Shop By Product Matching "Suspension"
Choose your Engine for your 1973 Chevrolet P10 Van
Image
Product
Price
- Gas Shock
- Recommended OEM Replacement
- Excel-G
- Product Attributes:
- Internal Rebound Spring: N
- Lower Mount Type: E2(12.8x35)
- Upper Mount Type: E2(16x35)
- Compressed Length: 9.76
- Dust Cover Included: Y
- Extended Length: 15.28
- Stroke Length: 5.51
- Internal Rebound Bumper: N
- Includes Bump Stop: N
-
Features:
- KYB recommended OEM replacement shock
- The KYB Excel-G helps restore the designed control and handling of your GM truck
- The KYB Excel-G uses a triple lip fluid seal to reduce the chance of oil and gas leaking out
- Vehicle specific, hand assembled in-house damping valves correctly manage tire contact, steering response and body movement
- Electronic safety systems depend on the suspension, brakes and tires operating as the vehicle manufacturer intended. The KYB Excel-G helps keep Electronic Safety Systems performing as designed.
- KYB has the strongest and thickest strut bodies and brackets in the industry
- minimizing flex to maintain correct alignment in all conditions
- Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
5850, G63355
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Chevrolet P10 Van | Front |
- Air Shock Single Fill Kit
This Part Fits the Following OEM/Substitute Numbers:
6L5Z18125ACA, 8L5Z18125AB, 8L5Z18125AJ, 8L5Z18125AK, AL5Z18125A, AL5Z18125AB, AL5Z18125AG, AL5Z18125AK, XW7Z18125BA
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Chevrolet P10 Van | Rear |
- Front Lower Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K6117T Front Lower Suspension Ball Joint for Chevrolet C10
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-86002, 02-86009, 10264, 1264K, 260-1118, 260-1118OS, 260-1130, 2601118, 286002, 286009, 305-119, 305119, 31025, 45D2021, 45D2022, 45D2429, 46D2021A, 505-1021...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Chevrolet P10 Van | Front Lower |
- Front Lower Suspension Ball Joint
- MOOG K6117T Front Lower Suspension Ball Joint for Chevrolet C10
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Chevrolet P10 Van | Front Lower |
- Front Upper Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K6136 Front Upper Suspension Ball Joint for Chevrolet C10
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 4
- Mounting Type: Bolt-on
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-86003, 0286003E, 10269, 1269K, 260-1127, 260-1268, 2601127FT, 28-600-3, 305-120, 305120, 305137, 31036, 45D0024, 46D0024A, 500-1024, 500-1024B, 5001024B, 52285666...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Chevrolet P10 Van | Front Upper |
- Front Upper Suspension Ball Joint
- MOOG K6136 Front Upper Suspension Ball Joint for Chevrolet C10
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 4
- Mounting Type: Bolt-on
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Chevrolet P10 Van | Front Upper |
- Front To Control Arm; Front To Frame Suspension Stabilizer Bar Bushing Kit
- 1-1/16 (in) Sway Bar Diameter OE Type Standard Design
- MOOG K6169 Front To Control Arm; Front To Frame Suspension Stabilizer Bar Bushing Kit for Chevrolet S10
- Product Attributes:
- Inside Diameter: 1.060
- Mounting Hardware Included: No
- Bushing Quantity: 2
- Bar Diameter: 1.060
- Material: Thermoplastic
- Part Description: Suspension Stabilizer Bar Bushing Kit
-
Features:
- PREMIUM MATERIALS -- Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Chevrolet P10 Van | Front To Frame |
- Front To Control Arm; Front To Frame Suspension Stabilizer Bar Bushing Kit
- 1-1/16 (in) Sway Bar Diameter OE Type Standard Design
- MOOG K6169 Front To Control Arm; Front To Frame Suspension Stabilizer Bar Bushing Kit for Chevrolet S10
- Product Attributes:
- Inside Diameter: 1.060
- Mounting Hardware Included: No
- Bushing Quantity: 2
- Bar Diameter: 1.060
- Material: Thermoplastic
- Part Description: Suspension Stabilizer Bar Bushing Kit
-
Features:
- PREMIUM MATERIALS -- Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
04-86500, 11176, 265-1377, 265-1979, 265-2175, 265-2178, 320110, 3927019, 45G0527, 45G0653, 46G0527A, 486500, 531-464, 550-1027, 550-1027B, 5501027B, 550115-3, 602.66023...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1973 - Chevrolet P10 Van | Front To Control Arm |
- Motor Mount Set
- Motor Mount Set; Red; Performance Polyurethane; Sold Individually;
- Red; Performance Polyurethane; Sold Individually
- Product Attributes:
- Prop 65 Warning Label: P65.png
- Prop 65 (C, R or CR): Cr
-
Features:
- Gains Both Performance And Longevity
- Will Handle Any And All Torque
- Out Lasts Rubber
- A true performance application component for cars, trucks, hot rods and racing/competition vehicles - yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors(R) vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex(TM) performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1973 - Chevrolet P10 Van | L | 4098 | 6 Cyl 4.1L | 250 |
- Motor Mount Set
- Motor Mount Set; Black; Performance Polyurethane; Sold Individually;
- Black; Performance Polyurethane; Sold Individually
- Product Attributes:
- Prop 65 Warning Label: P65.png
- Prop 65 (C, R or CR): Cr
-
Features:
- Gains Both Performance And Longevity
- Will Handle Any And All Torque
- Out Lasts Rubber
- A true performance application component for cars, trucks, hot rods and racing/competition vehicles - yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged for racing use. When required- a torque resistant safety interlock design is used that is comparable in strength to those too hard-running metal mounts. Replaces the original, short lived and typically too-soft rubber mounts and outdates those hard-running metal motor mounts. The popular early style mounts for General Motors(R) vehicles are available in either zinc or chrome metal finishes. Made of Hyper-Flex(TM) performance polyurethane. Resistant to under vehicle fluids such as: oils, coolants, road contaminants, etc.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1973 - Chevrolet P10 Van | L | 4098 | 6 Cyl 4.1L | 250 |
Showing 1 - 10 of 41 products
Loading...