Shop By Product Matching "TT"
Choose your Engine for your 1997 Ford F-250 HD
Image
Product
Price
- Weight Capacity 8000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 8000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1997 - Ford F-250 HD | Rear | 4WD |
- Weight Capacity 8000 lbs.; Severe Service-Slide-In Camper Or Salt Spreader
- Suspension Enhancement System; Weight Capacity 8000 lbs.; Rear; Severe Service-Slide-In Camper Or Salt Spreader;
- Suspension Enhancement System
- Product Attributes:
- Usage:
- Heavy Duty Truck
- Medium Duty Truck
- Axle Style: N/a
- Usage:
-
Features:
- Eliminate Suspension Sag And Cushion Road Shock
- Reduce Sway And Improve Roll Stability
- Easy To Install With Basic Hand Tools
- Improves Roll Control
- Trouble And Maintenance Free
- Satisfaction Guarantee And Lifetime Warranty
- Used To Carry Heavy Cargo Or Towing Trailers
- Leaders In Rubber Spring Technology Since 1965
- Timbren Suspension Kits (SES Kits) are designed to enhance the suspension of your vehicle. Easiest to use: Rubber cushions absorb road shocks and automatically adjust to uneven loads or road conditions. Easiest to maintain: There are no airlines or fittings to allow leaks. Simply bolt the kit on and you are set for a lifetime of trouble free suspension.Easiest to install: There are no holes to drill, no airlines to route and SES Kits can be installed in a matter of minutes using basic hand tools. The softer ride quality of todays trucks and the mediocre suspensions found on most trailers can cause excessive trailer sway, instability and suspension settling.Timbrens high performance suspension packages will ensure added safety and peace of mind.
Additional Fitment Information:
| Vehicle | Position | Drive Type |
|---|---|---|
| 1997 - Ford F-250 HD | Rear | 4WD |
- NGK G-Power Platinum Spark Plug
- Gap 0.044" OE Equivalent Design
- G-Power Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Standard Replacement
- Service Number: Ur5gp
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ur5gp
- Resistor Type: Yes
- Stock Number: 3547
- Ground Electrode Tip Design: Trapezoid
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Platinum
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.460
- 11.2
- Center Electrode Tip Material: Platinum
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SINGLE PLATINUM TIP: Fine wire 0.6 millimeter platinum tip center electrode ensures improved durability and a consistently stable spark
- TRAPEZOIDAL CUT GROUND ELECTRODE: Reduces quenching design produces improved ignitability and performance
- COLD-ROLLED THREADS: Prevents cross-threading and damage to cylinder heads
- PLATINUM ALLOY: G-Power platinum provides exceptional value with increased performance and longer service intervals than factory nickel plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- RECOMMENDED USAGE: Lower cost alternative to double precious metal spark plugs or as an upgrade to OE nickel alloy spark plugs
- NGK G-Power Platinum spark plugs are the best single platinum spark plugs at an economical price. G-Power plugs feature a fine wire platinum center electrode and a trapezoidal cut ground electrode that offers increased durability, improved fuel efficiency, lower emissions, faster starts and quicker acceleration over conventional nickel spark plugs. An excellent upgrade for vehicles which used nickel alloy spark plugs originally. For better performance consider upgrading to a NGK Iridium IX plug. For even greater performance consider upgrading to a NGK RUTHENIUM HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1, 10, 19145283, 19145292, 19250960, 25164639, 3018, 3018-2, 3547, 41-803, 41-809, 41-817, 41-821, 4302, 4311, 4509, 4510, 4715...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Ford F-250 HD | V | 5753 | 8 Cyl 5.8L | 351 |
- Autolite XP24 Iridium XP Spark Plug
- Gap .044 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.597
- 15.16
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.431
- 10.95
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.274
- 57.76
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
4716, 7177, ITF20, ITF20TT, UR5IX
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Ford F-250 HD | V | 5753 | 8 Cyl 5.8L | 351 |
- Autolite XP25 Iridium XP Spark Plug
- Gap .044 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.726
- 18.44
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.431
- 10.95
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.374
- 60.3
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
2018, 4715, 7401, HR9BII33V, ITF16, ITF16TT, UR4IX
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Ford F-250 HD | V | - | 8 Cyl 7.5L | 460 |
- NGK Iridium IX Spark Plug
- Gap 0.044"
- Iridium IX Spark Plug
- Product Attributes:
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.16
- 4.0
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Grade Type: Performance
- Service Number: Ur5ix
- Ground Electrode Tip Material: Nickel
- Short Style Spark Plug: No
- Skirt: No
- Center Electrode Core Material: Copper
- Part Number: Ur5ix
- Resistor Type: Yes
- Stock Number: 7177
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- .040
- 1.0
- Ground Electrode Core Material: Nickel
- Material Grade: Iridium
- Center Electrode Projection: Mid Projection
- Seat Type: Tapered
- Ground Electrode Quantity: 1
- Insulator Material: Ceramic
- Hex Size: 5/8" (16mm)
- Reach:
- 0.460
- 11.2
- Center Electrode Tip Material: Iridium
- Skirt Length: 0.0
- Manufacturer Heat Range: 5
- Ground Configuration: J-gap
- Resistance: 5000.0
- Insulator Height:
- 2.07
- 52.5
- Thread Diameter:
- 0.551
- 14.0
-
Features:
- SINGLE IRIDIUM TIP: Fine wire 0.6 millimeter iridium tip center electrode ensures high durability and a consistently stable spark
- TRIVALENT METAL PLATING: Delivers superior anti-corrosion and anti-seizing properties, ensuring ease of installation and removal
- RECOMMENDED USAGE: Modified or high performance applications, or as an upgrade to OE nickel alloy spark plugs
- SOLID COPPER CORE: 98% pure copper core offers superior heat dissipation, conductivity and ultra wide heat ranges
- IRIDIUM ALLOY CENTER ELECTRODE: Iridium's density (6x that of platinum) and extremely high melting point is perfect for modern high efficiency engines
- TAPERED CUT GROUND ELECTRODE: Reduced quenching design produces outstanding ignitability, improved acceleration, fuel efficiency and durability
- NGK Iridium IX spark plugs are specifically designed for the performance enthusiast. Iridium IX provides outstanding acceleration, high fuel efficiency and durability. NGK Iridium IX plugs offer extreme ignitability and exceptional anti-fouling. Tapered cut ground electrode provides improved starting, idling and throttle response. The Iridium fine wire center electrode's durability is six times harder than platinum. Iridium alloy's extremely high melting point is perfect for today's engines. For even greater performance consider upgrading to an NGK Ruthenium HX plug.
