Image
Product
Price
- Oil Filter
- H-2.875 in.; OD-2.688 in.; M20x1.5 Thread; psi Relief Valve 11-17
- K/N Wrench-Off oil filters are engineered to help ensure high flow rates and exceptional protection from contaminants. Each filter comes with a hex nut welded to the top of the canister; allowing for easy removal with a standard wrench.
- Performance Gold Oil Filter
- Product Attributes:
- Removal Nut Size: 1.000 In.
- WARNING CA Proposition 65: No
- Bypass Valve: Yes
- Item Weight: 0.600 Lbs. (0.2 Kg)
- Product Box Height: 3.630 In. (92mm)
- Filter Material: High Flow Premium Media
- Gasket Material: Viton Rubber
- Product Box Width: 3.160 In. (80 Mm)
- Package Material: Paperboard
- Product Box Length: 3.160 In. (80mm)
- PSI Relief Valve: 11-17
- Removal Nut: Yes
- Item Height: 2.875 In. (73mm)
- Package Type: Box
- Anti-Drain Back Valve: Yes
-
Features:
- OE Replacement Oil Filter
- 1 in. Exposed Nut Designed For Easy Oil Filter Removal
- Heavy Duty Construction For Extreme Conditions
- Anti-Drain Back Valve - Where Applicable - Eliminates Dry Starts
- K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N's pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers, and is protected by the K&N 1-Year Limited Warranty.
This Part Fits the Following OEM/Substitute Numbers:
1173228, 11930535150, 11930535151, 1321800010, 1520831UOB, 1520865F0C, 1520865F0E, 15208AA12A, 15208K010, 15400PFB004, 15400PFB014, 15400PJ7005, 15400PM3004, 15410MFJD01, 158332430, 1585332430, 1585399179, 1857444...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Legacy |
- Front Outer Steering Tie Rod End
- MOOG ES3712 Front Outer Steering Tie Rod End for Subaru Forester
- Product Attributes:
- End 2 Thread Pitch: 1.25
- Dust Boot Included: Yes
- End 2 Thread Diameter: 12.0
- End 1 Thread Direction: Clockwise
- Type: Bent
- Greaseable: Yes
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 14.0
- End 1 Thread Pitch: 1.5
- Length - Stud Center to End: 5.430
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Legacy | Front Outer |
- Front Outer Steering Tie Rod End
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG ES3712 Front Outer Steering Tie Rod End for Subaru Forester
- Product Attributes:
- End 2 Thread Pitch: 1.25
- Dust Boot Included: Yes
- End 2 Thread Diameter: 12.0
- End 1 Thread Direction: Clockwise
- Type: Bent
- Greaseable: Yes
- Part Description: Steering Tie Rod End
- End 1 Thread Diameter: 14.0
- End 1 Thread Pitch: 1.5
- Length - Stud Center to End: 5.430
-
Features:
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
101-4585, 269-3389, 2693389, 310-73935, 32006830, 32011432, 34141AA041, 34141AA042, 34141AC0109E, 34161SA000, 34161SA001, 401-2052B, 4012052, 45A1052, 46A1052A, 534-449, 534-716, 612.47026...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Legacy | Front Outer |
- Front Lower Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K9513 Front Lower Suspension Ball Joint for Subaru Outback
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Maximum Outside Diameter: 1.630
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: No
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-55001, 101-4105, 104141, 20206AJ000, 20206AN00A, 21067-GA050, 255001, 260-1402, 2601402, 32005903, 410-69062, 45D2183, 46D2183A, 505-1183, 505-1183B, 5051183B, 539-031, 610.47002...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Legacy | Front Lower |
- Front Lower Suspension Ball Joint
- MOOG K9513 Front Lower Suspension Ball Joint for Subaru Outback
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Maximum Outside Diameter: 1.630
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: No
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Legacy | Front Lower |
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10285948, 1078-290309, 10817, 10819, 10830, 10830D, 10834, 10834Y, 10837, 10869, 11817, 11830, 11834, 11834Y, 11837, 12335028, 12F46, 15001538...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Subaru Legacy | H | 2387 | 4 Cyl 2.4L | 146 |
- 3500 Pound Weight Carrying Capacity
- 3500 Pound Weight Carrying Capacity/ 350 Pound Tongue Weight
- Trailer Hitch Rear
- Product Attributes:
- Includes Ball Mount: No
- For Use With Roll Pan: No
- Cutting Required: No
- Class: Iii
- Weight Carrying Tongue Weight (LB): 350 Pound
- Color/ Finish: Black Gloss Powder Coated
