Image
Product
Price
- Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2018 - Nissan Rogue Sport | AWD |
- Coil Capacity Increase 15-30 Percent; Fill Out Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.
- Coil SumoSprings; Coil Capacity Increase 15-30 Percent; Fill Out Coil SumoSprings Inspection before Ordering; Do Not Exceed GVWR; Inner Wall Height 1.68 in.;
- Coil SumoSprings
-
Features:
- Sold as a pair left and right
- Requires no maintenance
- Proudly made in the U.S.A.
- Fit Both Front And Rear Coil Springs
- Coil SumoSprings Simply Slide Between The Turns Of Coil Springs
- Enhance Front Suspension When Fitting Snow Plow/Winch/Bumper
- Enhance Rear Suspension When Adding Tow Hitch
- Reduces Side To Side Body Roll And Front End Dip
- Produced From SumoSprings Closed Cell Microcellular Urethane
- Progressive Spring Rate
- Coil Capacity Increased By 15 To 30 Percent
- Typical Installation Completed In Less Than 30 Minutes
- Never Load Any Vehicle Beyond The Manufacturers GVWR
- Coil SumoSprings(R) improve the load leveling ability of original equipment front and rear coil springs. Manufactured from micro-cellular urethane, the material's progressive spring rate creates a cushion effect, enhancing capacity and ride comfort. They install by simply being slid between the turns of the coil spring.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 2018 - Nissan Rogue Sport | Front | AWD |
- Stabilizer Bar Link
- Includes Greasable Socket Design to Reduce Corrosion and Wear
- MOOG K750784 Stabilizer Bar Link
- Product Attributes:
- Bolt Length:
- 11.760
- 298.7
- Greaseable: Yes
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
546684BA0C, MS30852, SL69131
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Rogue Sport | Front Left |
- Stabilizer Bar Link
- Includes Greasable Socket Design to Reduce Corrosion and Wear
- MOOG K750783 Stabilizer Bar Link
- Product Attributes:
- Bolt Length:
- 11.760
- 298.7
- Greaseable: Yes
- Bolt Length:
-
Features:
- EASY TO INSTALL -- Wrench flats ensure easy installation and removal
- GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT -- Sealed boot shields internal components from wear-causing contaminants
- STRONG AND DURABLE -- Thick connecting rod adds strength while metal bearings and rubber preload deliver long life
- PREMIUM MATERIALS -- Made from premium materials for long-lasting dependability
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
This Part Fits the Following OEM/Substitute Numbers:
546184BA0C, MS30853, SL69132
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Rogue Sport | Front Right |
- Control Arm and Ball Joint Assembly
- MOOG RK623111 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Pinch
- Control Arm Maximum Length: 13.267
- Grease Fitting Included: No
- Adjustable: No
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
1028043, 2608323, 524840, 545004BA0A, 545004CA0A, 545004CU0A, 545005HA0A, CB69264, CMS301168
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Rogue Sport | Front Right Lower |
- Control Arm and Ball Joint Assembly
- MOOG RK623110 Control Arm and Ball Joint Assembly
- Product Attributes:
- Ball Joint Stud Type: Pinch
- Control Arm Maximum Length: 13.267
- Grease Fitting Included: No
- Adjustable: No
- Ball Joint Mounting Type: Press In
- Control Arm Color: Black
- Bushing Material: Rubber
- Bushings Included: Yes
- Control Arm Material: Forged Steel
-
Features:
- EASY TO INSTALL -- Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING -- Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE -- Available for foreign and domestic nameplates
- INSTALLATION READY -- Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE -- Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH -- Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION -- Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
- MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
This Part Fits the Following OEM/Substitute Numbers:
1028042, 10285042, 2608269, 524839, 545014BA0A, 545014CA0A, 545014CU0A, 545015HA0A, CB69263, CMS301169
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Rogue Sport | Front Left Lower |
- Stabilizer Bar Link Kit
- Product Attributes:
- Spacer Included: No
- Grade Type: Regular
- Mounting Hardware Included: Yes
- Package Contents: 1 Link; 2 Nuts
- Length: 299
- Washers Included: No
- End 1 Type: Male Threaded
- Link Material: Steel
- End 1 Attachment Size : 12 Mm
- Bushings Included: Yes
- Greaseable: No
- Threaded End: Yes
- End 2 Type: Male Threaded
- Grease Fittings Included: No
- Locking Nuts Included: No
- Pre-Greased: No
- Sleeve Included: No
- Bolts Included: No
- Dust Boot Included: No
- Weight: 0.59 Lb
- Bolt Thread Size: 12
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
1016721, 2116033, 45G20775, 546681AA0A, 606.42082, GS30852, JTS1053, K750095, MS30852, SL-N150L, SL887, TC2165
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Rogue Sport | Front Left |
- Stabilizer Bar Link Kit
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension stabilizer bar link kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
This Part Fits the Following OEM/Substitute Numbers:
1016720, 2116034, 45G20776, 546181AA0A, 606.42083, GS30853, JTS1052, K750094, MS30853, SK750267, SL-N150R, SL888, TC2166
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Rogue Sport | Front Right |
- OESpectrum Suspension Strut
- ; Premium - Limited Lifetime Warranty
- Monroe Shocks & Struts OESpectrum 73075 Suspension Strut
- Monroe OESpectrum Strut
- Monroe® OESpectrum® shock absorbers and struts are available for popular for European, Asian and North American passenger cars, light trucks and SUVs featuring Tenneco’s latest global original equipment valving technologies designed with the right technology specific for each application. OESpectrum shocks and struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness. They are backed by Monroe’s Limited Lifetime Warranty and Feel the Difference™ Guarantee.
This Part Fits the Following OEM/Substitute Numbers:
E43024BA1C, E43024BA1D, E43024BA2C, E43024BF1C, E43024BF1D, E43024BF2B, E43025HA1B, E43025HA2B, E43025HA3A, E43025HL0A, E43034BA1C, E43034BA1D, E43034BA2C, E43034BF1C, E43034BF1D, E43034BF2B, E43035HA1B, E43035HA2B...VIEW MORE
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Rogue Sport | Front Left |
- This Original Equipment Manufacturer part is the same part that was made & installed by the car manufacturer at the factory where the car was produced.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2018 - Nissan Rogue Sport | Front |
Showing 1 - 10 of 54 products
Loading...