-
Suggested Purchase Quantity: 8
- Most jobs typically require 8 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1, 10, 2, 4448, 4502, 4716, 5330, 7177, AF42, ASF32P, H8BP, HGR9BQI, IFT16, ITF16, ITF20TT, SP501, V12YC, XP24...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 1997 - Ford F-250 HD | V | 5753 | 8 Cyl 5.8L | 351 |
- Sold In Pairs
- Pro Fit Splashguards; Sold In Pairs; Model Num. 8;
- Pro Fit Splashguards
-
Features:
- Custom Look Universal Fit
- Large lip area conforms to fender flares and body panels
- Soft radi to follow body curves
- Protects vehicle from stonechips and road debris
- All season protection
- For DIY vehicle owners who enjoy the pride and confidence they feel from driving a vehicle that looks brand new, Roadsport Splash Guards provide high-quality, durable solutions to meet every need. Thats because RoadSport Splash Guards are designed with unbreakable materials and have a broad assortment for cars, trucks, SUVs, trailers and RVs so drivers can keep their vehicle looking like new.
Additional Fitment Information:
| Vehicle | Position | Bed |
|---|---|---|
| 1997 - Ford F-250 HD | Rear | Fleetside |
- Sold In Pairs
- Pro Fit Splashguards; Sold In Pairs; Model Num. 8;
- Pro Fit Splashguards
-
Features:
- Custom Look Universal Fit
- Large lip area conforms to fender flares and body panels
- Soft radi to follow body curves
- Protects vehicle from stonechips and road debris
- All season protection
- For DIY vehicle owners who enjoy the pride and confidence they feel from driving a vehicle that looks brand new, Roadsport Splash Guards provide high-quality, durable solutions to meet every need. Thats because RoadSport Splash Guards are designed with unbreakable materials and have a broad assortment for cars, trucks, SUVs, trailers and RVs so drivers can keep their vehicle looking like new.
Additional Fitment Information:
| Vehicle | Position | Bed |
|---|---|---|
| 1997 - Ford F-250 HD | Front | Fleetside |
- Sold In Pairs
- Pro Fit Splashguards; Sold In Pairs;
- Pro Fit Splashguards
-
Features:
- Factory Fit Appearance
- Contoured For Enhanced Styling And Full Protection
- Guaranteed To Be Unbreakable Down To -40F
- Complete With Corrosion-Resistant Mounting Hardware
- Seven Models Fit Virtually All Of The Popular Vehicles
- Incredibly Good Fit And Original Equipment Appearance
- Sold In Pairs
- RoadSport(TM) Pro Fit(TM) Splashguards are engineered to fit all cars, trucks, vans, SUVs and Crossover vehicles with a factory fit appearance. Seven different models work with virtually all the most popular makes and model vehicles on the road today. Simply select the model number from the application guide and cross it to an ordering number if ordering on-line. Pro Fit(TM) provides full protection and enhanced styling. Seven basic profiles work with virtually all makes and models of contemporary vehicles. Factory-fit appearance. Contoured for enhanced styling and full protection. Guaranteed to be unbreakable down to negative 40 degrees Fahrenheit. Complete with corrosion-resistant mounting hardware. Seven models fit virtually all of the popular vehicles on the road today with an incredibly good fit and original equipment appearance. Sold in pairs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Ford F-250 HD | Front |
- Sold In Pairs
- Pro Fit Splashguards; Sold In Pairs;
- Pro Fit Splashguards
-
Features:
- Factory Fit Appearance
- Contoured For Enhanced Styling And Full Protection
- Guaranteed To Be Unbreakable Down To -40F
- Complete With Corrosion-Resistant Mounting Hardware
- Seven Models Fit Virtually All Of The Popular Vehicles
- Incredibly Good Fit And Original Equipment Appearance
- Sold In Pairs
- RoadSport(TM) Pro Fit(TM) Splashguards are engineered to fit all cars, trucks, vans, SUVs and Crossover vehicles with a factory fit appearance. Seven different models work with virtually all the most popular makes and model vehicles on the road today. Simply select the model number from the application guide and cross it to an ordering number if ordering on-line. Pro Fit(TM) provides full protection and enhanced styling. Seven basic profiles work with virtually all makes and models of contemporary vehicles. Factory-fit appearance. Contoured for enhanced styling and full protection. Guaranteed to be unbreakable down to negative 40 degrees Fahrenheit. Complete with corrosion-resistant mounting hardware. Seven models fit virtually all of the popular vehicles on the road today with an incredibly good fit and original equipment appearance. Sold in pairs.
Additional Fitment Information:
| Vehicle | Position |
|---|---|
| 1997 - Ford F-250 HD | Rear |
Showing 1 - 10 of 11 products
Loading...