Shop By Product Matching "Suspension"
Choose your Submodel for your 2006 Mitsubishi Lancer
Image
Product
Price
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143057, 63619
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2006 - Mitsubishi Lancer | Front | OZ Rally |
- Strut-Mate Strut Boot Kit
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143057, 143059, 5171132AB, 5171132AC, SB103, SB129
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2006 - Mitsubishi Lancer | Front | ES |
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
1015000, 2115006, 4056A037, 606.46026, JTS7638, K80374, MK80374, SL611, TC2616
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2006 - Mitsubishi Lancer | Rear | FWD |
This Part Fits the Following OEM/Substitute Numbers:
1014899, 2115007, 4056A015, 45G0440, 606.46013, GK80821, JTS7548, K750196, MS80821, SL-7820L, SL527, TC5091
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2006 - Mitsubishi Lancer | Front Left | AWD |
- Front Left; Rear Left Suspension Stabilizer Bar Link
- MOOG K80251 Front Left; Rear Left Suspension Stabilizer Bar Link for Ford Fusion
- Product Attributes:
- Bolt Length:
- 154.0
- 6.063
- Greaseable: Yes
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2006 - Mitsubishi Lancer | Rear Left | AWD |
- Front Left; Rear Left Suspension Stabilizer Bar Link
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces
- MOOG K80251 Front Left; Rear Left Suspension Stabilizer Bar Link for Ford Fusion
- Product Attributes:
- Bolt Length:
- 154.0
- 6.063
- Greaseable: Yes
- Part Description: Suspension Stabilizer Bar Link
- Bolt Length:
-
Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
- By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry's Problem Solver.
This Part Fits the Following OEM/Substitute Numbers:
101-4976, 1880251, 265-1663, 2651663, 3M8Z5K483L, 4056A027, 45G0454, 46G0454A, 521-477, 539-049, 545-1454, 545-1454B, 606.61022, 60761022, DG5451454, GJ6A34170A, GK2A34170, GK80251...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2006 - Mitsubishi Lancer | Rear Left | AWD |
- Jounce Bumper and Bellows
- Boot Kits
-
Features:
- Superior quality boot helps protect the strut shaft from leak-causing dirt and debris
- Poly foam bumper prevents the strut from bottoming out
- Built with design and quality that matches or exceeds OE
- Protects the upper seal and bushing
- KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
143064, 63629
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2006 - Mitsubishi Lancer | Rear | OZ Rally |
- Front Lower Suspension Ball Joint
- Includes Powdered-Metal Gusher Bearing To Allow Grease To Penetrate Bearing Surfaces Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in) Original Equipment (OE) Presses In From Below Requires Replacement Joint To Be Pressed In From Above Arm
- MOOG K500063 Front Lower Suspension Ball Joint for Jeep Patriot
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Mounting Hardware Included: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
104500063, 1601724, 260-1724, 2601724, 410-288442, 45D2401, 46D2401A, 505-1417, 505-1417B, 5105040AA, 5105040AB, 5105040AC, 5105040AD, 5105040AE, 5105040AF, 5105040AG, 5105040AH, 5105040AI...VIEW MORE
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2006 - Mitsubishi Lancer | Front Lower | Naturally Aspirated |
- Front Lower Suspension Ball Joint
- Fits OE Arm and Aftermarket Arms with Maximum Press-Fit Diameter of 1.571 (in)
- MOOG K500063 Front Lower Suspension Ball Joint for Jeep Patriot
- Product Attributes:
- Cotter Pin Hole: No
- Adjustable: No
- Mounting Hardware Included: No
- Suspension Grade Type: Standard
- Mounting Hole Quantity: 0
- Mounting Type: Press-in
- Greaseable: Yes
- Material: Neoprene
- Part Description: Suspension Ball Joint
-
Features:
- PROBLEM SOLVER® GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
- RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Position | Aspiration |
|---|---|---|
| 2006 - Mitsubishi Lancer | Front Lower | Naturally Aspirated |
- Suspension Control Arm Bushing
- Product Attributes:
- Wall Thickness: 23.8
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Bushing 1 Width: 66.2 Mm
- Color Code:
- Grey
- Gris
- Mounting Hole Diameter: 18.4
- Bracket Included:
- No
- Non
- Inside Diameter: 14.2
- Color:
- Black
- Negro
- Noir
- Distance Between Mounting Holes: 62.8
- Dust Boot Included:
- No
- Non
- Contenidos del paquete: 1 Buje
- Mounting Type:
- Buje
- Bushing
- Material:
- Caucho, Acero
- Rubber
- Steel
-
Features:
- Direct replacement - fits and performs like the original equipment bushing on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
BC82090PR, JBU182, K200254, K200800, K201357, MR403441, MS25441, MS80434, TD1253W, TD1621W, TD1987W
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2006 - Mitsubishi Lancer | Front Lower Rearward | FWD |
Showing 1 - 10 of 125 products
Loading...