Shop By Product Matching "TT"
Choose your Submodel for your 2006 Jeep Wrangler
Image
Product
Price
- Autolite AI5263 Iridium Ultra Spark Plug
- Gap .040 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12597464, 12598004, 12607280, 12611882, 12622561, 12681660, 19185438, 41-102, 41-103, 41-105, 41-107, 41-108, 41-109, 41-118, 41-990, 6509, 6728, 9300...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Jeep Wrangler | L | - | 4 Cyl 2.4L | 148 |
- Fuel Pump Mounting Gasket
- FEL-PRO 6579 Fuel Pump Mounting Gasket for Jeep Grand Cherokee
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
This Part Fits the Following OEM/Substitute Numbers:
0951644, 10114141, 1400185, 1402421, 15002, 15010, 150101, 15060, 1630244, 1638383, 1730609, 2317497, 2401526, 2734213, 2843770, 3106497, 3174685, 3577870...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Jeep Wrangler | L | - | 6 Cyl 4.0L | 242 |
- Fuel Pump Mounting Gasket
- FEL-PRO 6579 Fuel Pump Mounting Gasket for Jeep Grand Cherokee
- Product Attributes:
- Grade Type: Premium
-
Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
- Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
-
Suggested Purchase Quantity: 2
- Most jobs typically require 2 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Jeep Wrangler | L | - | 6 Cyl 4.0L | 242 |
- Autolite XP5263 Iridium XP Spark Plug
- Gap .040 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Tapered
- Washer Included: No
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.571
- 14.5
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 0.982
- 24.94
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Manufacturer Heat Range: 11
- Pre-Gap Size:
- 0.04
- 1.02
- Resistance: 4000
- Insulator Height:
- 2.192
- 55.68
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
- This item must be purchased in quantities of 4
This Part Fits the Following OEM/Substitute Numbers:
1119A-78J00-000, 1119A7-8J00, 12597464, 12598004, 12607280, 12611882, 12617309, 12620540, 12622561, 12625058, 12625661, 12681660, 19185438, 41-102, 41-103, 41-105, 41-107, 41-108...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2006 - Jeep Wrangler | L | - | 4 Cyl 2.4L | 148 |
- 2.5 in. Lift Aftermarket Wheels Are Recommended~Install Time 2-3 Hours~Includes The Following Parts~Coil Springs
- Suspension Lift Kit; 2.5 in. Lift;
- Suspension Lift Kit
- Product Attributes:
- Lift/Drop Height: 2.5 In.
- WARNING CA Proposition 65: No
-
Features:
- Clears Up To 31 in. Tires
- Easy Bolt-On Installation
- Increased Ground Clearance
- Levels The Front w/The Rear Of The Jeep
- Springs Are Progressive Rate For Enhanced Ride Quality
- Who says your daily driver and your weekend warrior cant be the same vehicle? The 2.5-inch Suspension Kit for Jeep TJ was engineered by Rough Countrys Research and Development Team to give the perfect blend of off-road performance and smooth highway ride.?á
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2006 - Jeep Wrangler | L | - | 6 Cyl 4.0L | 65th Anniversary Edition | 242 |
- WIX Spin-On Lube Filter
- Original Equipment Part Number 4105409 Also Available In Master Pack Version ; Manufacturer OE Recommended Oil Change Intervals
- Product Attributes:
- Inner Diameter Top: Closed
- Outer Diameter Top: 2.921
- Burst Pressure: 275
- Duty Type: Ld
- Micron: 21.00
- BetaRatio: 2/20=6/20
- Bypass Relief Valve Setting: 8-11
- Flow Rate: 7-9 Gpm
- Media Material: Enhanced Cellulose
- Class: A
- Anti-Drain Back Valve: Yes
- Use Wix Premium For Severe Driving -Ideal match for synthetic and high mileage motor oils -Meets of exceeds OE recommended change intervals – up to 15,000 miles -Synthetic blended media provides 99% dirt trapping efficiency -Silicone anti-drainback valve prevents dry starts -Superior performance in stop and go and heavy traffic -Performs well for routine towing -High capacity – ideal for dirty and dusty environments -Long life, tight-fitting gasket -Solid metal end caps provide positive seal.
