Image
Product
Price
- Weight Capacity 6000 lbs.
- Suspension Enhancement System; Weight Capacity 6000 lbs.; Rear;
- Suspension Enhancement System
- Product Attributes:
- Usage: Light Duty Truck
- Axle Style: N/a
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus GX460 | Rear |
- EIB Pro-Alignment Kits
- Eibach Pro-Alignment Front Kit for 03-09 Toyota 4Runner / 07-09 Toyota FJ Cruiser
- Camber/Caster Control Arm - Front Camber +/-2.0, Caster 0.0 to +4.0 degrees of adjustment.
- 2285
- Product Attributes:
- Adjustable: Camber Correction
-
Features:
- Improve droop travel, drivability and tire wear on lifted suspensions
- Offers +/-2 degrees of additional camber over factory.
- Built with an OE style ball joint.
- Hybrid Tubular and Forged Steel Design for on or off-road use
- Available in pairs
- Alignment kits are necessary when lifting or lowering vehicles because changes in the height of a vehicle can affect the alignment of its wheels. If a vehicle is lowered or lifted beyond a certain point, factory alignment specifications will not be achievable which can negatively effect handling. These alignment kits not only allow the adjustment of a vehicle’s camber back to factory specifications, but they also allow an experienced chassis tuner to utilize the increased adjustment range to achieve a more performance-oriented alignment.
Additional Fitment Information:
| Vehicle | Drive Type |
|---|---|
| 2022 - Lexus GX460 | AWD |
- Front Upper Suspension Control Arm Bushing
- MOOG K201804 Front Upper Suspension Control Arm Bushing for Toyota 4Runner
-
Features:
- HIGHLY PRECISE ENGINEERING -- Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS -- Made from high-quality elastomer compounds for durability and ride performance
- OE-STYLE DESIGN -- Engineered to match or exceed OE requirements
- RIGOROUS TESTING -- Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2671529, 4863260040, BCK74479, MS86411
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus GX460 | Front Upper |
- Suspension Control Arm
- wo/Level Control Suspension Sensor Bracket
- Product Attributes:
- Ball Joint Included:
- No
- Non
- Control Arm Type: Tubular
- Grade Type: Regular
- Mounting Hardware Included:
- No
- Non
- Bushing Inside Diameter: 14.3
- Bushing Color:
- Black
- Negro
- Noir
- Articulación de rótula instalada: No
- Bushing Length: 92
- Bushing Outside Diameter: 39.6 Mm
- Bushings Included:
- Oui
- Sí
- Yes
- Control Arm Material:
- Acero
- Steel
- Finish:
- Powder Coated
- Revestimiento En Polvo
- Ball Joint Stud Type:
- Roscado
- Threaded
- Shape:
- Recto
- Straight
- Tipo de brazo de control: Tubular
- End 2 Type:
- Presionar Hacia Adentro
- Press In
- Adjustable:
- No
- Non
- Color:
- Black
- Negro
- Noir
- Pre-Greased:
- No
- Non
- Construction: Tubular
- Distance Between Mounting Holes: 314
- Contenidos del paquete: Brazo De Control De Suspensión
- Ball Joint Installed:
- No
- Non
- Ball Joint Included:
-
Features:
- Direct replacement - fits and performs like the original equipment on specific vehicles
- Reliable fit - precision-engineered to match the design and dimensions of original components
- Durable construction - manufactured to strict standards using sturdy, safe materials
- Rigorously tested - thorough quality control measures ensure longevity
- This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
2CB86374, 4871060160, CA74536, CA74536PR, CMS861164, RK642452, TC6715
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus GX460 | Rear Upper |
- Strut Mount with Lower Bushing, Washers and Insulator
- w/o Adaptive Variable Suspension
- Mount Components
-
Features:
- The highest quality replacement strut mount available
- Optimizes suspension performance by offering Original Equipment quality replacement components designed for each application
- Superior rubber reduces noise, vibration and harshness
- Mount bearings provide smoother steering and help retain front end alignment
- Matched grade studs and nuts
- KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
4860904020, 4860960030, 4860960100, 90540A0002, 9094801056, 9094801100, 9094802159, 9094802161, 9094802205, 90948A2003, 90948T2003, 90948T2004, 909913
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Lexus GX460 | Front | Premium |
- Active Off Road Bumpstops;
- Active Off Road Bumpstops
- Product Attributes:
- WARNING CA Proposition 65: No
-
Features:
- Designed To Maximize Axle Travel
- Progressive Spring Rate
- Absorbs Energy
- Allows Smooth Axle Engagement
- Easy Installation
- Satisfaction Guarantee
- The Active Off-Road Bumpstops offer off-road enthusiasts greater control over their vehicles' suspension travel. Using progressive-rate springs means that instead of a hard stop at the end of axle travel the axle energy will be absorbed when bottoming-out producing smooth, predictable and quiet axle engagement and disengagement. Unlike the OEM bumpstops, Timbren uses superior natural rubber compound ensuring the Active Off-Road Bumpstops will continue to operate even after a lifetime of off-road abuse. Similar to our Timbren SES line, Active Off-Road Bumpstops carry a lifetime warranty and a satisfaction guarantee. The ABSTORSEQ replaces the rear bumpstops on the Toyota 4Runner, Toyota FJ Cruiser and the Toyota Landcruiser 100 Series. Install an off-road bumpstop kit and experience the difference.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus GX460 | Rear |
