Shop By Product Matching "Suspension"
Choose your Submodel for your 2003 Chevrolet Venture
Image
Product
Price
- Strut-Mate Suspension Strut Mount
- Monroe Shocks & Struts Strut-Mate 902973 Suspension Strut Mount
- Monroe Strut-Mate Strut Mounting Kit
- Monroe® Strut-Mate® mounting kits are direct fit replacements designed to complement the ride control characteristics of Monroe® struts. In addition, our full line will provide you with late model original equipment coverage. When doing strut replacements, it is important to do the complete job. This means not only replacing the struts but also inspecting and replacing worn strut mounts. Remember, worn strut mounts can adversely affect a vehicle's safety and handling. Not only are strut mounts a necessary component of the suspension system, they consist of rubber to metal bonded parts that wear out over time as well. Worn bearings may also cause noise, steering binding, vibration and vehicle pull. Strut-Mate® mounting kits can include (as applicable by OE design): Strut Mount, Bearing, Upper Spring Isolator, Lower Spring Isolator, or Upper Spring Seat.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10257805, 10257806, 10257807, 10257808, 10288795, 10288796, 10363583, 10363584, 10398290, 10398291, 10410959, 10410960, 10410961, 10410962, 10422852, 10422853, 10445032, 10445033...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet Venture | Front |
- Ball Joint
- Bolt-On Type
- MOOG K5331 Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 3
- Castle Nut Included: Yes
- Mounting Type: Bolt-on
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
02-82021, 104257, 10443711, 15877580, 19202594, 22156822, 22157089, 25658244, 25663969, 25672871, 25676219, 25696335, 25699468, 25702222, 25703056, 25745394, 25745396, 25746325...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet Venture | Front Lower |
- Ball Joint
- Bolt-On Type Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K5331 Ball Joint
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 3
- Castle Nut Included: Yes
- Mounting Type: Bolt-on
- Greaseable: Yes
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet Venture | Front Lower |
- Stabilizer Bar Link Kit
- OE Type Includes Polyurethane Bushings and Solid Metal Sleeve for Enhanced Performance - Barrel Nut Allows for Easier Installation
- MOOG K700527 Stabilizer Bar Link Kit
- Product Attributes:
- Sleeve Length: 1.000
- End 1 Type: Bolt On
- Bolt Length: 4.750
-
Features:
- EASY TO INSTALL -- Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGHT TECHNOLOGY FOR THE REPAIR -- Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0K52Y2815XF, 10285683, 10403402, 2653295, 535-703, 537-075, MK90130, SL63015
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet Venture | Front |
- Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Sub Model | Drive Type |
|---|---|---|
| 2003 - Chevrolet Venture | Warner Bros. | FWD |
- Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2003 - Chevrolet Venture | Front | Warner Bros. | FWD |
- Control Arm Bushing
- Vertical Mount Patent Pending Socket Style Design for Increased Durability and Easier Installation
- MOOG K200787 Control Arm Bushing
- Product Attributes:
- Inside Diameter: 0.563
- Outside Diameter: 2.210
-
Features:
- SMOOTH ROTATION -- Exclusive ball and socket design allows for smooth rotational movement
- EASY TO INSTALL -- Design saves time during installation by aligning the bushing sleeve to insert the bolt
- LOW MAINTENANCE -- Bushing assembly is permanently lubricated and sealed with premium MOOG boot helps prevent contamination
- PREMIUM MATERIALS -- Made from high-quality polymer and steel compounds for durability and ride performance
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG Problem Solver vertical control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
531-226, BB90095, MK6712
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet Venture | Front Lower Forward |
- Suspension Ball Joint
- Product Attributes:
- Mounting Hardware Included: Yes
- Package Contents: 1 Ball Joint; 1 Castle Nut; 3 Nuts; 1 Cotter Pin
- Mounting Hole Quantity: 0
- Castle Nut Included: Yes
- Greaseable: No
- Cotter Pin Hole: Yes
- Dust Boot Material: Polychloroprene
- Attachment Type: Bolt-on
- Adjustable: No
- Stud Thread Diameter: 0.5
- Suspension Grade Type: Standard
- Bolts/Studs Included: Yes
- Bearing Material: Polymer
- Mounting Type: Bolt On
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension ball joint is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10443711, 4334578J00, 45D2259, 610.62013, FA2174, GK5331, JBJ7008, K-5331, K5331, MK5331, SK5331, TC1834
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet Venture | Front Lower |
- Support Bushing
- 1 Piece Bushing Original Design
- Product Attributes:
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Bushing
- Bushing 1 Width: 60 Mm
- Bushing 2 Inner Diameter: 12.2 Mm
- Length: 60
- Bushing 1 Outer Diameter: 39.3 Mm
- Bracket Included: No
- Bushing 2 Width: 66 Mm
- Bushing 1 Inner Diameter: 12.2 Mm
- Inside Diameter: 14.5
- Outside Diameter: 47
- Bushing 2 Outer Diameter: 39.3 Mm
- Bushing Quantity: 2
- Mounting Type: Bushing
-
Features:
- Direct replacement - fits and performs like the original equipment bushing on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10260991, 12800, 1403005, 45G9298, 602.66050, FB718, GK6715, JBU736, K6715, MK6715, TD4106W
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet Venture | Front Lower Rearward |
- Support Bushing
- Product Attributes:
- Grade Type: Regular
- Mounting Hardware Included: No
- Package Contents: 1 Bushing
- Bushing 1 Width: 60 Mm
- Bushing 2 Inner Diameter: 12.2 Mm
- Length: 55
- Bushing 1 Outer Diameter: 39.3 Mm
- Bracket Included: No
- Bushing 2 Width: 66 Mm
- Bushing 1 Inner Diameter: 12.2 Mm
- Inside Diameter: 14.2
- Outside Diameter: 70
- Bushing 2 Outer Diameter: 39.3 Mm
- Bushing Quantity: 2
- Mounting Type: Bushing
-
Features:
- Direct replacement - fits and performs like the original equipment bushing on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
10255029, 12799, 13-04572, 1403006, 45G9298, 602.62001, FB917, GK6712, JBU735, K200787, K6712, MK6712, SK6712, TD4361W
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2003 - Chevrolet Venture | Front Lower Forward |
Showing 1 - 10 of 109 products
Loading...