Image
Product
Price
- Autolite AI5684 Iridium Ultra Spark Plug
- OE Style
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.672
- 17.07
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
This Part Fits the Following OEM/Substitute Numbers:
12568387, 22401-6CA1C, 22401-6LD1C, 3439, DILKAR6A11, FXE20HR11, IXEH20ETT, IXEH20TT, REA12WMB4, VR8NII35U
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Toyota Camry | L | 2487 | 4 Cyl 2.5L | 152 |
- Autolite AI5684 Iridium Ultra Spark Plug
- Gap .040 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.15
- 3.81
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.672
- 17.07
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 14
- Reach:
- 1.043
- 26.49
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.012
- 51.1
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 4
- Most jobs typically require 4 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Toyota Camry | L | 2487 | 4 Cyl 2.5L | 152 |
- Autolite AI5325 Iridium Ultra Spark Plug
- OE Style
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.465
- 11.81
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 1.05
- 26.67
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.006
- 50.95
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
This Part Fits the Following OEM/Substitute Numbers:
004 159 13 03, 09482-00606, 09482-00615, 1208, 12290-RBJ-003, 12290-RMX-013, 12290-RWO-003, 12293-PHM-A01, 1822A022, 18840-11051, 18845-08200, 18845-08201, 18845-11160, 18850-11050, 22401 AA630, 22401 AA670, 22401 AA751, 22401 AA761...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Toyota Camry | V | 3456 | 6 Cyl 3.5L | - |
- Autolite AI5325 Iridium Ultra Spark Plug
- Gap .044 (in)
- Iridium Ultra Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.465
- 11.81
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 1.05
- 26.67
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.006
- 50.95
-
Features:
- Engineered with an iridium-enhanced laser-welded fine-wire center electrode that provides focused ignition, optimal ignitability, and maximum performance.
- Its proprietary platinum ground electrode provides increased durability and resistance to wear, extending the life of the plug.
- The tapered ground wire enhances ignitability for improved combustion and performance.
- The high alumina ceramic multi-rib insulator insulator provides thermal conductivity and superior insulation for increased strength & prevents flash-over.
- The copper core within the plug provides reliable performance with higher thermal conductivity.
- Autolite® Iridium Ultra® is equipped with a laser welded iridium enhanced fine-wire center electrode that ensures your engine runs at maximum performance; while its double precious metal design provides increased durability, allowing your engine to maintain desired performance levels for longer. Iridium Ultra delivers optimal fuel efficiency, acceleration, and ignitability, making it the best OE replacement plug choice for modern engines.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Toyota Camry | V | 3456 | 6 Cyl 3.5L | - |
- Performance Air Intake System
- Textured Black; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 3.1 HP At 5458 RPM;Not Legal For Sale Or Use In California 69 Series - Metal Intake Kit For Sport Compact & Sports Car; Black [CA]
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 3.1 Hp @ 5458 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-5147
- Item Weight: 9.200 Lbs. (4.2 Kg)
- RPM: 5458
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- System Type: Cold Air
- Clamp Quantity: 5
- Intake Pipe Color: Wrinkle Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Horse Power Increase: 3 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Toyota Camry | L | 2487 | 4 Cyl 2.5L | 152 |
- Performance Air Intake System
- Textured Black; Includes Air Filter/Tubing; Estimated Horsepower Gain 5.3 HP At 5326 RPM;CARB E.O. D-269-91 69 Series - Metal Intake Kit For Sport Compact & Sports Car; Black [CA]
- K/N s easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake tubing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in an attractive black powdercoated finish.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 5.3 Hp @ 5326 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: 33-2443
- Item Weight: 5.200 Lbs. (2.4 Kg)
- RPM: 5326
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Not Flanged
- System Type: Cold Air
- Clamp Quantity: 4
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Horse Power Increase: 5 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- The K&N 69-8622TTK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake tubing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake for a guaranteed power gain. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8622TTK air intake comes with a replacement K&N high-flow air filter and an aluminum intake tube that easily connects to your vehicle's factory air box and throttle body. The intake tube has an attractive black powdercoated finish that's made to last and it accommodates the factory crank case vent hose. The air filter can be used for up to 50,000 miles before servicing is needed depending on driving conditions. This air intake system is designed for easy installation and requires commonly available tools to do the job. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Toyota Camry | V | 3456 | 6 Cyl 3.5L | XSE | - |
- Performance Air Intake System
- Textured Black; Includes Air Filter/Tubing; Estimated Horsepower Gain 5.3 HP At 5326 RPM;CARB E.O. D-269-91
- K/N s easy-to-install Typhoon air intake system replaces the restrictive factory air filter and air intake tubing delivering a guaranteed power gain. The low-restriction aluminum intake tube comes in an attractive black powdercoated finish.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 5.3 Hp @ 5326 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: 33-2443
- Item Weight: 5.200 Lbs. (2.4 Kg)
- RPM: 5326
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Not Flanged
- System Type: Cold Air
- Clamp Quantity: 4
- Intake Pipe Color: Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Horse Power Increase: 5 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- The K&N 69-8622TTK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system. The restrictive factory air filter and air intake tubing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake for a guaranteed power gain. More air means more usable power and acceleration throughout the engine's RPM range. The 69-8622TTK air intake comes with a replacement K&N high-flow air filter and an aluminum intake tube that easily connects to your vehicle's factory air box and throttle body. The intake tube has an attractive black powdercoated finish that's made to last and it accommodates the factory crank case vent hose. The air filter can be used for up to 50,000 miles before servicing is needed depending on driving conditions. This air intake system is designed for easy installation and requires commonly available tools to do the job. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | Sub Model | CID |
|---|---|---|---|---|---|
| 2018 - Toyota Camry | V | 3456 | 6 Cyl 3.5L | XSE | - |
- Performance Air Intake System
- Textured Black; Includes Air Filter/Heat Shield/Tubing; Estimated Horsepower Gain 3.1 HP At 5458 RPM;Not Legal For Sale Or Use In California
- K/N s mandrel-bent aluminum cold air intake systems are guaranteed to provide an increase in horsepower and torque; and are protected by the K/N No-Hassle Lifetime Limited Warranty.
