Shop By Product Matching "TT"
Choose your Engine for your 1986 Ford F-250
Image
Product
Price
- Weight Capacity 8000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 8000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Ford F-250 | Rear | 4WD |
- Weight Capacity 8000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 8000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1986 - Ford F-250 | Rear | 4WD |
- NGK G-Power Platinum Spark Plug
- Gap 0.044"
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Ur5gp
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ur5gp
- Resistor Type: Yes
- Stock Number: 3547
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.460
- 11.2
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1, 10, 19145283, 19145292, 19250960, 25164639, 3018, 3018-2, 3547, 41-803, 41-809, 41-817, 41-821, 4302, 4311, 4509, 4510, 4715...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford F-250 | V | 5753 | 8 Cyl 5.8L | 351 |
- Autolite XP24 Iridium XP Spark Plug
- Gap .044 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.597
- 15.16
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.431
- 10.95
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.274
- 57.76
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
4716, 7177, ITF20, ITF20TT, UR5IX
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford F-250 | V | 5753 | 8 Cyl 5.8L | 351 |
- Autolite XP25 Iridium XP Spark Plug
- Gap .044 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.726
- 18.44
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.431
- 10.95
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.374
- 60.3
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
2018, 4715, 7401, HR9BII33V, ITF16, ITF16TT, UR4IX
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford F-250 | V | - | 8 Cyl 7.5L | 460 |
- 160 deg.; Race Only
- High Performance Thermostat; 160 deg.; Race Only;
- High Performance Thermostat
- Product Attributes:
- Temperature: 160° F
- WARNING CA Proposition 65: Yes
- Diameter (in.): 2.120 In.
-
Features:
- High Performance
- Resists Variations In Coolant
- Brass and Copper Construction
- Opens At Right Temperature
- Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford F-250 | V | 5753 | 8 Cyl 5.8L | 351 |
- 160 deg.; Race Only
- High Performance Thermostat; 160 deg.; Race Only;
- High Performance Thermostat
- Product Attributes:
- Temperature: 160° F
- WARNING CA Proposition 65: Yes
- Diameter (in.): 2.120 In.
-
Features:
- High Performance
- Resists Variations In Coolant
- Brass and Copper Construction
- Opens At Right Temperature
- Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford F-250 | V | 5753 | 8 Cyl 5.8L | 351 |
- NGK Iridium IX Spark Plug
- Gap 0.044"
- Iridium IX Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Ur5ix
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ur5ix
- Resistor Type: Yes
- Stock Number: 7177
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.460
- 11.2
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
- NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode's durability is six times harder than platinum. Iridium alloy's extremely high melting point is perfect for today's engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1, 10, 2, 4448, 4502, 4716, 5330, 7177, AF42, ASF32P, H8BP, HGR9BQI, IFT16, ITF16, ITF20TT, SP501, V12YC, XP24...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford F-250 | V | 5753 | 8 Cyl 5.8L | 351 |
- Fuel Pump Mounting Gasket
- with Mechanical Fuel Pump
- FEL-PRO 6579 Fuel Pump Mounting Gasket for Jeep Grand Cherokee
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0951644, 10114141, 1400185, 1402421, 15002, 15010, 150101, 15060, 1630244, 1638383, 1730609, 2317497, 2401526, 2734213, 2843770, 3106497, 3174685, 3577870...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1986 - Ford F-250 | V | - | 8 Cyl 6.9L | 420 |
- Spark Plug Iridium TT
- Gap 0.040 Iridium TT - Ultimate Endurance and Power, 0.4mm Iridium and 0.7mm Platinum Twin-Tip Technology
- Spark Plug Iridium TT
- Spark Plug - Iridium TT
- Product Attributes:
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Center Electrode Core Material: Copper
- Hex Size: 16
- Reach: 11.6
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Platinum Twin-tip
- Manufacturer Heat Range: 16
- Ground Configuration: Twin-tip
- Pre-Gap Size: 1.0
- Resistance: 5000.0
- Ground Electrode Core Material: Nickel
- Thread Diameter: 14.0
- Durability of an OE style plug combined with Power & Torque of high performance.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
19208523, 19300383, 19300873, 19301654, 19302742, 19310656, 4289 155, 4715, 5613302, 5613794, 5613842, 5613867, 5613877, 5613935, 5613956, 5613957, 5614229, 5614243...VIEW MORE
Additional Fitment Information:
| Vehicle |
|---|
| 1986 - Ford F-250 |
Showing 1 - 10 of 17 products
Loading...