Shop By Product Matching "Suspension"
Choose your Submodel for your 2002 Subaru Legacy
Image
Product
Price
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143059, 63620
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2002 - Subaru Legacy | Front | AWD |
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2002 - Subaru Legacy | Rear | AWD |
- Front Suspension Stabilizer Bar Link
- MOOG K80693 Front Suspension Stabilizer Bar Link for Subaru Outback
- Product Attributes:
- Bolt Length:
- 2.590
- 65.8
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Subaru Legacy | Front |
- Front Suspension Stabilizer Bar Link
- Design Allows Easier Installation
- MOOG K80693 Front Suspension Stabilizer Bar Link for Subaru Outback
- Product Attributes:
- Bolt Length:
- 2.590
- 65.8
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1014457, 1880693, 20420AA000, 20420AA001, 20420AA002, 20420AA003, 20420AA004, 265-2518, 2652518, 32005872, 45G1443, 46G1443A, 531-342, 550-1443B, 5501443, 606.47, 606.47000, 60747000...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Subaru Legacy | Front |
- Front Lower Suspension Ball Joint
- MOOG K9513 Front Lower Suspension Ball Joint for Subaru Outback
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Maximum Outside Diameter: 1.630
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: No
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Subaru Legacy | Front Lower |
- Front Lower Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K9513 Front Lower Suspension Ball Joint for Subaru Outback
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Maximum Outside Diameter: 1.630
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: No
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-55001, 101-4105, 104141, 20206AJ000, 20206AN00A, 21067-GA050, 255001, 260-1402, 2601402, 32005903, 410-69062, 45D2183, 46D2183A, 505-1183, 505-1183B, 5051183B, 539-031, 610.47002...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Subaru Legacy | Front Lower |
- Suspension Stabilizer Bar Link
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K80426 Suspension Stabilizer Bar Link for Subaru Outback
- Product Attributes:
- Bolt Length:
- 3.503
- 89.0
- Greaseable: Yes
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
18349, 1880448, 20470AE00A, 20470AE00B, 2651528, 46G0319A, 539-076, GK80426, JTS745, K80426, LS02019, MK80426, SL408, SL72015, SL72545, SL72545XL, TC2272
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Subaru Legacy | Rear |
- Suspension Stabilizer Bar Link
- MOOG K80426 Suspension Stabilizer Bar Link for Subaru Outback
- Product Attributes:
- Bolt Length:
- 3.503
- 89.0
- Greaseable: Yes
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Subaru Legacy | Rear |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
20254AE03A, NI
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Subaru Legacy | Rear Forward |
- Suspension Control Arm
- Product Attributes:
- Ball Joint Included:
- No
- Non
- Control Arm Type: Casting/forged
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Bushing Inside Diameter: 14.3
- Bushing Color:
- Black
- Negro
- Noir
- Articulación de rótula instalada: No
- Bushing Length: 92
- Bushing Outside Diameter: 39.6 Mm
- Bushings Included:
- Oui
- Sí
- Yes
- Control Arm Material:
- Acero
- Steel
- Finish:
- Powder Coated
- Revestimiento En Polvo
- Ball Joint Stud Type:
- Roscado
- Threaded
- Shape:
- Bent
- Doblado
- Tipo de brazo de control: Fundición/forjado
- End 2 Type:
- Presionar Hacia Adentro
- Press In
- Adjustable:
- No
- Non
- Color:
- Black
- Negro
- Noir
- Pre-Greased:
- No
- Non
- Construction:
- Casting/forged
- Fundición/forjado
- Distance Between Mounting Holes: 297
- Contenidos del paquete: Brazo De Control De Suspensión
- Ball Joint Installed:
- No
- Non
- Ball Joint Included:
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
20250AE041, 20250AE04A, 20250AE40, 2608493, 3CB10720, CMS101457, GS101457, LA72017, LA72017PR, NI, TC7041
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2002 - Subaru Legacy | Rear Left Upper |
Showing 1 - 10 of 75 products
Loading...