- Typhoon Cold Air Induction Kit
- Product Attributes:
- Oil Included: Filter Is Pre-oiled
- Clamp Style: Worm Gear
- Coupler Color: Black
- Mounting Hardware Included: Yes
- WARNING CA Proposition 65: Yes
- Estimated Horse Power Gain: 3.1 Hp @ 5458 Rpm
- California Restricted: Not Legal For Sale Or Use In California
- TUV Approved (Europe): No
- Replacement Filter: Ru-5147
- Item Weight: 9.200 Lbs. (4.2 Kg)
- RPM: 5458
- Filter Material: Cotton Gauze
- Air Filter Outlet Shape: Round
- System Type: Cold Air
- Clamp Quantity: 5
- Intake Pipe Color: Wrinkle Black
- Clamp Color: Natural
- Mass Air Flow Sensor Included: Mass Air Flow Sensor Adapter Included When Required
- Clamp Material: Stainless Steel
- Prop 65 (C, R or CR): Cr
- Intake Pipe Material: Aluminum
- Horse Power Increase: 3 Hp
- Air Filter Element Washable: Yes
- Couplers Included: 2
- Package Material: Corrugated
- Filter Color: Red
- Prop 65 Warning Label: Https://www.knfilters.com/images/l/prop65.jpg
- Package Type: Box
- Air Box Included: No
- Street Legal: No
-
Features:
- Guaranteed To Increase Horsepower
- Designed To Improve Throttle Response And Engine Sound
- Free Flowing Aluminum Tube
- Easy To Install Usually In 90 Minutes or Less
- Lasts Up To 100000 Miles Before Service Is Required
- Replaces Entire Factory Air Intake System
- Washable And Reusable Lifetime Air Filter
- K&N Million Mile Limited Warranty
- Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Toyota Camry | L | 2487 | 4 Cyl 2.5L | 152 |
- Autolite XP5325 Iridium XP Spark Plug
- Gap .044 (in)
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.465
- 11.81
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 1.05
- 26.67
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.006
- 50.95
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Toyota Camry | V | 3456 | 6 Cyl 3.5L | - |
- Autolite XP5325 Iridium XP Spark Plug
- OE Style
- Iridium XP Spark Plug
- Product Attributes:
- Center Electrode Projection: Mid Projection
- Center Electrode Design: Fine Wire
- Center Electrode Insulator Tip Projection:
- 0.133
- 3.38
- Seat Type: Flat
- Washer Included: Yes
- Electrical Terminal Type: Non-removable Nut
- Ground Electrode Quantity: 1
- Grade Type: Performance
- Core Nose Length:
- 0.465
- 11.81
- Washer Type: Crush
- Ground Electrode Tip Material: Platinum
- Center Electrode Core Material: Copper
- Hex Type: Hex
- Resistor Type: Yes
- Insulator Material: Ceramic
- Indexed: No
- Hex Size: 5/8
- Reach:
- 1.05
- 26.67
- Center Electrode Tip Material: Iridium
- Ground Electrode Tip Design: Taper Cut
- Pre-Gap Size:
- 0.044
- 1.12
- Resistance: 4000
- Insulator Height:
- 2.006
- 50.95
-
Features:
- Engineered with an Iridium-enhanced center electrode and fine-wire design that increases ignitability and provides a more focused ignition for improved engine performance.
- Its proprietary platinum ground electrode provides increased durability* and resistance to wear, extending the life of the plug.
- The tapered ground wire improves engine ignitability.
- Its high alumina multi-rib ceramic insulator provides thermal conductivity and superior insulation for increased strength while preventing flash-over.
- Designed with a nickel-plated shell that is corrosion resistant to provide increased durability for extended periods.
- Includes a lifetime limited warranty that guarantees optimum performance equal to OE designed plugs.
- Autolite® Iridium XP spark plugs are engineered with an iridium-enhanced fine-wire and a proprietary, platinum ground electrode, to increase durability*, while its tapered ground wire maximizes engine efficiency, delivering improved engine performance, fuel efficiency, acceleration, and ignitability.
-
Suggested Purchase Quantity: 6
- Most jobs typically require 6 of this item.
This Part Fits the Following OEM/Substitute Numbers:
958 905 601 00, 004 159 13 03, 06K 905 601 B, 06K 905 601 C, 06K 905 611 C, 09482-00606, 09482-00615, 11182-82Z10, 12 12 0 032 137, 12 12 0 032 138, 1208, 12290-PHM-A01, 12290-RBJ-003, 12290-RMX-003, 12290-RMX-004, 12290-RMX-013, 12290-RMX-014, 12290-RW0-003...VIEW MORE
Additional Fitment Information:
| Vehicle | Block | CC | Engine | CID |
|---|---|---|---|---|
| 2018 - Toyota Camry | V | 3456 | 6 Cyl 3.5L | - |
Showing 1 - 10 of 13 products
Loading...