This Part Fits the Following OEM/Substitute Numbers:
0 451 103 262, 0 986 452 003, 0 986 452 019, 0 986 452 027, 0 986 452 035, 0 986 452 038, 0 986 452 044, 0 986 AF0 055, 0 986 AF0 138, 0 986 AF0 207, 0 986 AF1 046, 0 986 AF1 073, 0 986 AF1 078, 0 986 AF1 129, 00013504996, 0060290915004, 0122-0645, 019005200039...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Region | Engine | CID |
|---|---|---|---|---|---|
| 2006 - Jeep Wrangler | L | - | Mexico | 4 Cyl 2.4L | 148 |
- JEEP BEDTRED 97-06 TJ/LJ FRNT 3PC FLR KIT (W/O CNTR CNSL) - HT SHLDS *SPEC ORDR*
- 3 pc.; 2 piece Front; 1 piece Rear; Replaces Factory Carpet Kit; w/o Center Console; Includes Heat Shields Special Order Only
- BedTred Floor Kit; 3 pc.; 2 piece Front; 1 piece Rear; Replaces Factory Carpet Kit; w/o Center Console; Includes Heat Shields;
- Product Attributes:
- Install: No Drill, Hook & Loop
- Features and Benefits:
- 100% Waterproof; Will Not Mold Or Mildew
- 3 Year Limited Warranty
- Easy To Install; Remove And Clean
- Excellent Heat And Noise Insulation
- High End Rugged Spray In Look
- Installs Quickly No Need To Remove Seat Bracket Or Center Console
- No Sanding/prepping/damage Installation
- Tough 1/4 In Cushioned Liner
- Console: Without Console
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Mounting Hardware Included: Yes
- Category: Jeep Kits - Bedtred
- Kit Options: Front Only (3 Pc)
- Cutting Required: No
- Mounting: Front & Rear Floor Area
-
Features:
- High End Rugged Spray In Look
- No sanding,prepping and damage installation. Installs quickly no need to remove seat bracket or center console. Custom contoured fitment for a snug tight finish.Heavy duty 1/4in. textured anti skid finish. Thick foam layer provides superior dent protection. Cushioned knee friendly surface.Non-woven fiber backing will not scratch jeep floors. Limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2006 - Jeep Wrangler | United States | X |
- JEEP BEDTRED 97-06 TJ/LJ FRONT 3PC FLR KIT (W CNTR CNSL) - HT SHLDS
- 3 pc.; 2 piece Front; 1 piece Rear; Replaces Factory Carpet Kit; w/Center Console; Includes Heat Shields
- BedTred Floor Kit; 3 pc.; 2 piece Front; 1 piece Rear; Replaces Factory Carpet Kit; w/Center Console; Includes Heat Shields;
- Product Attributes:
- Install: No Drill, Hook & Loop
- Features and Benefits:
- 100% Waterproof; Will Not Mold Or Mildew
- 3 Year Limited Warranty
- Easy To Install; Remove And Clean
- Excellent Heat And Noise Insulation
- High End Rugged Spray In Look
- Installs Quickly No Need To Remove Seat Bracket Or Center Console
- No Sanding/prepping/damage Installation
- Tough 1/4 In Cushioned Liner
- Console: With Console
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Mounting Hardware Included: Yes
- Category: Jeep Kits - Bedtred
- Kit Options: Front Only (3 Pc)
- Cutting Required: No
- Mounting: Front & Rear Floor Area
-
Features:
- High End Rugged Spray In Look
- No sanding,prepping and damage installation. Installs quickly no need to remove seat bracket or center console. Custom contoured fitment for a snug tight finish.Heavy duty 1/4in. textured anti skid finish. Thick foam layer provides superior dent protection. Cushioned knee friendly surface.Non-woven fiber backing will not scratch jeep floors. Limited lifetime warranty.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2006 - Jeep Wrangler | United States | X |
- JEEP BEDTRED 97-06 JEEP TJ 97-06 REAR 4PC CARGO KIT (INCLUDES TAILGATE)
- 4 pc.; Includes Driver [LH] Panel; Pass. [RH] Panel; Cargo Area; Tailgate; Replaces Factory Carpet Kit
- BedTred Cargo Kit; 4 pc.; Includes Driver [LH] Panel; Pass. [RH] Panel; Cargo Area; Tailgate; Replaces Factory Carpet Kit;
- Product Attributes:
- Install: No Drill, Hook & Loop
- Features and Benefits:
- 100% Waterproof; Will Not Mold Or Mildew
- 3 Year Limited Warranty
- Easy To Install; Remove And Clean
- Excellent Heat And Noise Insulation
- High End Rugged Spray In Look
- Installs Quickly No Need To Remove Seat Bracket Or Center Console
- No Sanding/prepping/damage Installation
- Tough 1/4 In Cushioned Liner
- Meets or Exceeds Original Equipment Manufacture Specifications: Yes
- Mounting Hardware Included: Yes
- Category: Jeep Kits - Bedtred
- Kit Options: Rear Only (4 Pc)
- Cutting Required: No
- Mounting: Cargo & Tailgate Area
-
Features:
- High End Rugged Spray In Look
- This fully custom-molded die cut system provides a rugged spray-in look in minutes without the need of any labor intensive prepping or removal of seat brackets or center console. Sold as a 3pc front and 4pc rear, individual pieces can be quickly removed and hosed off after a long day on the trail if desired. The BedTred material is 100 waterproof, wont absorb water, and will never stain, stink, mold or mildew; dries quickly and resists all harsh chemicals. The 1/4-inch polypropylene foam kit, with provided heat shields, insulates your interior from road noise and heat.
Additional Fitment Information:
| Vehicle | Region | Sub Model |
|---|---|---|
| 2006 - Jeep Wrangler | United States | X |
- JEEP TAILGATE BEDTRED 97-06 JEEP TJ/LJ Tailgate Mat
- BedTred Tailgate Mat;
- Product Attributes:
- Surface Preparation Required: Yes
- Install: No Drill, Hook & Loop
- Surface Configuration: Smooth
- Mounting Hardware Included: Yes
- Chemical Resistant: Yes
- Configuration: One Piece
- Mounting: Tailgate Area
- Impact Resistant: Yes
- Features and Benefits:
- 100% Waterproof; Will Not Mold Or Mildew
- 3 Year Limited Warranty
- Easy To Install; Remove And Clean
- Excellent Heat And Noise Insulation
- High End Rugged Spray In Look
- Installs Quickly No Need To Remove Seat Bracket Or Center Console
- No Sanding/prepping/damage Installation
- Tough 1/4 In Cushioned Liner
- Instruction Manual Included: Yes
- Category: Jeep Tailgate - Bedtred
- Paintable: No
- Drilling Required: No
-
Features:
- High End Rugged Spray In Look
- Get added protection with the BedTred Tailgate Mat. Works with either style, and easily installs with hook and loop fasteners.
Additional Fitment Information:
| Vehicle | Region |
|---|---|
| 2006 - Jeep Wrangler | United States |
Showing 1 - 10 of 11 products
Loading...