- B8 8100 - Suspension Shock Absorber
- Fits Vehicles With 0.5-1.5" Rear Lift Requires Rear Coil Spring Conversion
- 60mm Shock Absorber
- B8 8100
- Product Attributes:
- Internal Design: Monotube
- Upper Mount Type: Stem
- Reservoir: Yes
- Segment: Light Truck
- Body Design: 60mm Id Smooth Body (non-coilover)
- Spring Seat Included: No
- PartType: Shocks / Struts
- Collapsed Length (MM): 379.5
- Boot Included: No
- Lower Mount Type: Eye 19.2mm
- Adjustable Damping: Non-adjustable
- Body Diameter (ID): 60mm
- Prop 65 (Y/N): Y
-
Features:
- Direct fit for an easy installation
- 60mm large bore digressive piston offers a greater range of tunability and delivers exceptional comfort without sacrificing control
- 60mm remote reservoir offers increased oil capacity for consistent performance over rough terrain
- Bilstein B8 8100 reservoir shock absorbers are a large bore 60mm direct fit solution for lifted trucks and SUVs. Constructed from aerospace quality billet components, the large 60mm ID shock body offers a higher oil volume capacity to control heat while tackling rough road surfaces over long distances. Each B8 8100 offers a unique remote or piggyback reservoir solution for an easy, hassle free installation. These shock absorbers feature a monotube design for consistent fade free performance and utilize velocity sensitive digressive valve settings which are tuned for each specific application. The large 60mm piston design offers more comfort and control in all driving conditions. The Bilstein B8 8100 will allow you to tame the terrain in comfort.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
25001-125, 57810P
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Lexus GX460 | Rear | Luxury |
- KYB JAOS Suspension Lift Kit - (2 Boxes) Adjustable Struts, Springs and Mounts
- KYB JAOS Suspension Lift Kit w/o Adaptive Variable Suspension up to a 2 inch Lift
- KYB JAOS
-
Features:
- Complete kit includes two height adjustable front struts, two springs and two strut mounts
- 14 position dial adjustable damping
- Provides up to a 2 inch lift
- Designed for your Toyota
- Kit includes the spanner wrench for adjusting the spring seat
- The KYB JAOS Suspension Lift Kits provide up to a 2 inch lift as well as 14 position damping. The adjustable dial at the base of each shock and strut allows for 14 different rebound and compression settings. The 14 settings allow the user to manually adjust the suspension for vehicle loads, larger wheel and tires and road conditions. The front struts also have adjustable spring seats to allow height adjustments to the front of the vehicle. Each kit comes complete with two shocks or struts and two coil springs. It is recommended to utilize both front and rear kits when making this upgrade.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus GX460 | Front |
- Upper Control Arm Bolt
- Product Attributes:
- Bolt Grade: 10.9
- Washer Included:
- No
- Non
- SAE or Metric:
- Metric
- Métrico
- Thread Type:
- Fine
- Fino
- Thread Diameter: 14
- Contenidos del paquete:
- 1 Perno Del Brazo De Suspensión
- 1 Tuerca
- Head Drive Type:
- Hex
- Hexagonal
- Material:
- Acero
- Steel
-
Features:
- Ideal replacement - this control arm bolt is a direct replacement for a corroded, stripped or broken original equipment control arm bolt
- Durable construction - made of hardened steel to match the function and durability of the original part
- Cost-effective solution - offers original equipment quality at a competitive price
- Quality tested - this part has undergone material testing and validation to ensure proper fit and long service life
- Corroded, stripped or broken control arm bolt making suspension repair difficult. This new control arm bolt matches the fit and function of the original bolt, its hardened steel construction allowing for secure installation of the control arm.
This Part Fits the Following OEM/Substitute Numbers:
9008017208
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 2022 - Lexus GX460 | Front Upper |
- Control-arm-lower-inner-bushing
- Whiteline Suspension Control Arm Bushing.
- Front Lower Control Arm Inner Bushing Kit
- Product Attributes:
- Bushing 1 Inner Diameter: 16.2
- Grade Type: Regular
- Mounting Hardware Included: No
- Bushing 2 Inner Diameter: 21.5
- Bushing Quantity: 4 Bushings
- Bushing 1 Outer Diameter: 50.8
- Material: Polyurethane
-
Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Install guide included providing detailed instructions on how to install your new purchase .
- Internal grease reservoirs provide continual self-lubrication for optimum friction management.
- Precisely placed dampening voids further reduces harshness from sudden road inputs.
- Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
- Worn front control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline's advanced synthetic elastomer bushings with core characteristics ensuring superior elasticity, memory and outright durability for all forms of driving applications.
Additional Fitment Information:
| Vehicle | Position | Sub Model |
|---|---|---|
| 2022 - Lexus GX460 | Front Lower Inner | Premium |
Showing 1 - 10 of 71 products
Loading...