Image
Product
Price
- without Police Package For Towing & Hauling without Automatic Leveling System without Electronic Adjustable Suspension
- Air Shock Clip-On Fitting Single Fill Kit
This Part Fits the Following OEM/Substitute Numbers:
19121822, 19300074, 20759946, 20759947, 20759948, 20759949, 22064808, 22064809, 22811845, 22811846, 22811847, 25979393, 25979396, 88955460, 88955461
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Chevrolet Tahoe | Rear | LT |
- without Electronic Adjustable Suspension Recommended OE Application -Specific Replacement
- OESpectrum Light Truck Shock Absorber
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12476113, 12476445, 12477516, 12477517, 12477645, 12477646, 12477658, 12477659, 12477660, 12477661, 12477738, 15057972, 15770188, 15770189, 19300045, 19300046, 19300047, 22187151...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Chevrolet Tahoe | Front | LS |
- Front Lower Suspension Ball Joint
- 4.150 (in) Length Cast Iron Arm Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces New Pre-Installed Integral Dust Boot Allows For Ease Of Installation without Aluminum Steering Knuckles
- MOOG K6541 Front Lower Suspension Ball Joint for Chevrolet Silverado 1500
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.360
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104267, 104327, 12472819, 12475478, 15245582, 15922557, 19209396, 20869199, 20869200, 260-1528, 2601528, 410-94917, 45D2272, 46D2272A, 505-1272, 505-1272B, 533-015, 610.66017...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Chevrolet Tahoe | Front Lower |
- Front Lower Suspension Ball Joint
- 4.150 (in) Length Cast Iron Arm without Aluminum Steering Knuckles
- MOOG K6541 Front Lower Suspension Ball Joint for Chevrolet Silverado 1500
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.360
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Chevrolet Tahoe | Front Lower |
- Suspension Control Arm And Ball Joint Assembly
- w/Standard Bushings
- Product Attributes:
- Ball Joint Included:
- Oui
- Sí
- Yes
- Control Arm Type: Casting/forged
- Grade Type:
- Reemplazo Estándar
- Standard
- Mounting Hardware Included:
- Oui
- Sí
- Yes
- Mounting Hole Diameter: 12.3
- Mounting Hole Quantity:
- 1
- 1 Ensamble De Manguera Del Calentador
- Articulación de rótula instalada: Sí
- Bushings Included:
- Oui
- Sí
- Yes
- Control Arm Material:
- Hierro
- Iron
- Ball Joint Stud Type:
- Roscado
- Threaded
- Control Arm Maximum Length: 237
- Grease Fitting Included:
- No
- Non
- Tipo de brazo de control: Fundición/forjado
- Adjustable:
- No
- Non
- Pre-Greased:
- Oui
- Sí
- Yes
- Ball Joint Thread Diameter: 14
- Contenidos del paquete: Conjunto De Articulación De Rótula Y Brazo De Control
- Control Arm Color:
- Black
- Negro
- Noir
- Control Arm Maximum Width: 288.5
- Ball Joint Installed:
- Oui
- Yes
- Ball Joint Included:
-
Features:
- Trustworthy replacement - this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair - each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering - underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed - additional coatings offer long-lasting rust and corrosion resistance
- This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12475485, 15047200, 15864153, 2605308, 2605308M, 2643804, 45D1103, 4CB50026, 4CB50432, 502-1103, 622.66064, 623.66064, 810-95121B, CA165B, CAK80826, CB50026, CB90006, CB90006PR...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Chevrolet Tahoe | Front Upper |
- Front Upper Suspension Ball Joint
- Ball Joint Orientation Noted, Where Applicable
- MOOG K6540 Front Upper Suspension Ball Joint for Chevrolet Silverado 1500
- Product Attributes:
- Cotter Pin Hole: Yes
- Adjustable: No
- Mounting Hardware Included: Yes
- Suspension Grade Type: Standard
- Maximum Outside Diameter: 2.080
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- DESIGN CHANGE – New and improved follower ball joint design to extend product life and simplify installation
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104265, 12475485, 12475486, 260-1525, 2601525, 400-95560, 45D0103, 46D0103A, 500-1103, 500-1103B, 532-719, 539-028, 610.66029, 61166029, B6540, BJ90276, BJ90276RD, BJ90276XL...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Chevrolet Tahoe | Front Upper |
- Reflex Monotube Shock Absorber
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12476113, 12476445, 12477516, 12477517, 12477645, 12477646, 12477658, 12477659, 12477660, 12477661, 12477738, 15057972, 15061763, 15753521, 15756921, 15756924, 15756926, 15770188...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Sub Model | Drive Type |
|---|---|---|---|
| 2005 - Chevrolet Tahoe | Front | Z71 | 4WD |
- without Self Leveling Suspension without Electronic Adjustable Suspension Performance Monotube Shock Absorber
- Reflex Monotube Shock Absorber
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2005 - Chevrolet Tahoe | Front | LT |
- Front Upper Suspension Control Arm Bushing Kit
- Standard Design Kit Contains FRONT AND REAR BUSHING
- MOOG K6688 Front Upper Suspension Control Arm Bushing Kit for Chevrolet Silverado 1500
- Product Attributes:
- Inside Diameter: 0.560
- Mounting Hardware Included: No
- Dust Boot Included: No
- Bushing Quantity: 2
- Mounting Type: Press In
- Material: Steel Clad Rubber
- Part Description: Suspension Control Arm Bushing Kit
-
Features:
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS -- Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN -- Engineered to match or exceed OE requirements
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12787, 15727765, 23428561, 267-4457, 45G11074, 46G11074A, 532-573, 570-1074, 570-1074B, 602.66053, AK6669PR, BCK92010, BCK92010PR, DG5701074, FB12787, FB777, GS50416, JBU1355...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Chevrolet Tahoe | Front Upper |
- Front and Rear to Frame Suspension Stabilizer Bar Bushing Kit
- OE Type Standard Design
- MOOG K6408 Front and Rear to Frame Suspension Stabilizer Bar Bushing Kit for Chevrolet Silverado 1500
- Product Attributes:
- Inside Diameter: 1.130
- Mounting Hardware Included: No
- Bushing Quantity: 2
- Bar Diameter: 1.130
- Material: Thermoplastic
- Part Description: Suspension Stabilizer Bar Bushing Kit
-
Features:
- PREMIUM MATERIALS -- Made from high-quality thermoplastic material for durability and ride performance
- EXTENDED SERVICE LIFE -- Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
04-86506, 14071381, 224-317158, 265-2153, 45G0631, 46G0631A, 486506, 539-044, 550-1131B, 550113-1, 5501131B, 602.66027, BB6408, BB6408PR, DG5501131, E-6621-TU, E6621, FA7156...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2005 - Chevrolet Tahoe | Rear To Frame |
Showing 1 - 10 of 275 products
Loading...