- Prop 65 Y/N: Y
- Construction: Square Tube Welded
- Receiver Size (IN): 2 Inch
- Drilling Required: No
- Weight Carrying Capacity (LB): 3500 Pound
- Material: Steel
-
Features:
- Manufactured With A Vehicle Specific Design For A Custom Fit
- Precisely Welded For Superior Strength And Fit
- Co-Cured In A Rust-Resistant Liquid Bonderite (R) Coating
- Strengthened With A Welded, Seamless Collar
- Open-Back Receiver For Easy Cleaning
- Husky Towing Products offers a full line of unique hitch models to provide a custom fit for your vehicle. Husky Class III receiver hitches are engineered and rigorously tested to SAE J684 standards for safety. Each hitch is protected inside and out with an industry-leading rust-resistant finish.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Legacy |
- 3500 Pound Weight Carrying Capacity
- Class III Square Tube 2 Inch Receiver 3500 Pound Weight Carrying Capacity/ 350 Pound Tongue Weight
- Trailer Hitch Rear
- Product Attributes:
- Includes Ball Mount: No
- For Use With Roll Pan: No
- Cutting Required: No
- Class: Iii
- Weight Carrying Tongue Weight (LB): 350 Pound
- Color/ Finish: Black Gloss Powder Coated
- Prop 65 Y/N: Y
- Construction: Square Tube Welded
- Receiver Size (IN): 2 Inch
- Drilling Required: No
- Weight Carrying Capacity (LB): 3500 Pound
- Material: Steel
-
Features:
- Manufactured With A Vehicle Specific Design For A Custom Fit
- Precisely Welded For Superior Strength And Fit
- Co-Cured In A Rust-Resistant Liquid Bonderite (R) Coating
- Strengthened With A Welded, Seamless Collar
- Open-Back Receiver For Easy Cleaning
- Husky Towing Products offers a full line of unique hitch models to provide a custom fit for your vehicle. Husky Class III receiver hitches are engineered and rigorously tested to SAE J684 standards for safety. Each hitch is protected inside and out with an industry-leading rust-resistant finish.
Additional Fitment Information:
| Vehicle |
|---|
| 2023 - Subaru Legacy |
- Relief pressure 16 lb
- Standard
This Part Fits the Following OEM/Substitute Numbers:
10233, 10233ST, 12R8, 1350A730, 1640162090, 1678-29300, 17167, 1793282Z00, 214301P111, 253301P000, 253303K000, 253303Z000, 253304H000, 4495805, 45137AE003, 45137AE00B, 45137AE01A, 7516...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2023 - Subaru Legacy | H | 2387 | 4 Cyl 2.4L | 146 |
- Gray; Bench Seat Width 56 in.; Depth 19.5 in.; Back Height 22.5 in.
- Seat Protector; Gray; Bench Seat Width 56 in.; Depth 19.5 in.; Back Height 22.5 in.;
- Seat Protector
- Product Attributes:
- Seat Type: Bench
- Fabric: Polycotton
- WARNING CA Proposition 65: Yes
- WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm
-
Features:
- Durable Water Repellent Finish
- Stays In Place w/Durable Straps
- Non-Slip Bottom
- Semi-Custom Fit
- Quick And Easy Installation
- Easily Removable For Cleaning
- Machine Washable
- Designed To Fit Bench Style Rear Seats
- WeatherTech Seat Protectors are the perfect accessory for those vehicle owners needing an extra step of protection for their rear vehicle seating. A much needed accessory for the family road trip warriors or pet car ride companions to prevent scratches, damage or spills from ruining the seat surface. The Seat Protectors are made from a polycotton drill fabric that features a durable water-repellent finish that'll combat any juice box spill, cereal crumbs or pet mess! It's also engineered with an extra layer of nylon lining, which helps to further protect the covered seat. The Seat Protector stays in place with the help of durable straps, specialty inserts and a non-slip bottom. Semi–custom to fit the size and type of vehicle. Quick and easy installation, as well as easily removable for cleaning. The Seat Protector is machine washable, making it an easy accessory for any family. This product is for Rear seats only. Designed to fit most bench-style rear seats. Will not fit rear bucket seats.Available in black, tan and grey. Please note, you must have a headrest on the seatback of your vehicle for the Seat Protector to strap on to. Also, note that the on-screen color representations are not necessarily precise representations of actual product colors due to variance in monitor calibrations.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2023 - Subaru Legacy | Rear |
Showing 1 - 10 of 300 products
Loading...