Inner Steering Tie Rod End Kit For 2009-2014 Honda Fit - Left Right Side (Driver Passenger) KTR-105046
- TOR
- Product Attributes:
- WebNameEbay4: For 2009-2014 Honda Fit Front Outer & Inner Steering Tie Rod End Kit
- ComponentsSummaryRegularWithBrands: 4x Tor Steering Tie Rod End
- ComponentsSummaryShort: 4x Tie Rod End
- ComponentsSummaryLongWithBrands: 2x Front Outer Tor Steering Tie Rod End (both Side) + 2x Front Inner Tor Steering Tie Rod End (both Side)
- WebNamePlain: Tor Front Outer & Inner Steering Tie Rod End Kit Ktr-105046
- ComponentsSummaryShortWithBrands: 4x Tor Tie Rod End
- NumberOfPieces: 4
- ComponentsSummaryLong: 2x Front Outer Steering Tie Rod End (both Side) + 2x Front Inner Steering Tie Rod End (both Side)
- WebNameLong: Tor Front Outer & Inner Steering Tie Rod End Kit For 2009-2014 Honda Fit - Left Right Side (driver Passenger) Ktr-105046
- WebNameShort: Front Outer & Inner Steering Tie Rod End Kit For 2009-2014 Honda Fit Ktr-105046
- ComponentsSummaryRegular: 4x Steering Tie Rod End
- WebNameRegular: Tor Front Outer & Inner Steering Tie Rod End Kit For 2009-2014 Honda Fit - Left Right Side (driver Passenger) Ktr-105046
- WebNameEbay2: [front] Outer & Inner Steering Tie Rod End Kit For 2009-2014 Honda Fit
- WebNameEbay3: Outer & Inner Steering Tie Rod End Front Kit For 2009-2014 Honda Fit
- WebNameEbay: Front Outer & Inner Steering Tie Rod End Kit For 2009-2014 Honda Fit Ktr-105046
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BES2946L BES3332R T3332PR TO59101XL T3332XL TO59101PR T3332 TO59101 GS60619 MES2946 MES2946L MES3332 GES2946L GES3332R MES3332R MS60619 ES2946 ES2946L ES3332 ES3332R ES800592 2692925 2693705 TES2946L TES3332R TES80
- Kit Includes: 2x Front Outer Steering Tie Rod End (Both Side) + 2x Front Inner Steering Tie Rod End (Both Side)
- Part Reference Numbers : BES2946L BES3332R T3332PR TO59101XL T3332XL TO59101PR T3332 TO59101 GS60619 MES2946 MES2946L MES3332 GES2946L GES3332R MES3332R MS60619 ES2946 ES2946L ES3332 ES3332R ES800592 2692925 2693705 TES2946L TES3332R TES80
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Honda Fit | Front |
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Honda Fit | Front Inner |
- Front Inner Steering Tie Rod End Pair For 2009-2014 Honda Fit KTR-104922
- TOR Front Inner Steering Tie Rod End Pair For 2009-2014 Honda Fit KTR-104922
- TOR
- Product Attributes:
- WebNameEbay4: For 2009-2014 Honda Fit Front Inner Steering Tie Rod End Pair
- ComponentsSummaryRegularWithBrands: 2x Tor Steering Tie Rod End
- ComponentsSummaryShort: 2x Tie Rod End
- ComponentsSummaryLongWithBrands: 2x Front Inner Tor Steering Tie Rod End (both Side)
- WebNamePlain: Tor Front Inner Steering Tie Rod End Pair Ktr-104922
- ComponentsSummaryShortWithBrands: 2x Tor Tie Rod End
- NumberOfPieces: 2
- ComponentsSummaryLong: 2x Front Inner Steering Tie Rod End (both Side)
- WebNameLong: Tor Front Inner Steering Tie Rod End Pair For 2009-2014 Honda Fit Ktr-104922
- WebNameShort: Front Inner Steering Tie Rod End Pair For 2009-2014 Honda Fit Ktr-104922
- ComponentsSummaryRegular: 2x Steering Tie Rod End
- WebNameRegular: Tor Front Inner Steering Tie Rod End Pair For 2009-2014 Honda Fit Ktr-104922
- WebNameEbay2: [front Inner] Steering Tie Rod End Pair For 2009-2014 Honda Fit
- WebNameEbay3: Steering Tie Rod End Front Inner Pair For 2009-2014 Honda Fit
- WebNameEbay: Front Inner Steering Tie Rod End Pair For 2009-2014 Honda Fit Ktr-104922
-
Features:
- TOR exclusive USA-engineered powdered metal gusher bearing design enables grease to flow through the bearing to the stud for reduced friction and enhanced strength and stability
- Premium cover plate design allows for tighter tolerances vs traditional cover plate designs, providing a more durable and extended life for the tie rod
- TOR engineered steel composition results in a stronger component. Our full-ball metal stud provides 36 degrees of smooth, consistent, rotational movement resulting in more responsive steering
- Full O.E. socket design with self-adjusting internal tension spring and high-strength polymer bearing
- Convenient easy access wrench flat allows for the use of a socket for easy installation and removal
- Manufactured with CNC tooling, automated grinding and assembly lines for increased consistency
- Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
- Part Reference Numbers : BEV800633 TI59130XL TI59130PR TI59130 GS60718 MS60718 EV800633 DS60718 2693714 TEV800633
- Kit Includes: 2x Front Inner Steering Tie Rod End (Both Side)
- Part Reference Numbers : BEV800633 TI59130XL TI59130PR TI59130 GS60718 MS60718 EV800633 DS60718 2693714 TEV800633
- TOR offers the most comprehensible suspension kits on the market. The unmatched performance and robustness coupled with longer lasting components make our supension parts the go-to choice for thousands of mechanical shops in North America. Designed, tested and certified by TOR certified engineers.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2014 - Honda Fit | Front Inner |
Showing 1 - 10 of 23 products
Loading...